TOA Electronics BS-1030W Music/Paging Speaker User Manual

1. పరిచయం

This manual provides essential instructions for the safe and efficient use of your TOA Electronics BS-1030W Music/Paging Speaker. Please read this manual thoroughly before installation and operation, and retain it for future reference.

చిత్రం 1.1: ముందు view of the TOA BS-1030W Music/Paging Speaker in white. The speaker features a white ABS resin enclosure and a steel mesh grille, with the TOA logo visible at the bottom center.

2. భద్రతా జాగ్రత్తలు

Always observe the following safety precautions to prevent personal injury and property damage.

• సంస్థాపన: Ensure the speaker is securely mounted to a structure capable of supporting its weight. Incorrect installation may cause the speaker to fall, resulting in injury.
• శక్తి: స్పీకర్‌ని ఒక దానికి కనెక్ట్ చేయండి amplifier with appropriate power output and impedance. Overloading can damage the speaker.
• పర్యావరణం: While the speaker has splash-proof construction (IPX3), avoid direct exposure to heavy rain or prolonged submersion. Do not install in locations with extreme temperatures or high humidity beyond specified operating conditions.
• సర్వీసింగ్: Do not attempt to open or modify the speaker. Refer all servicing to qualified personnel.

3 కీ ఫీచర్లు

• 2-Way Bass-Reflex Design: Features a 4.72" (12 cm) cone woofer and a 1" (dome-type) tweeter for a wide frequency response (80 Hz - 20 kHz).
• Versatile Impedance Options: Selectable between low impedance (8 Ohms) and high impedance (100V/70V line) via a rotary switch.
• స్ప్లాష్ ప్రూఫ్ నిర్మాణం: IPX3 compliant, allowing installation under eaves where direct rain exposure is limited.
• మన్నికైన ఎన్‌క్లోజర్: Constructed with ABS resin and a steel mesh grille, both in white (RAL9010 PURE WHITE).
• రేట్ చేయబడిన ఇన్‌పుట్: 30 W.
• ధ్వని ఒత్తిడి స్థాయి: 90 dB (1 W, 1 m).

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

4.1 ప్యాకేజీ విషయాలు

దయచేసి ఇన్‌స్టాలేషన్‌తో కొనసాగే ముందు అన్ని భాగాలు ఉన్నాయని ధృవీకరించండి:

• TOA BS-1030W Speaker Unit
• మౌంటు బ్రాకెట్
• సూచనల మాన్యువల్ (ఈ పత్రం)
• (Additional mounting hardware may be required depending on installation surface, not included)

4.2 మౌంటు పరిగణనలు

The BS-1030W speaker is designed for wall mount or floor standing applications. The included bracket facilitates secure wall mounting.

• Choose a mounting location that can structurally support the speaker's weight (approximately 5.5 pounds).
• For outdoor use, install the speaker under eaves or in a sheltered area to protect it from direct heavy rain, leveraging its IPX3 splash-proof rating.
• Ensure adequate space around the speaker for proper sound dispersion and heat dissipation.

4.3 Impedance Selection and Wiring

The speaker features a rotary switch on the rear for selecting between low impedance (8 Ohms) and various high impedance (100V/70V line) tap settings. నిర్ధారించండి amplifier is turned OFF before making any impedance selections or wiring connections.

1. Select Impedance: Rotate the switch to the desired setting (e.g., 8Ω for low impedance, or a specific wattage tap for 100V/70V line systems). Refer to your amplifier's specifications for compatible impedance and power requirements.
2. స్పీకర్ వైర్లను కనెక్ట్ చేయండి: The speaker is equipped with a 2-core cabtyre cord. Connect these wires to the appropriate speaker output terminals on your amplifier. Observe correct polarity (+ to +, - to -).
3. సురక్షిత కనెక్షన్లు: Ensure all wire connections are tight and secure to prevent intermittent sound or short circuits.

5. ఆపరేషన్

Once the speaker is securely installed and wired, you can begin operation.

1. పవర్ ఆన్: మీ ఆన్ చేయండి ampలైఫైయర్ మరియు కనెక్ట్ చేయబడిన ఏవైనా ఆడియో మూలాలు.
2. వాల్యూమ్ సర్దుబాటు: తో ప్రారంభించండి amplifier volume at its lowest setting and gradually increase it to a comfortable listening level. Avoid excessively high volumes that may cause distortion or damage to the speaker.
3. ఆడియో మూలం: Play audio from your connected device (e.g., music player, microphone for paging).

6. నిర్వహణ

Regular maintenance helps ensure the longevity and optimal performance of your speaker.

• శుభ్రపరచడం: Wipe the speaker enclosure and grille with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild detergent, then wipe dry. Do not use abrasive cleaners, solvents, or strong chemicals.
• తనిఖీ: Periodically check mounting hardware for tightness and signs of wear. Inspect speaker wires for any damage.
• పర్యావరణ పరిరక్షణ: Ensure the speaker remains protected from direct, heavy weather conditions to maintain its splash-proof integrity.

7. ట్రబుల్షూటింగ్

మీ స్పీకర్‌తో మీకు సమస్యలు ఎదురైతే, ఈ క్రింది సాధారణ సమస్యలు మరియు పరిష్కారాలను చూడండి:

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

TOA products are manufactured to high quality standards. This product comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official TOA webసైట్.

For technical support, service, or replacement parts, please contact your authorized TOA dealer or distributor. Do not attempt to repair the unit yourself, as this may void your warranty.