KICKER 46KISLOC

Kicker 46KISLOC K-Series Interconnect User Manual

Model: 46KISLOC | Brand: KICKER

పరిచయం

The Kicker 46KISLOC K-Series Interconnect is a 2-channel speaker cable to RCA adapter with a line out converter. This device is designed to seamlessly integrate aftermarket amplifiers into vehicles with factory OEM radios that do not have RCA pre-outs. It converts high-level speaker signals into low-level RCA signals, ensuring compatibility and optimal audio performance for your car audio system.

కీ ఫీచర్లు

స్పెసిఫికేషన్లు

గుణంవివరాలు
మోడల్ పేరు46KISLOC
కనెక్టర్ రకంRCA
కేబుల్ రకంRCA
అనుకూల పరికరాలుస్పీకర్
ప్రత్యేక ఫీచర్షార్ట్ సర్క్యూట్ రక్షణ
సిఫార్సు చేసిన ఉపయోగాలుఆడియో ట్రాన్స్మిషన్
కనెక్టర్ లింగంమగ-ఆడ
వాట్tage50 వాట్స్
గరిష్ట వాల్యూమ్tage8 వోల్ట్లు
ఉత్పత్తి కొలతలు4.5 x 2 x 0.5 అంగుళాలు
వస్తువు బరువు1.6 ఔన్సులు

ఇన్‌స్టాలేషన్ గైడ్

The Kicker 46KISLOC is designed for straightforward installation. Follow these steps to integrate it into your car audio system:

  1. పవర్ డిస్‌కనెక్ట్ చేయండి: Before beginning any wiring, ensure your vehicle's battery is disconnected to prevent electrical shorts or damage.
  2. Locate Speaker Wires: Identify the speaker wires from your factory head unit or amplifier that you intend to use as the input for the KISLOC. These are typically found behind the radio or in the vehicle's wiring harness.
  3. Wire the KISLOC Input: Connect the speaker wires from your vehicle to the corresponding input wires on the KISLOC. The KISLOC typically has color-coded wires (e.g., White/White-Black for Left Channel, Grey/Grey-Black for Right Channel). Ensure correct polarity (positive to positive, negative to negative).
    Kicker 46KISLOC with speaker wires

    Image: Kicker 46KISLOC showing speaker wire connections.

  4. Connect RCA Outputs: Plug your aftermarket amplifier's RCA input cables into the RCA output jacks on the KISLOC. The KISLOC provides two RCA outputs (Left and Right).
    Kicker 46KISLOC with RCA outputs

    Image: Kicker 46KISLOC showing RCA output connections.

  5. Ground Connection (Optional): The KISLOC has a brown chassis ground input wire. While not required for most amplifiers, connecting this to a good chassis ground point in the vehicle can help reduce noise in some installations.
  6. Secure the KISLOC: Mount the KISLOC in a secure, dry location away from excessive heat or moisture. Its compact size allows for placement behind the dash, in the trunk, or under a seat.
  7. పవర్‌ని మళ్లీ కనెక్ట్ చేయండి: Once all connections are secure and verified, reconnect your vehicle's battery.

ఇన్‌స్టాలేషన్ వీడియో

వీడియో: ఉత్పత్తి ముగిసిందిview Video by Amazon Product Imaging. This video provides a visual overview of the Kicker KISLOC and its features, demonstrating its compact size and connection points.

ఆపరేషన్

The Kicker 46KISLOC is a passive device that operates automatically once correctly installed. It converts the speaker-level signal from your factory head unit into a low-level RCA signal suitable for your aftermarket amplifier. There are no user-adjustable controls on the KISLOC itself.

After installation, you will primarily control your audio system through your head unit and the gain/crossover settings on your aftermarket ampప్రాణాలను బలిగొంటాడు. నిర్ధారించండి amplifier gains are set appropriately to match the output of the KISLOC and prevent distortion.

నిర్వహణ

The Kicker 46KISLOC requires minimal maintenance. To ensure longevity and optimal performance:

ట్రబుల్షూటింగ్

If you experience issues with your Kicker 46KISLOC, consider the following common troubleshooting steps:

సమస్యసాధ్యమైన కారణంపరిష్కారం
ఆడియో అవుట్‌పుట్ లేదుసరికాని వైరింగ్, వదులుగా ఉన్న కనెక్షన్లు, amplifier not powered on, incorrect source selection on head unit.Verify all speaker wire connections to the KISLOC are secure and correct polarity. Check RCA connections to the ampలైఫైయర్. నిర్ధారించు amplifier is receiving power and remote turn-on signal. Confirm correct audio source is selected on your head unit.
వక్రీకరించిన ధ్వనిAmplifier gain set too high, poor input signal, damaged speaker wires.తగ్గించండి amplifier gain settings. Ensure speaker wires from the head unit are not damaged or shorting. Check for proper signal from the head unit.
ఇంజిన్ శబ్దం/అరుపుGround loop, poor grounding of KISLOC or amplifier, RCA cables routed too close to power wires.Ensure the KISLOC's brown ground wire (if used) and amplifier's ground wire are connected to a clean, solid chassis ground point. Reroute RCA cables away from power cables. Consider a ground loop isolator if the problem persists.
Weak Audio OutputLow input signal from head unit, ampలిఫైయర్ లాభం చాలా తక్కువగా సెట్ చేయబడింది.పెంచండి amplifier gain settings gradually. Ensure head unit volume is at a reasonable level.

వారంటీ మరియు మద్దతు

For specific warranty information and technical support regarding your Kicker 46KISLOC, please refer to the documentation included with your product or visit the official KICKER website. KICKER provides comprehensive support for their products to ensure customer satisfaction.

You can also find additional resources and FAQs on the KICKER support page or by contacting their customer service directly.

సంబంధిత పత్రాలు - 46KISLOC

ముందుగాview KICKER KEYLOC Customer Information Card & Setup Guide
Learn how to install and set up your KICKER KEYLOC, a DSP-powered Line Out Converter designed to optimize your vehicle's audio signal for KICKER amplifiers and processors. Includes wiring diagrams and detailed operation instructions.
ముందుగాview Kicker KEYLOC Owner's Manual: DSP-Powered Line Output Converter
Comprehensive owner's manual for the Kicker KEYLOC, a 2-channel DSP-powered line output converter. Learn about installation, wiring, setup, features, and troubleshooting for optimizing your car audio system.
ముందుగాview కిక్కర్ KXMA1500.1 మోనో Ampలైఫైయర్ యజమాని యొక్క మాన్యువల్
KICKER KXMA1500.1 మోనో కోసం సమగ్ర యజమాని మాన్యువల్ ampలైఫైయర్, పనితీరు స్పెసిఫికేషన్‌లు, ఇన్‌స్టాలేషన్ గైడ్‌లు, ఆపరేషన్ సూచనలు, గెయిన్ మ్యాచింగ్, ట్రబుల్షూటింగ్ మరియు వారంటీ సమాచారాన్ని వివరించడం.
ముందుగాview KICKER KMC4 మీడియా సెంటర్ యజమాని మాన్యువల్
ఈ పత్రం KICKER KMC4 (46KMC4) మీడియా సెంటర్ కోసం సమగ్ర సంస్థాపన, ఆపరేషన్ మరియు ట్రబుల్షూటింగ్ సమాచారాన్ని అందిస్తుంది, స్పెసిఫికేషన్లు, లక్షణాలు, కనెక్టివిటీ ఎంపికలు మరియు వినియోగదారు నియంత్రణలను వివరిస్తుంది.
ముందుగాview KICKER KEYLOC DSP-పవర్డ్ లైన్ అవుట్‌పుట్ కన్వర్టర్ ఓనర్స్ మాన్యువల్
This manual provides instructions for the KICKER KEYLOC, a DSP-powered line output converter designed to integrate aftermarket amplifiers with OEM audio systems. It covers installation, wiring, setup, and troubleshooting.
ముందుగాview KICKER WXA3600.1 వార్‌హార్స్ మోనో Ampలైఫైయర్ యజమాని యొక్క మాన్యువల్
KICKER WXA3600.1 వార్‌హోర్స్ మోనో కోసం యజమాని మాన్యువల్ ampకార్ ఆడియో సిస్టమ్‌ల కోసం లైఫైయర్, డిటైలింగ్ ఫీచర్‌లు, ఇన్‌స్టాలేషన్, వైరింగ్, ఆపరేషన్, ట్రబుల్షూటింగ్ మరియు వారంటీ సమాచారం.