1. పరిచయం
This manual provides detailed instructions for the safe and efficient operation of your ADJ Sweeper Beam Quad LED fixture. The Sweeper Beam Quad LED is a professional stage lighting unit designed to produce dynamic lighting effects. It features eight powerful RGBW LEDs that create sweeping beams, pulse, and strobe effects with 270 degrees of tilt. This unit supports various operational modes including stand-alone, sound active, and DMX control.
2. భద్రతా సూచనలు
- Always connect the fixture to a grounded circuit.
- ఆపరేషన్కు ముందు అన్ని కనెక్షన్లు సురక్షితంగా ఉన్నాయని నిర్ధారించుకోండి.
- Do not operate the fixture if the power cord is damaged.
- కాంతి మూలానికి నేరుగా కంటికి గురికాకుండా ఉండండి.
- వేడెక్కకుండా ఉండటానికి ఫిక్చర్ చుట్టూ తగినంత వెంటిలేషన్ ఉండేలా చూసుకోండి.
- Disconnect from power before performing any maintenance or cleaning.
- This product is for professional use. Installation should be performed by qualified personnel.
3. సెటప్
3.1 అన్ప్యాకింగ్
Carefully unpack the fixture and inspect it for any damage during shipping. If any damage is found, contact your dealer immediately.
3.2 మౌంటు
The Sweeper Beam Quad LED includes mounting brackets for secure installation. Always use a safety hook on the rear panel as an additional safety measure when suspending the unit. Ensure the mounting surface can support the weight of the fixture.
3.3 పవర్ కనెక్షన్
Connect the fixture to a compatible power source using the provided IEC power cable. The unit supports daisy-chaining for power, allowing up to 4 units at 120V or 7 units at 230V to be connected from a single power outlet.
Figure 1: ADJ Sweeper Beam Quad LED fixture overview. This image displays the main unit with its eight distinct LED lenses, highlighting the robust black housing and overall design.
4. ఆపరేటింగ్ మోడ్లు
The Sweeper Beam Quad LED offers multiple operational modes to suit various lighting requirements.
4.1 స్టాండ్-అలోన్ మోడ్
In stand-alone mode, the fixture operates using its built-in programs. Use the 4-button DMX LED display on the unit to select desired pre-programmed sequences and effects.
4.2 Sound Active Mode
The sound active mode allows the fixture to react to music and audio input. The internal microphone detects sound, and the light effects will pulse and change in sync with the beat. Adjust sensitivity via the control panel if available.
4.3 DMX కంట్రోల్ మోడ్
For advanced control, connect the fixture to a DMX controller using a wired digital network. The unit supports 1, 6, 35, or 39 DMX channels, providing comprehensive control over individual LEDs, tilt, dimming (0-100%), pulse, and strobe effects. Refer to the DMX channel chart (typically found in a separate DMX manual or on the manufacturer's website) for specific channel functions.
చిత్రం 2: ఉదాample of dynamic light beams produced by the Sweeper Beam Quad LED. This image illustrates the sweeping motion and vibrant color mixing capabilities of the fixture in operation.
మూర్తి 3: మరొకటి view of the Sweeper Beam Quad LED's light output, showcasing a fan-like beam pattern. This demonstrates the fixture's ability to create diverse visual effects.
5. నిర్వహణ
5.1 శుభ్రపరచడం
To maintain optimal light output and extend the lifespan of your fixture, regularly clean the lenses and exterior casing. Use a soft, lint-free cloth and a mild glass cleaner. Ensure the fixture is disconnected from power before cleaning.
5.2 LED Lifespan
The LEDs in this fixture are rated for approximately 50,000 hours of use. Due to the low heat output of LED technology, there is no need for duty cycles, allowing for continuous operation.
6. ట్రబుల్షూటింగ్
- శక్తి లేదు: Check the power cable connection at both the fixture and the power outlet. Ensure the outlet is active.
- లైట్ అవుట్పుట్ లేదు: Verify the fixture is receiving power. Check the selected operating mode (e.g., ensure DMX signal is present if in DMX mode).
- Fixture Not Responding to DMX: Confirm DMX cable connections are secure. Check DMX address settings on the fixture and controller. Ensure the DMX controller is sending a signal.
- Abnormal Movement/Stuck Beam: Disconnect power, wait a few moments, then reconnect. If the issue persists, contact customer support.
7. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | SWEEPER BEAM QUAD LED (SWE199) |
| కాంతి మూలం | 8 x 8-watt RGBW LEDs |
| టిల్ట్ ఉద్యమం | 270 డిగ్రీలు |
| DMX ఛానెల్లు | 1, 6, 35, లేదా 39 ఛానెల్లు |
| ఆపరేషనల్ మోడ్లు | Stand-Alone, Sound Active, DMX Control |
| మసకబారుతోంది | 0-100% ఎలక్ట్రానిక్ డిమ్మింగ్ |
| Strobe/Pulse Effect | అవును |
| విద్యుత్ వినియోగం | 81W |
| వాల్యూమ్tage | AC 120V / 230V (auto-sensing or selectable) |
| శక్తి మూలం | Corded Electric (IEC IN/OUT) |
| డైసీ చైన్ | Up to 4 units @ 120V, 7 units @ 230V |
| LED జీవితకాలం | సుమారు 50,000 గంటలు |
| మెటీరియల్ | మెటల్, ప్లాస్టిక్ |
| రంగు | నలుపు |
| వస్తువు బరువు | 12.76 పౌండ్లు (5.79 కిలోలు) |
| ఉత్పత్తి కొలతలు | 42 x 6.75 x 7.5 అంగుళాలు (106.7 x 17.1 x 19.1 సెం.మీ.) |
| ఆమోదాలు | ETL ఆమోదించబడింది |
8. వారంటీ మరియు మద్దతు
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official ADJ Products webసైట్. కస్టమర్ సేవ కోసం సంప్రదింపు వివరాలను సాధారణంగా అక్కడ చూడవచ్చు.
