పరిచయం
The Blum 20K7041 Aventos HK Angle Restriction Clip is an essential component designed to limit the opening angle of cabinet doors equipped with Blum Aventos HK lift systems. This clip specifically restricts the door's opening to 100 degrees, preventing it from colliding with adjacent walls, ceilings, or other furniture, thereby protecting both the door and surrounding structures from damage. It is made from durable plastic (PA6-GF30) and is intended for easy integration into the Aventos HK mechanism.
సెటప్ మరియు ఇన్స్టాలేషన్
Installation of the 100-degree angle restriction clip is straightforward and designed for quick integration into your Blum Aventos HK lift mechanism. Ensure the cabinet door is in a closed or partially open position before beginning installation.
Image: Two black plastic clips designed to limit the opening angle of cabinet doors. Each clip has the marking '20K7041-01.01 >PA6-GF30<', indicating the model number and material. These clips are inserted into the Aventos HK lift mechanism.
- Identify the Mechanism: Locate the Blum Aventos HK lift mechanism on the inside of your cabinet, typically near the top corners of the door opening.
- Locate the Clip Slot: Within the Aventos HK mechanism, there is a designated slot or opening where the angle restriction clip is to be inserted. This slot is specifically designed to receive the "spoke clip" type of installation.
- Insert the Clip: Align the Blum 20K7041 angle restriction clip with the slot. Gently but firmly push the clip into place until it clicks or sits securely. Ensure it is fully seated and does not wobble.
- పరీక్ష కార్యాచరణ: Slowly open the cabinet door to its full extent. The clip should engage and stop the door at approximately a 100-degree angle, preventing it from opening further.
- Repeat for Second Mechanism (if applicable): If your cabinet door uses two Aventos HK mechanisms, repeat the installation process for the second clip on the other side.
For detailed visual instructions, refer to the official Blum Aventos HK installation guides or videos available on the manufacturer's webసైట్.
ఆపరేటింగ్ సూచనలు
Once correctly installed, the Blum 20K7041 angle restriction clip operates passively. It functions by physically limiting the range of motion of the Aventos HK lift mechanism, ensuring the cabinet door does not open beyond the specified 100-degree angle. No active operation or adjustment is required after installation. Simply open and close your cabinet door as usual, and the clip will automatically restrict its travel.
నిర్వహణ
The Blum 20K7041 angle restriction clip requires minimal maintenance. Regular inspection is recommended to ensure continued functionality:
- శుభ్రపరచడం: If necessary, wipe the clip with a soft, damp దుమ్ము లేదా చెత్తను తొలగించడానికి వస్త్రం. కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్లను ఉపయోగించడం మానుకోండి.
- తనిఖీ: Periodically check the clip for any signs of wear, cracks, or damage. Ensure it remains securely seated within the Aventos HK mechanism.
- కార్యాచరణ తనిఖీ: Occasionally test the door's opening angle to confirm the clip is still effectively restricting it to 100 degrees.
If the clip appears damaged or is no longer performing its function, it should be replaced.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Door opens beyond 100 degrees. | Clip not installed correctly or has come loose. | Ensure the clip is fully and securely inserted into the designated slot in the Aventos HK mechanism. Re-insert if necessary. |
| Clip falls out of the mechanism. | Improper installation or clip is damaged. | Verify correct insertion. If the clip does not stay in place, it may be damaged and require replacement. |
| Door still hits adjacent objects. | Clip is installed but the 100-degree restriction is insufficient for the specific installation. | While this clip provides a 100-degree restriction, some installations may require a smaller opening angle (e.g., 83 degrees). Ensure this 100-degree clip is suitable for your specific clearance needs. Consider alternative restriction clips if available for your Aventos system. |
| Clip appears broken or cracked. | Physical damage due to impact or wear. | Replace the damaged clip with a new Blum 20K7041 angle restriction clip. |
స్పెసిఫికేషన్లు
- ఉత్పత్తి పేరు: Blum Inc. 20K7041 Aventos HK Angle Restriction Clip
- Restriction Angle: 100 డిగ్రీలు
- తయారీదారు: బ్లమ్
- పార్ట్ నంబర్: SO43458
- అంశం మోడల్ సంఖ్య: 4250496643458
- మెటీరియల్: PA6-GF30 (Polyamide 6 with 30% Glass Fiber)
- ముగించు: Powder Coated (as per specifications, typically refers to the mechanism)
- ఇన్స్టాలేషన్ విధానం: Spoke Clip
- మౌంటు రకం: Door Mount, Wall Mount (refers to the Aventos system)
- యూనిట్ కౌంట్: 1 Clip (Product is typically sold individually)
- బ్యాటరీలు అవసరం: నం
- ASIN: B00D7SQKOC
- మొదట అందుబాటులో ఉన్న తేదీ: మే 1, 2011
వారంటీ సమాచారం
Specific warranty details for the Blum 20K7041 Aventos HK Angle Restriction Clip are not provided in this manual. For information regarding product warranty, please refer to the official Blum website or contact Blum customer service directly. Keep your purchase receipt as proof of purchase.
కస్టమర్ మద్దతు
For further assistance, technical support, or inquiries regarding the Blum 20K7041 Aventos HK Angle Restriction Clip, please visit the official Blum webవారి కస్టమర్ సర్వీస్ విభాగాన్ని సైట్ చేయండి లేదా సంప్రదించండి. మీరు వారి మద్దతు పేజీలలో అదనపు వనరులు, తరచుగా అడిగే ప్రశ్నలు మరియు సంప్రదింపు సమాచారాన్ని కనుగొనవచ్చు.
Blum Official Webసైట్: www.blum.com
