DECA CB5000 క్లాస్ బూస్టర్ 5000E 12/24V బ్యాటరీ ఛార్జర్ మరియు స్టార్టర్ యూజర్ మాన్యువల్

1. పరిచయం

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your DECA CB5000 Class Booster 5000E battery charger and starter. Please read this manual thoroughly before using the device to ensure proper function and prevent injury or damage.

2. భద్రతా సమాచారం

హెచ్చరిక: ఈ భద్రతా సూచనలను పాటించడంలో విఫలమైతే విద్యుత్ షాక్, అగ్ని ప్రమాదం, తీవ్రమైన గాయం లేదా ఆస్తి నష్టం సంభవించవచ్చు.

• Always wear appropriate personal protective equipment, including eye protection and gloves, when working with batteries.
• Ensure the work area is well-ventilated to disperse explosive gases produced by batteries during charging.
• Never smoke or allow sparks or flames near the battery or charger.
• Connect and disconnect battery clamps only when the charger is switched off and unplugged from the mains power.
• Avoid touching uninsulated parts of the output connectors or battery terminals.
• వర్షం లేదా అధిక తేమ ఛార్జర్‌ను బహిర్గతం చేయవద్దు.
• Keep children and unauthorized persons away from the charger and battery during operation.
• పవర్ కార్డ్ దెబ్బతిన్నట్లయితే, ప్రమాదాన్ని నివారించడానికి తయారీదారు, దాని సేవా ఏజెంట్ లేదా అదే విధంగా అర్హత కలిగిన వ్యక్తులు దానిని భర్తీ చేయాలి.

3. ఉత్పత్తి ముగిసిందిview

The DECA CB5000 Class Booster 5000E is a robust, wheeled battery charger and starter designed for 12V and 24V lead-acid batteries. It features multiple charging positions and a powerful starting current for various vehicle types.

మూర్తి 1: ముందు view of the DECA CB5000 Class Booster 5000E, showing its yellow casing, control panel, and wheels for portability.

Figure 2: Close-up of the control panel, displaying the analog ammeter, voltage selector (12V/24V), and charging current adjustment knobs.

4. సెటప్

1. అన్‌ప్యాకింగ్: Carefully remove the charger from its packaging. Inspect for any signs of damage during transit.
2. అసెంబ్లీ: Attach the wheels and handle (if not pre-assembled) according to the diagrams provided in the separate assembly guide. Ensure all fasteners are securely tightened.
3. ప్లేస్‌మెంట్: Position the charger on a stable, level surface in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
4. పవర్ కనెక్షన్: Ensure the charger's main switch is in the 'OFF' position. Connect the power cord to a grounded 230V AC 50-60Hz electrical outlet.

5. ఆపరేటింగ్ సూచనలు

5.1. బ్యాటరీ ఛార్జింగ్

1. బ్యాటరీని సిద్ధం చేయండి: Ensure the battery terminals are clean and free of corrosion. If the battery has removable caps, check the electrolyte level and top up with distilled water if necessary.
2. బ్యాటరీకి కనెక్ట్ చేయండి: With the charger switched OFF and unplugged, connect the RED (+) positive clamp to the positive (+) battery terminal. Connect the BLACK (-) negative clamp to the negative (-) battery terminal. For batteries installed in a vehicle, connect the negative clamp బ్యాటరీ మరియు ఇంధన లైన్ నుండి దూరంగా ఉన్న వాహన చట్రానికి.
3. వాల్యూమ్ ఎంచుకోండిtage: వాల్యూమ్ సెట్ చేయండిtage selector switch on the charger to match the battery voltagఇ (12V లేదా 24V).
4. Select Charging Current: Adjust the charging current knob to the desired charging position (e.g., 'Min' for slow charge, 'Max' for fast charge, or an intermediate position). Refer to your battery's specifications for recommended charging rates.
5. ఛార్జింగ్ ప్రారంభించండి: Plug the charger into the mains power outlet and switch the charger ON. The ammeter will indicate the charging current.
6. మానిటర్: Periodically check the ammeter. As the battery charges, the current will gradually decrease. Charging is complete when the ammeter reads near zero or stabilizes at a very low current.
7. డిస్‌కనెక్ట్: Switch the charger OFF and unplug it from the mains. Then, disconnect the negative (-) clamp, followed by the positive (+) clamp.

5.2. Engine Starting (Booster Function)

CAUTION: Do not attempt to start an engine if the battery is frozen or severely damaged.

1. వాహనాన్ని సిద్ధం చేయండి: Ensure the vehicle's ignition is OFF and all accessories are turned off.
2. బ్యాటరీకి కనెక్ట్ చేయండి: With the charger switched OFF and unplugged, connect the RED (+) positive clamp to the positive (+) battery terminal. Connect the BLACK (-) negative clamp to the vehicle chassis, away from the battery and fuel line.
3. వాల్యూమ్ ఎంచుకోండిtage: వాల్యూమ్ సెట్ చేయండిtage selector switch on the charger to match the vehicle's battery voltagఇ (12V లేదా 24V).
4. Select Starting Current: Set the charging current knob to the 'Max' or 'Booster' position.
5. ప్రారంభ ఇంజిన్: Plug the charger into the mains power outlet and switch the charger ON. Wait approximately 60-120 seconds for the battery to receive a preliminary charge. Then, attempt to start the engine for no more than 5 seconds. If the engine does not start, wait at least 60 seconds before trying again. Do not exceed three starting attempts.
6. డిస్‌కనెక్ట్: Once the engine starts, switch the charger OFF and unplug it from the mains. Then, disconnect the negative (-) clamp, followed by the positive (+) clamp.

6. నిర్వహణ

• శుభ్రపరచడం: Disconnect the charger from the mains before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
• కేబుల్ తనిఖీ: Regularly inspect the power cord and battery cables for any signs of damage, cuts, or fraying. Replace damaged cables immediately through authorized service personnel.
• నిల్వ: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure cables are neatly coiled and not kinked.

7. ట్రబుల్షూటింగ్

If troubleshooting steps do not resolve the issue, please contact DECA customer support or an authorized service center.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, spare parts, or service inquiries, please contact DECA customer service or an authorized DECA service center. Keep your purchase receipt as proof of purchase.