Olympus IS 10 Film Camera Instruction Manual

పరిచయం

This manual provides essential instructions for the safe and effective use of your Olympus IS 10 Film Camera. Please read this manual thoroughly before using the camera and keep it in a safe place for future reference. The Olympus IS 10 is a 35mm point-and-shoot film camera featuring a 28-110mm Glass Aspherical AF Zoom Lens and Intelligent Flash.

సెటప్

1. బ్యాటరీ ఇన్‌స్టాలేషన్

The Olympus IS 10 requires batteries for operation. Locate the battery compartment cover, typically on the bottom or side of the camera. Open the cover and insert the required batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Close the cover securely.

2. ఫిల్మ్ లోడింగ్

1. Open the camera back cover by sliding the latch, usually located on the side of the camera body.
2. Place a 35mm film cartridge into the film chamber.
3. Pull the film leader across to the film take-up spool, aligning it with the orange mark or insertion point.
4. Close the camera back cover firmly until it clicks shut. The camera will automatically advance the film to the first frame. The frame counter will display '1'.

3. స్ట్రాప్ అటాచ్మెంట్

Attach the camera strap to the strap lugs located on the camera body. Ensure the strap is securely fastened to prevent accidental drops.

ఆపరేషన్

1. పవర్ ఆన్/ఆఫ్

To power on the camera, slide the ON/OFF switch, typically located near the top left of the camera body. To power off, slide the switch back to the OFF position.

Image: Front-top view of the Olympus IS 10 camera, showing the lens, power switch, and some control buttons. The lens is extended, indicating the camera is powered on or ready for use.

2. Focusing and Zooming

The Olympus IS 10 features a 28-110mm autofocus zoom lens. Use the zoom lever, usually located near the shutter button, to adjust the focal length. The camera will automatically focus on your subject when the shutter button is half-pressed.

3. షూటింగ్ మోడ్‌లు

The camera offers various shooting modes, including a 'FULL AUTO' mode for simplified operation. Select your desired mode using the mode dial or buttons, typically located on the top right of the camera. Refer to the display for the selected mode.

Image: Rear-top view of the Olympus IS 10 camera, highlighting the control panel with buttons for flash, full auto mode, zoom, and the Quartzdate settings. The LCD display is also visible.

4. ఫ్లాష్ ఆపరేషన్

The camera is equipped with an Intelligent Flash. Press the flash button to cycle through different flash modes (e.g., Auto Flash, Red-eye Reduction, Flash Off, Fill-in Flash). The selected mode will be indicated on the camera's display.

5. షట్టర్ విడుదల

To take a picture, compose your shot and gently press the shutter button located on the top of the camera. Pressing halfway will activate autofocus and exposure metering. Pressing fully will release the shutter and capture the image.

6. Quartzdate Function

The Quartzdate function allows you to imprint the date or time onto your photographs. Use the 'MODE' and 'SET' buttons, typically found on the rear of the camera, to adjust the date/time settings and activate/deactivate the imprint function.

చిత్రం: పైన view of the Olympus IS 10 camera, clearly showing the 'QUARTZDATE' display and its 'MODE' and 'SET' buttons for date imprinting functionality.

7. Film Rewinding and Unloading

Once all frames on the film roll have been exposed, the camera will automatically rewind the film back into its cartridge. Wait for the rewinding process to complete (indicated by a sound or display message), then open the camera back cover and remove the film cartridge.

నిర్వహణ

1. కెమెరాను శుభ్రపరచడం

• కెమెరా బాడీ: కెమెరా బాడీని తుడవడానికి మృదువైన, పొడి వస్త్రాన్ని ఉపయోగించండి. మొండి ధూళి కోసం, కొద్దిగా dampగుడ్డను నీటితో తడిపి, ఆరబెట్టండి. సేంద్రీయ ద్రావకాలను వాడకుండా ఉండండి.
• లెన్స్: దుమ్ము తొలగించడానికి లెన్స్ బ్రష్ లేదా బ్లోవర్ ఉపయోగించండి. మరకల కోసం, ప్రత్యేకమైన లెన్స్ క్లీనింగ్ క్లాత్ మరియు లెన్స్ క్లీనింగ్ ఫ్లూయిడ్ ఉపయోగించండి. మీ వేళ్లతో లెన్స్ ఉపరితలాన్ని తాకవద్దు.
• Film Chamber: Keep the film chamber clean and free of dust or debris, which can scratch film. Use a blower brush if necessary.

2. బ్యాటరీ సంరక్షణ

Remove batteries if the camera will not be used for an extended period to prevent leakage. Store batteries in a cool, dry place. Dispose of used batteries responsibly according to local regulations.

3. నిల్వ

Store the camera in a cool, dry, and well-ventilated place, away from direct sunlight, high temperatures, high humidity, and strong magnetic fields. Use a desiccant if storing in humid environments.

ట్రబుల్షూటింగ్

• కెమెరా పవర్ ఆన్ చేయదు: బ్యాటరీలు సరిగ్గా చొప్పించబడ్డాయో లేదో మరియు అవి ఖాళీగా లేవో తనిఖీ చేయండి. అవసరమైతే కొత్త బ్యాటరీలతో భర్తీ చేయండి.
• ఫ్లాష్ వెలగదు: Ensure the flash mode is not set to 'Flash Off'. Check battery level. In some low-light conditions, the flash may not fire if the camera determines sufficient ambient light.
• Pictures are out of focus: Ensure the subject is within the camera's focusing range. Half-press the shutter button to allow the camera to focus before fully pressing. Avoid shooting through dirty or smudged lenses.
• Film does not advance/rewind: Check if the film is loaded correctly. Ensure the camera back is securely closed. If the issue persists, the film may be jammed or the camera may require servicing.
• ప్రదర్శనలో దోష సందేశం: Consult the camera's display for specific error codes or messages. If the message is not clear, try turning the camera off and on again.

If you encounter persistent issues not covered here, please refer to the support section.

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Olympus provides customer support for their products. For technical assistance, service, or further inquiries, please visit the official Olympus webసైట్‌లో లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.

Note: This manual is for informational purposes. Product features and specifications are subject to change without notice.