Tycon Power TP-SCPOE-1248 48V POE/SOLAR DUAL INPUT 12V BATTERY CHARGE CONTROL

1. ఓవర్view

The Tycon Power Systems POE/Solar charge controllers are designed with dual inputs to charge batteries from both a Power over Ethernet (PoE) source and a secondary source such as solar panels. This dual input capability ensures redundancy and maintains 100% uptime for critical applications. The solar input is prioritized, minimizing grid power usage when sunlight is available. These controllers feature built-in PoE inserters, and the 12V battery model includes an integral DC to DC converter that delivers 48V at the PoE output port. They are equipped with comprehensive electronic protections against short circuits, reverse current, overvoltage, overcharge, and over-discharge. The integrated over-discharge protection and low self-consumption significantly extend battery life. Five LED indicators provide quick visual status updates for PoE source, solar panel input, battery charging status, load output activation, and reverse battery polarity warnings. Connections for solar and battery are via 4-wire terminals (up to 10AWG), while PoE input and output utilize 2 RJ45 shielded connectors. The controllers are protected by a standard replaceable fuse.

Figure 1: Tycon Power TP-SCPOE-1248 Solar Controller with its various ports and a typical connection diagram showing solar panel, 12V battery, PoE data input, 12V auxiliary output, and PoE output to an AP client or router/switch/PC.

2 ఫీచర్లు

• Dual Input Charging: Charges 12V batteries from both solar panels (up to 8A) and/or passive PoE sources (18-57V, up to 2.5A).
• Integrated DC to DC Converter: Provides 48V 0.375A passive PoE output.
• సహాయక అవుట్‌పుట్: Features a secondary wire terminal 12V 1.5A output.
• Electronic Protections: Full protection against short circuit, reverse current, overvoltage, overcharge, and over-discharge.
• Low Self-Consumption: Ensures battery is not over-discharged, extending battery life. Self-consumption is less than 0.5W.
• LED సూచికలు: Five LEDs for quick status checks: PoE input, Solar input, Battery charging, Load output, and Reverse polarity warning.
• కాంపాక్ట్ డిజైన్: Suitable for high-temperature operation.
• మౌంటు: Includes DIN Rail Mounting Kit.

3 అప్లికేషన్లు

The TP-SCPOE-1248 is versatile and suitable for a variety of remote power and surveillance applications:

• Remote Power Systems
• Surveillance and Sensor Systems
• Wireless Stations (AP / Client / Repeaters)
• Uninterruptible Power Supply (UPS) Systems
• Lighting, Fences, and Gates

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps for proper installation of your TP-SCPOE-1248 controller:

1. మౌంటు: Securely mount the controller using the included DIN Rail Mounting Kit in a suitable location, protected from direct weather exposure if outdoors.
2. బ్యాటరీ కనెక్షన్: Connect a 12V battery to the "BAT" terminals. Ensure correct polarity (+ to + and - to -). A reverse polarity warning LED will illuminate if connected incorrectly. Use wire size up to 10AWG.
3. సోలార్ ప్యానెల్ కనెక్షన్: Connect your solar panel (12V, up to 8A) to the "SOL" terminals. Observe correct polarity. The solar panel takes priority for charging when sunlight is available.
4. PoE Input Connection: Connect the passive PoE input source (18-57V, up to 2.5A) to the "PoE IN" RJ45 port. The PoE pinout is 4,5V+ and 7,8V-.
5. PoE Output Connection: Connect your PoE-powered device (e.g., AP client, IP camera) to the "PoE OUT" RJ45 port. This port provides 48V 0.375A passive PoE.
6. Auxiliary Output Connection (Optional): If needed, connect a 12V device to the secondary wire terminal 12V 1.5A output.
7. ఫ్యూజ్ ఇన్‌స్టాలేషన్: Ensure the standard replaceable fuse is correctly installed in its holder.
8. కేబుల్ నిర్వహణ: Route all cables neatly and securely to prevent accidental disconnections or damage.

ముఖ్యమైన: Always ensure power sources are disconnected before making or changing any connections to prevent damage to the unit or connected devices.

5. ఆపరేటింగ్ సూచనలు

The TP-SCPOE-1248 operates automatically once connected. Monitor the LED indicators for status information:

• PoE LED: Illuminates when power is being supplied by the PoE input source.
• SOL LED: Illuminates when power is being supplied by the solar panel.
• CHA LED: బ్యాటరీ ప్రస్తుతం ఛార్జ్ అవుతోందని సూచిస్తుంది.
• LOA LED: Indicates that the load output (PoE OUT and 12V Aux) is active.
• REV LED: A warning indicator that illuminates if the battery is connected with reverse polarity. Immediately disconnect and correct the battery connection if this LED is on.

The controller prioritizes solar power when available to minimize grid power usage. It automatically manages battery charging and discharge to protect the battery and connected loads.

6. నిర్వహణ

The TP-SCPOE-1248 is designed for low maintenance. However, periodic checks are recommended:

• ఫ్యూజ్ చెక్: The controller is protected by a standard replaceable fuse. If the unit stops functioning, check and replace the fuse if blown. Always replace with a fuse of the same type and rating.
• కనెక్షన్లు: Periodically inspect all wire and RJ45 connections to ensure they are secure and free from corrosion or damage.
• శుభ్రపరచడం: Keep the unit free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• బ్యాటరీ ఆరోగ్యం: Regularly check the health of your connected 12V battery as per the battery manufacturer's recommendations.

7. ట్రబుల్షూటింగ్

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

For warranty information and technical support, please contact Tycon Systems directly. Refer to their official webఅత్యంత తాజా సంప్రదింపు వివరాలు మరియు వారంటీ నిబంధనల కోసం సైట్ లేదా ఉత్పత్తి ప్యాకేజింగ్.

తయారీదారు: టైకాన్ సిస్టమ్స్

మరింత సహాయం కోసం, సందర్శించండి product page on Amazon.com.