1. ఉత్పత్తి ముగిసిందిview
The Lincoln Electric SHIELDARC 70 Plus EO electrodes are designed for shielded metal arc welding (SMAW) of carbon steel. These 5/32 inch diameter, 14 inch long electrodes are supplied in a 50 lb. sealed can, ensuring optimal condition for use. They are suitable for various welding applications requiring good mechanical properties and ease of use.
Figure 1: A sealed 50 lb. can of Lincoln Electric SHIELDARC 70 Plus EO stick welding electrodes, indicating proper packaging for storage and protection.
2. భద్రతా సమాచారం
Welding operations present various hazards. It is imperative to follow all safety precautions to prevent injury or property damage. Always refer to ANSI Z49.1 "Safety in Welding, Cutting, and Allied Processes" and your employer's safety practices.
- పొగలు మరియు వాయువులు: Keep your head out of the fumes. Use enough ventilation, exhaust at the arc, or both, to keep fumes and gases from your breathing zone and the general area.
- విద్యుదాఘాతం: Can kill. Do not touch live electrical parts. Wear dry insulating gloves and clothing. Insulate yourself from work and ground.
- ఆర్క్ కిరణాలు: Can burn eyes and skin. Wear a welding helmet with a proper shade of filter lens to protect your eyes and face. Wear appropriate protective clothing to protect your skin.
- అగ్ని మరియు పేలుడు: Welding sparks and hot materials can cause fire or explosion. Keep flammables away from the welding area. Have a fire extinguisher readily available.
- వేడి భాగాలు: Can cause severe burns. Allow welded materials to cool before handling.
3. నిల్వ మరియు నిర్వహణ
Proper storage is crucial to maintain the quality and performance of welding electrodes. These electrodes are supplied in a sealed can to protect them from moisture absorption.
- Store electrodes in their original sealed container in a dry environment.
- Once opened, store electrodes in a heated cabinet or oven at recommended temperatures (typically 250-300°F / 120-150°C) to prevent moisture pickup, especially in humid conditions.
- Avoid exposing electrodes to extreme temperature fluctuations or direct sunlight.
- Handle cans carefully to prevent damage that could compromise the seal.
4. సెటప్ మరియు తయారీ
Before beginning any welding operation, ensure proper setup of your equipment and workspace.
- కార్యస్థలం తయారీ: Clear the welding area of any flammable materials. Ensure adequate ventilation.
- వ్యక్తిగత రక్షణ పరికరాలు (PPE): Don appropriate PPE, including a welding helmet, flame-resistant clothing, welding gloves, and safety shoes.
- వెల్డింగ్ మెషిన్: Connect the welding machine according to the manufacturer's instructions. Ensure proper grounding.
- ఎలక్ట్రోడ్ ఎంపిక: Select the appropriate electrode holder and ensure a secure connection.
- Base Material Preparation: Clean the base metal thoroughly, removing rust, paint, oil, and other contaminants that could affect weld quality.
5. ఆపరేటింగ్ సూచనలు
Follow these general guidelines for effective welding with SHIELDARC 70 Plus EO electrodes:
- ప్రస్తుత సెట్టింగ్: Refer to the electrode manufacturer's recommendations for amperage settings. Start with the lower end of the range and adjust as needed.
- ఆర్క్ పొడవు: Maintain a short arc length, typically equal to the electrode's core wire diameter, for optimal penetration and bead shape.
- ప్రయాణ వేగం: Maintain a consistent travel speed to ensure proper bead width and penetration. Too fast can lead to narrow, convex beads; too slow can cause excessive buildup and overheating.
- ఎలక్ట్రోడ్ కోణం: Hold the electrode at a slight angle (10-15 degrees) in the direction of travel for most applications.
- ఆర్క్ను కొట్టడం: Use a scratching or tapping motion to strike the arc. Once the arc is established, lift the electrode slightly to maintain the desired arc length.
- స్లాగ్ తొలగింపు: After each pass, allow the weld to cool slightly, then chip away the slag. Ensure all slag is removed before making subsequent passes.
6. Electrode Maintenance
The primary maintenance for these electrodes involves preventing moisture absorption. Once the can is opened, electrodes should be stored in a heated electrode oven to maintain their low hydrogen properties. Electrodes exposed to atmospheric moisture for extended periods may require re-baking according to manufacturer specifications to restore their performance characteristics.
7. సాధారణ సమస్యలను పరిష్కరించడం
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| సచ్ఛిద్రత (small holes in weld) | Moisture in electrode coating, contaminated base metal, insufficient shielding gas (if applicable), incorrect arc length. | Re-bake electrodes, clean base metal, ensure proper arc length. |
| Lack of Fusion | సరిపోదు amperage, too fast travel speed, incorrect electrode angle. | పెంచండి amperage, decrease travel speed, adjust electrode angle. |
| మితిమీరిన చిందులు | చాలా ఎక్కువ amperage, too long arc length, incorrect polarity. | తగ్గించు amperage, shorten arc length, check polarity settings. |
| Arc Instability | Moisture in electrode, poor ground connection, incorrect current. | Re-bake electrodes, check ground clamp, adjust current. |
8. ఉత్పత్తి లక్షణాలు
- మోడల్ సంఖ్య: ED012849
- ఎలక్ట్రోడ్ రకం: SHIELDARC 70 Plus EO
- వ్యాసం: 5/32 అంగుళాలు
- పొడవు: 14 అంగుళాలు
- బరువు: 50 lb. can
- తయారీదారు: లింకన్ ఎలక్ట్రిక్
- ASIN: B00IPUB4SY
- మొదటి తేదీ అందుబాటులో ఉంది: జూన్ 14, 2012
9. వారంటీ సమాచారం
For specific warranty details regarding Lincoln Electric SHIELDARC 70 Plus EO electrodes, please refer to the official Lincoln Electric website or contact their customer support. Generally, welding consumables are warranted against defects in material and workmanship at the time of shipment.
10. కస్టమర్ మద్దతు
For technical assistance, product inquiries, or support, please contact Lincoln Electric directly:
- Webసైట్: www.lincolnelectric.com
- సంప్రదింపు సమాచారం: Refer to the "Contact Us" section on their official website for phone numbers and email addresses specific to your region.
11. చట్టపరమైన నిరాకరణ
ఆహార పదార్ధాలకు సంబంధించిన ప్రకటనలు FDAచే మూల్యాంకనం చేయబడలేదు మరియు ఏదైనా వ్యాధి లేదా ఆరోగ్య పరిస్థితిని నిర్ధారించడానికి, చికిత్స చేయడానికి, నయం చేయడానికి లేదా నిరోధించడానికి ఉద్దేశించబడలేదు.
Note: This disclaimer appears to be a generic placeholder from the source data and may not be directly relevant to welding electrodes. Users should always consult product-specific safety data sheets (SDS) and manufacturer guidelines for accurate and relevant safety information.
