పరిచయం
The Alpena 77259 Dash Litz Blue LED lighting kit provides custom accent lighting for your vehicle's interior. This kit includes four micro LEDs designed for easy installation and operation, enhancing the aesthetic appeal of your vehicle's dashboard or footwell areas.
భద్రతా సమాచారం
- Ensure your vehicle's engine is off and the ignition is in the "OFF" position before installation.
- Do not obstruct driver's view or interfere with vehicle controls, airbags, or safety features.
- Avoid installing in areas exposed to extreme heat or moisture.
- Use only with a 12-volt DC power source.
- If you are unsure about any installation step, consult a qualified automotive technician.
ప్యాకేజీ విషయాలు
Verify that all components are present in your Alpena 77259 Dash Litz kit:
- 4 x Micro Blue LEDs with wiring
- 1 x 12-Volt Power Plug (cigarette lighter adapter) with ON/OFF switch
- Self-adhesive 3M™ foam tape (pre-applied or included for attachment)
Image: Alpena 77259 Dash Litz product packaging, showing the four micro LEDs and the 12V power plug.
Image: The four micro LEDs, their connecting wires, and the 12-volt power plug with an integrated ON/OFF switch, laid out unlit.
సెటప్ మరియు ఇన్స్టాలేషన్
- ప్లాన్ ప్లేస్మెంట్: Determine the desired locations for the four micro LEDs within your vehicle's interior. Common areas include under the dashboard, footwells, or along console edges. Ensure the wiring can reach the 12-volt power outlet without obstruction.
- శుభ్రమైన ఉపరితలం: Thoroughly clean the chosen installation surfaces with an alcohol wipe to remove any dust, dirt, or grease. Allow the surface to dry completely. This ensures optimal adhesion of the foam tape.
- Attach LEDs: Peel the backing from the self-adhesive 3M™ foam tape on each micro LED. Carefully press each LED firmly onto the cleaned surface for at least 30 seconds to secure it.
- రూట్ వైరింగ్: Neatly route the wiring from each LED to the central 12-volt power plug. Use cable ties or clips (not included) to secure the wires and prevent them from interfering with vehicle operation or being damaged.
- పవర్ కనెక్ట్ చేయండి: Insert the 12-volt power plug into your vehicle's cigarette lighter or auxiliary power outlet.
ఆపరేటింగ్ సూచనలు
- పవర్ ఆన్: Once the 12-volt power plug is inserted into the vehicle's outlet, locate the ON/OFF switch on the power plug. Slide the switch to the "ON" position. The micro LEDs will illuminate with a blue light.
- పవర్ ఆఫ్: To turn off the LEDs, slide the switch on the 12-volt power plug to the "OFF" position.
Image: The four micro LEDs illuminated with a blue light, connected to their wiring and the 12-volt power plug.
Image: The Alpena Dash Litz LEDs installed in a vehicle, casting a blue glow on the dashboard gauges and surrounding area.
నిర్వహణ
- శుభ్రపరచడం: To clean the LED units, gently wipe them with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- సంశ్లేషణ: If an LED unit becomes loose, re-secure it using new automotive-grade double-sided adhesive tape. Ensure the surface is clean and dry before re-application.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| LED లు వెలిగించవు. |
|
|
| One or more LEDs flicker or are dim. |
|
|
స్పెసిఫికేషన్లు
- మోడల్: Alpena 77259 Dash Litz
- ఇన్పుట్ వాల్యూమ్tage: 12 వోల్ట్స్ DC
- బల్బ్ రకం: LED (Micro LEDs)
- రంగు: నీలం
- కొలతలు (ప్యాకేజింగ్): సుమారు 5.1 x 4 x 1.3 అంగుళాలు
- Weight (total package): సుమారు 4 ఔన్సులు
వారంటీ మరియు మద్దతు
For warranty information or technical support regarding your Alpena 77259 Dash Litz Blue LED lighting kit, please refer to the contact information provided on the product packaging or visit the official Alpena webవారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
You can visit the Alpena Store for more information: Alpena Official Store
