Vimar 01910 ప్రోగ్రామబుల్ బ్యాటరీ-పవర్డ్ థర్మోస్టాట్ యూజర్ మాన్యువల్

1. పరిచయం

The Vimar 01910 is an electronic programmable thermostat designed for ON/OFF control of ambient temperature in heating and air conditioning systems. It offers daily and weekly programming capabilities, allowing users to set desired temperatures for different times throughout the week. This device operates on batteries, eliminating the need for a mains power connection, and is suitable for wall installation.

2. భద్రతా సమాచారం

• Always disconnect power to the heating/cooling system before installation or maintenance.
• Installation should be performed by qualified personnel in accordance with local electrical codes.
• Do not expose the thermostat to direct sunlight, drafts, or heat sources, as this may affect temperature readings.
• Keep batteries out of reach of children. Dispose of used batteries responsibly.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీ కింది అంశాలను కలిగి ఉందని ధృవీకరించండి:

• Vimar 01910 Programmable Thermostat
• మౌంటు మరలు మరియు గోడ ప్లగ్స్
• ఇన్స్ట్రక్షన్ మాన్యువల్

గమనిక: AA LR6 1.5V batteries are required for operation and are not included in the package.

4. ఉత్పత్తి ముగిసిందిview

The Vimar 01910 thermostat features a clear digital display and intuitive controls for easy operation.

మూర్తి 4.1: ముందు view of the Vimar 01910 thermostat with its digital display showing time and temperature, and the central control button.

4.1 ప్రదర్శన అంశాలు

• సమయ ప్రదర్శన: ప్రస్తుత సమయాన్ని చూపుతుంది.
• ఉష్ణోగ్రత ప్రదర్శన: Shows the current ambient temperature or the set temperature.
• Day of Week Indicators: Displays the current day (Mon, Tue, Wed, Thu, Fri, Sat, Sun).
• Programming Graph: A visual representation of the daily temperature program.
• Operating Mode Indicators: Icons for manual mode, programmed mode, etc.

4.2 నియంత్రణ బటన్లు

Figure 4.2: Control diagram highlighting the central 'mouse' button (3) and other function buttons (6-11) located under the flip cover.

• Central 'Mouse' Button (3): Used for navigating menus, adjusting values, and confirming selections. Pressing it typically confirms a setting, while rotating it changes values.
• Flip-up Cover: Protects additional programming and function buttons.
• ఫంక్షన్ బటన్లు (6-11): These buttons, located under the flip cover, are used for advanced programming, mode selection, and setting specific parameters. Refer to the detailed programming section for their specific functions.

5. సంస్థాపన

The Vimar 01910 thermostat is designed for quick wall installation, either directly on the wall or over a flush-mounted box.

5.1 మౌంటు స్థానం

Choose a suitable location on an interior wall, approximately 1.5 meters (5 feet) from the floor. Avoid locations near windows, doors, air vents, or direct heat sources that could interfere with accurate temperature sensing.

5.2 వైరింగ్

The thermostat uses a relay output (5(2) A 250 V) for ON/OFF control. It typically connects to the boiler or air conditioning unit via two wires. The terminals are usually labeled 'NO' (Normally Open) and 'C' (Common) or similar. Consult your heating/cooling system's manual for specific wiring requirements.

చిత్రం 5.1: వెనుక view of the thermostat, illustrating the mounting points and the area for electrical connections.

1. Carefully detach the front cover from the back plate.
2. Mount the back plate securely to the wall using the provided screws and wall plugs. Ensure it is level.
3. Connect the two control wires from your heating/cooling system to the appropriate terminals on the back plate. Polarity is generally not an issue for simple ON/OFF control.
4. Insert two fresh AA LR6 1.5V batteries into the battery compartment. Observe correct polarity.
5. Reattach the front cover to the back plate, ensuring it clicks securely into place.

6. ప్రారంభ సెటప్

After installing the batteries, the thermostat will power on. You will need to set the current time and day.

1. సమయాన్ని సెట్ చేయండి: Use the central 'mouse' button to adjust the hour and minute. Press the button to confirm each setting.
2. సెట్ డే: After setting the time, proceed to set the current day of the week.
3. ఉష్ణోగ్రత యూనిట్: If applicable, select between Celsius (°C) and Fahrenheit (°F).

Refer to the on-screen prompts and the detailed programming instructions for specific button presses.

7. ఆపరేటింగ్ మోడ్‌లు

The Vimar 01910 offers different operating modes to suit your needs.

7.1 Programmed Mode

In this mode, the thermostat follows the daily or weekly temperature schedule you have set. This is the primary mode for energy efficiency and comfort.

7.2 మాన్యువల్ మోడ్

Manual mode allows you to override the programmed schedule and set a constant temperature. This is useful for temporary changes or if you prefer a fixed temperature.

• To activate Manual Mode: Open the flip-up cover and press the button with the 'hand' symbol (if available, or refer to your specific model's button layout). The 'hand' symbol should appear on the display.
• To adjust temperature in Manual Mode: Use the central 'mouse' button to set the desired temperature.
• To exit Manual Mode: Press the 'hand' symbol button again until the programming graph reappears on the display.

7.3 తాత్కాలిక ఓవర్‌రైడ్

Some models allow for a temporary temperature override in programmed mode. By rotating the central 'mouse' button, you can temporarily adjust the temperature. The thermostat will revert to the programmed schedule after a set period or at the next program change.

8. Programming the Schedule

The Vimar 01910 allows for detailed daily or weekly programming with multiple temperature levels.

1. ప్రోగ్రామింగ్ మోడ్‌ని నమోదు చేయండి: Open the flip-up cover and locate the programming button (often labeled 'P' or similar). Press it to enter programming mode.
2. Select Day: Use the central 'mouse' button to select the day you wish to program (e.g., Monday).
3. Set Time Periods and Temperatures: For each day, you can typically set multiple time periods (e.g., morning, day, evening, night) and assign a specific temperature to each period. The thermostat usually supports 3 distinct temperature levels (e.g., Comfort, Economy, Anti-freeze).
4. కాపీ ఫంక్షన్: The thermostat often includes a 'Copy' function (button 'C' in Figure 4.2) to replicate a day's program to other days of the week, simplifying setup.
5. ప్రోగ్రామింగ్ మోడ్ నుండి నిష్క్రమించు: Once all desired programs are set, press the programming button again or wait for the thermostat to automatically exit programming mode.

For detailed step-by-step instructions on programming, refer to the specific tutorial videos available on the Vimar webసైట్.

9. బ్యాటరీ భర్తీ

The thermostat is powered by two AA LR6 1.5V batteries. When the battery level is low, a low battery indicator will appear on the display.

1. Carefully detach the front cover from the back plate.
2. కంపార్ట్మెంట్ నుండి పాత బ్యాటరీలను తొలగించండి.
3. Insert two new AA LR6 1.5V batteries, ensuring correct polarity (+ and -).
4. ముందు కవర్‌ని మళ్లీ అటాచ్ చేయండి.

The thermostat retains its programming settings during battery replacement for a short period, but it is advisable to replace them promptly.

10. నిర్వహణ

Vimar 01910 థర్మోస్టాట్‌కు కనీస నిర్వహణ అవసరం.

• శుభ్రపరచడం: Wipe the thermostat's surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
• బ్యాటరీ తనిఖీ: Replace batteries annually or when the low battery indicator appears to ensure continuous operation.

11. ట్రబుల్షూటింగ్

మీ Vimar 01910 థర్మోస్టాట్‌తో మీకు సమస్యలు ఎదురైతే, ఈ క్రింది సాధారణ సమస్యలు మరియు పరిష్కారాలను చూడండి:

• ప్రదర్శన ఖాళీగా ఉంది: Check if batteries are correctly inserted and charged. Replace batteries if necessary.
• Heating/Cooling system not responding: Ensure the thermostat is in the correct operating mode (e.g., not in 'OFF' mode). Check wiring connections. Verify the heating/cooling system itself is functioning.
• తప్పు ఉష్ణోగ్రత రీడింగ్: థర్మోస్టాట్ ప్రత్యక్ష సూర్యకాంతి, చిత్తుప్రతులు లేదా ఉష్ణ వనరులకు గురికాకుండా చూసుకోండి.
• ప్రోగ్రామింగ్ సమస్యలు: Review the programming steps in Section 8 or consult the online tutorials for detailed guidance.

If problems persist, contact Vimar customer support or a qualified technician.

12. స్పెసిఫికేషన్లు

13. వారంటీ మరియు మద్దతు

This product is guaranteed for 2 years. Please retain your order number for warranty claims.

For additional instructions, tutorials, and support, please visit the official Vimar webసైట్:

faidate.vimar.com

No official product videos from the seller were found that meet the embedding criteria for this manual.