1. ఉత్పత్తి ముగిసిందిview
The SUZUKI 09168-12002 Oil Gall Gasket is a genuine Original Equipment Manufacturer (OEM) part designed to provide a reliable seal in specific Suzuki applications. This gasket is crucial for preventing oil leaks and maintaining the integrity of your vehicle's lubrication system.
చిత్రం 1.1: పైభాగం view of the SUZUKI 09168-12002 Oil Gall Gasket. This image shows the circular shape and metallic finish of the gasket.
చిత్రం 1.2: కోణీయ view of the SUZUKI 09168-12002 Oil Gall Gasket. This perspective highlights the slight conical or crush washer design of the gasket.
2. సెటప్ మరియు ఇన్స్టాలేషన్
Proper installation of the gasket is essential for its function. Always refer to your vehicle's specific service manual for detailed instructions and torque specifications.
2.1 Application Specifics
- This gasket (P/N: 09168-12002) is typically used for the front bolt on the motorcycle oil pan in compatible Suzuki models.
- ముఖ్యమైన గమనిక: కోసం engine oil drain plug, a different part number (P/N: 09168-14002) is often required, usually in quantities of two. Verify the correct part number for your specific application before installation.
- This gasket is అనుకూలంగా లేదు with all Suzuki models, such as the V-Strom 800 DE, despite some descriptions. Always confirm fitment with your vehicle's service manual or a Suzuki authorized dealer.
2.2 సాధారణ సంస్థాపనా దశలు
- ప్రాంతాన్ని సిద్ధం చేయండి: Ensure the engine is cool. Place a drain pan beneath the oil pan or component where the gasket will be replaced.
- డ్రెయిన్ ఫ్లూయిడ్: If replacing a drain plug gasket, drain the engine oil or relevant fluid completely.
- పాత రబ్బరు పట్టీని తొలగించండి: Carefully remove the bolt or component. Remove the old gasket, ensuring no residue remains on the mating surfaces. Clean both surfaces thoroughly to ensure a proper seal.
- కొత్త గాస్కెట్ స్థానం: Place the new SUZUKI 09168-12002 gasket onto the bolt or component. Ensure it is seated correctly and not twisted or pinched.
- Reinstall Component: Reinstall the bolt or component, tightening it to the manufacturer's specified torque. Overtightening can damage the gasket or threads, while undertightening can lead to leaks.
- Refill Fluid: If fluid was drained, refill with the correct type and amount of fluid as specified by your vehicle's manufacturer.
- లీక్ల కోసం తనిఖీ చేయండి: Start the engine and allow it to reach operating temperature. Carefully inspect the newly installed gasket area for any signs of leaks.
3. Operating and Function
Once correctly installed, the SUZUKI 09168-12002 Oil Gall Gasket functions as a crush washer, creating a tight, leak-proof seal between two mating surfaces, typically a bolt head and an oil pan or other fluid-containing component. Its design allows it to deform slightly under compression, filling microscopic imperfections and preventing fluid escape under pressure and temperature variations.
4. నిర్వహణ
Gaskets like the 09168-12002 are generally considered single-use components. They are designed to be crushed once to form a seal. Reusing a crushed gasket significantly increases the risk of leaks.
- భర్తీ షెడ్యూల్: It is recommended to replace this gasket every time the associated bolt or component is removed, such as during oil changes or other maintenance procedures that require access to the sealed area.
- తనిఖీ: Periodically inspect the area around the gasket for any signs of oil seepage or leaks. Early detection can prevent more significant issues.
5. ట్రబుల్షూటింగ్
If you experience oil leaks after installing the gasket, consider the following troubleshooting steps:
- Incorrect Part Number: Verify that you have used the correct gasket (P/N: 09168-12002) for the specific application. As noted, this gasket is for the oil pan front bolt, not typically the engine oil drain plug.
- సరికాని సంస్థాపన: Ensure the gasket was installed correctly, without being pinched or misaligned. The mating surfaces must be clean and free of debris or old gasket material.
- తప్పు టార్క్: Confirm that the bolt was tightened to the manufacturer's specified torque. Both undertightening and overtightening can compromise the seal.
- దెబ్బతిన్న రబ్బరు పట్టీ: Inspect the gasket for any visible damage before installation. Even new gaskets can sometimes have manufacturing defects.
- భాగం నష్టం: Check the bolt, oil pan, or other mating surfaces for cracks, stripped threads, or other damage that could prevent a proper seal.
- వాహన అనుకూలత: Reconfirm that this specific gasket is compatible with your vehicle model. Some Suzuki models, like the V-Strom 800 DE, may require different gaskets.
6. స్పెసిఫికేషన్లు
| తయారీదారు | సుజుకి |
| బ్రాండ్ | సుజుకి |
| తయారీదారు పార్ట్ నంబర్ | 09168-12002 |
| వస్తువు బరువు | 0.48 ఔన్సులు |
| ప్యాకేజీ కొలతలు | 0.78 x 0.78 x 0.78 అంగుళాలు |
| ASIN | B00I9FRPRY |
| మొదటి తేదీ అందుబాటులో ఉంది | ఫిబ్రవరి 5, 2014 |
7. వారంటీ సమాచారం
As a genuine SUZUKI OEM part, this gasket is typically covered by SUZUKI's standard warranty for replacement parts. Warranty terms and conditions may vary by region and purchase location. Please retain your proof of purchase. For specific warranty details, consult your authorized SUZUKI dealer or the official SUZUKI webసైట్.
8. మద్దతు మరియు సంప్రదింపులు
For technical assistance, installation guidance, or to verify part compatibility for your specific Suzuki model, please contact your local authorized SUZUKI dealer or service center. You can find contact information and dealer locations on the official SUZUKI webసైట్.
Always ensure that any work performed on your vehicle is done by qualified personnel or with strict adherence to the manufacturer's service manual.
