1. పరిచయం
This manual provides comprehensive instructions for the proper installation and operation of the Tekonsha T-One T-Connector Harness, Model 118599. This product is designed to provide a 4-way flat trailer wiring connection for specific Ford Explorer, Ford Taurus, and Lincoln MKS vehicle models, enabling trailer lighting functions without requiring modifications to the vehicle's existing wiring system.
2. భద్రతా సమాచారం
- విద్యుత్ షాక్ లేదా వాహనం యొక్క విద్యుత్ వ్యవస్థకు నష్టం జరగకుండా నిరోధించడానికి ఏదైనా విద్యుత్ సంస్థాపనను ప్రారంభించే ముందు ఎల్లప్పుడూ వాహనం యొక్క బ్యాటరీని డిస్కనెక్ట్ చేయండి.
- షార్ట్ సర్క్యూట్లను నివారించడానికి అన్ని కనెక్షన్లు సురక్షితంగా మరియు సరిగ్గా ఇన్సులేట్ చేయబడ్డాయని నిర్ధారించుకోండి.
- Route wiring away from hot exhaust components, sharp edges, and moving parts to prevent damage.
- Verify all trailer lights are functioning correctly after installation and before towing.
- ఇన్స్టాలేషన్ ప్రక్రియలోని ఏ దశ గురించి మీకు ఖచ్చితంగా తెలియకపోతే, అర్హత కలిగిన ఆటోమోటివ్ టెక్నీషియన్ను సంప్రదించండి.
3. ప్యాకేజీ విషయాలు
The Tekonsha T-One T-Connector Harness kit includes the following components:
- T-One T-Connector Harness with ModuLite HD module
- 4-Way Flat Connector with cap
- Power wire (16 gauge bonded wire)
- ఫ్యూజ్ హోల్డర్ మరియు ఫ్యూజ్
- రింగ్ టెర్మినల్
- స్ప్లైస్ కనెక్టర్లు
- మౌంటు స్క్రూ
- కేబుల్ సంబంధాలు

Image 3.1: All components included in the Tekonsha T-One T-Connector Harness kit, featuring the main harness, ModuLite module, 4-way flat connector, power wire, fuse, and various installation accessories.
4. సెటప్ మరియు ఇన్స్టాలేషన్
The Tekonsha T-One T-Connector Harness is designed for a straightforward, do-it-yourself installation without requiring special tools or splicing into vehicle wires. Follow these steps carefully:
4.1. తయారీ
- సాధనాలను సేకరించండి: You will need basic hand tools such as a screwdriver, wire strippers/crimpers, and possibly a test light.
- Vehicle Access: Open the vehicle's trunk or tailgate and locate the access panels for the taillight assemblies. Remove these panels to expose the vehicle's wiring harness connectors.
- బ్యాటరీని డిస్కనెక్ట్ చేయండి: For safety, disconnect the negative terminal of the vehicle's battery.
4.2. Harness Connection
- Locate Vehicle Connectors: Identify the vehicle's taillight wiring harness connectors. These are typically located behind the taillight assemblies.
- Disconnect and Insert T-Connectors: Unplug the vehicle's wiring harness connector. Insert the corresponding T-One T-Connector into the vehicle's harness, ensuring a secure fit. The T-One connectors are designed to match the factory connectors, providing a 'factory' appearance.
- Repeat for Both Sides: Connect the T-One harness to both the driver's side and passenger's side taillight wiring.
4.3. ModuLite HD Module Mounting
- Mount Module: Find a secure, dry location within the vehicle's trunk or cargo area to mount the ModuLite HD module. Use the provided mounting screw or cable ties to secure it. Ensure the module is protected from moisture and physical damage.
- గ్రౌండ్ కనెక్షన్: Connect the white wire from the ModuLite module to a clean, unpainted metal surface on the vehicle chassis to establish a proper ground. Use the provided ring terminal and mounting screw.
4.4. పవర్ కనెక్షన్
- Route Power Wire: Route the black power wire from the ModuLite module to the vehicle's battery. Ensure the wire is routed safely, away from moving parts, exhaust, and sharp edges. Use cable ties to secure the wire along its path.
- Install Fuse Holder: Near the battery, cut the power wire and install the provided fuse holder. Insert the fuse into the holder.
- బ్యాటరీకి కనెక్ట్ చేయండి: Connect the power wire from the fuse holder to the positive (+) terminal of the vehicle's battery using a suitable connector (not always included, may require a separate purchase depending on battery terminal type).
4.5. చివరి దశలు
- Secure 4-Way Flat Connector: Route the 4-way flat connector to an accessible location near the rear bumper, where it can be easily connected to a trailer. When not in use, store it in the cargo area or under the rear bumper, using the provided cap to protect the terminals.
- బ్యాటరీని మళ్లీ కనెక్ట్ చేయండి: వాహనం యొక్క బ్యాటరీ యొక్క నెగటివ్ టెర్మినల్ను తిరిగి కనెక్ట్ చేయండి.
- పరీక్షా వ్యవస్థ: Before towing, perform a thorough test of all trailer lighting functions (turn signals, brake lights, running lights) with a connected trailer or a trailer light tester.
5. ఆపరేటింగ్ సూచనలు
Once installed, operating the Tekonsha T-One T-Connector Harness is straightforward:
- ట్రైలర్ను కనెక్ట్ చేయండి: When ready to tow, remove the protective cap from the 4-way flat connector and plug it into the corresponding connector on your trailer.
- లైట్లను ధృవీకరించండి: Always verify that all trailer lights (running lights, brake lights, left turn signal, right turn signal) are functioning correctly before driving.
- Disconnect Trailer: When not towing, disconnect the trailer's wiring harness from the vehicle's 4-way flat connector and replace the protective cap to prevent corrosion and damage.
6. నిర్వహణ
Minimal maintenance is required for the T-One T-Connector Harness:
- కనెక్షన్లను తనిఖీ చేయండి: Periodically check all wiring connections for corrosion, fraying, or damage. Ensure the ground connection remains secure.
- Protect Connector: Always use the protective cap on the 4-way flat connector when not in use to shield it from dirt, moisture, and road debris.
- క్లీన్ టెర్మినల్స్: If terminals appear dirty or corroded, clean them with a wire brush and electrical contact cleaner.
7. ట్రబుల్షూటింగ్
If you experience issues with your trailer lighting, consider the following troubleshooting steps:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| No trailer lights | Blown fuse in fuse holder | ఫ్యూజ్ని తనిఖీ చేసి భర్తీ చేయండి. |
| No trailer lights | వదులుగా లేదా తుప్పుపట్టిన కనెక్షన్లు | Inspect all connections, clean if necessary, and ensure they are secure. |
| Specific trailer light not working | Faulty trailer bulb or wiring | Check the trailer's bulbs and wiring independently. |
| మినుకుమినుకుమనే లైట్లు | పేలవమైన గ్రౌండ్ కనెక్షన్ | Ensure the white ground wire is securely attached to a clean, unpainted metal surface. |
8. స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ సంఖ్య | 118599 |
| కనెక్టర్ రకం | 4-వే ఫ్లాట్ |
| Stop Light/Turn Signal Circuit Capacity | 2.1 Amps |
| Taillight Circuit Capacity | 5.6 Amps |
| వైర్ గేజ్ | 16 Gauge bonded wire |
| మాడ్యూల్ రకం | Upgraded circuit protected ModuLite HD module |
| మెటీరియల్ | రాగి |
| వస్తువు బరువు | 1.5 పౌండ్లు |
| ఉత్పత్తి కొలతలు (L x W x H) | 3.98 x 3.88 x 8.88 అంగుళాలు |
9. వారంటీ మరియు మద్దతు
For warranty information and technical support, please refer to the official Tekonsha website or contact their customer service directly. Details regarding specific warranty periods and coverage are typically provided with the product packaging or on the manufacturer's official resources.





