పరిచయం
This manual provides essential information for the safe and effective use, maintenance, and care of your SCUBAPRO MK2 EVO First Stage Regulator. Please read this manual thoroughly before using the equipment. Proper understanding and adherence to these instructions are crucial for your safety and the longevity of your regulator.
భద్రతా సమాచారం
Diving with compressed gas equipment carries inherent risks. It is imperative that only certified divers use this equipment. Always perform pre-dive safety checks and ensure all components are correctly assembled and functioning. Regular professional servicing is mandatory to maintain the regulator's performance and safety.
- Never attempt repairs or modifications beyond the scope of this manual. Refer all servicing to an authorized SCUBAPRO technician.
- Always ensure the regulator is free of water before connecting it to a cylinder valve.
- Avoid exposing the regulator to extreme temperatures or direct sunlight for prolonged periods.
- Rinse the regulator thoroughly with fresh water after each dive, ensuring the dust cap is securely in place.
ఉత్పత్తి ముగిసిందిview
The SCUBAPRO MK2 EVO is a classic downstream piston first stage regulator known for its robust design and reliable performance. It features a marine-grade chromed brass body and components, designed for durability in various water temperatures.
Image: The ScubaPro MK2 EVO First Stage Regulator, a chrome-plated device with multiple ports and a black protective cap, designed for connecting to a scuba cylinder and distributing air to secondary regulators and gauges.
ముఖ్య లక్షణాలు:
- Flow-By Piston Design: Provides consistent air delivery.
- Marine Grade Chromed Brass Body: మన్నిక మరియు తుప్పు నిరోధకతను నిర్ధారిస్తుంది.
- కాంపాక్ట్ మరియు తేలికపాటి: Designed for ease of use and transport.
- బరువు: Approximately 1.3 Pounds (706g).
సెటప్
Follow these steps to correctly set up your MK2 EVO First Stagఇ రెగ్యులేటర్:
- Inspect the Regulator: Before each use, visually inspect the first stage for any signs of damage, corrosion, or wear. Ensure the dust cap is clean and the O-ring on the cylinder connection is intact.
- Connect to Cylinder Valve: మొదటి సె నుండి డస్ట్ క్యాప్ తొలగించండిtage. Ensure the cylinder valve is clean and free of debris. Align the first stage with the cylinder valve and screw it on hand-tight. Do not overtighten.
- గొట్టాలను అటాచ్ చేయండి: Connect your low-pressure (LP) hoses (e.g., to second stage, BCD inflator) and high-pressure (HP) hose (to pressure gauge/console) to the appropriate ports. Ensure all connections are secure. The MK2 EVO typically features one HP port and multiple LP ports.
- Open Cylinder Valve: Slowly open the cylinder valve. Listen for any leaks. The pressure gauge should indicate the cylinder pressure.
- లీక్ల కోసం తనిఖీ చేయండి: Submerge the assembled regulator in a rinse tank or listen carefully for any hissing sounds indicating air leaks from connections.
ఆపరేటింగ్
Proper operation of your regulator ensures a safe and enjoyable dive.
Pre-Dive Checks:
- Confirm cylinder pressure is adequate for the planned dive.
- Breathe from the second stage to ensure smooth air delivery.
- Check the BCD inflator for proper function.
During the Dive:
- Monitor your air supply regularly using your pressure gauge.
- Avoid rapid changes in depth that could stress the regulator.
Post-Dive Procedures:
- సిలిండర్ వాల్వ్ను మూసివేయండి.
- Purge the second stage to release residual pressure from the system.
- Disconnect the first stage from the cylinder valve.
- Immediately replace the dust cap on the first stage to prevent water and contaminants from entering.
నిర్వహణ
Regular maintenance is vital for the performance and longevity of your regulator.
ప్రక్షాళన:
- After each dive, with the dust cap securely in place, rinse the entire first stage thoroughly with fresh, clean water.
- Do not press the purge button on the second stage while rinsing the first stage unless it is pressurized, as this can allow water to enter the first stage.
- Allow the regulator to air dry completely in a shaded, well-ventilated area before storage.
నిల్వ:
- Store the regulator in a cool, dry place, away from direct sunlight, chemicals, and extreme temperatures.
- Avoid kinking hoses during storage.
ప్రొఫెషనల్ సర్వీసింగ్:
Your SCUBAPRO MK2 EVO First Stage Regulator requires periodic professional servicing by an authorized SCUBAPRO technician. Adhere to the manufacturer's recommended service intervals, typically annually or every 100 dives, whichever comes first. This ensures optimal performance and safety.
ట్రబుల్షూటింగ్
This section addresses common issues you might encounter. For problems not listed here, or if solutions do not resolve the issue, contact an authorized SCUBAPRO service center.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Air leak from connections | Loose connection, damaged O-ring, debris | Tighten connections, inspect and replace O-rings if damaged, clean debris. |
| Regulator free-flows | Contamination, internal component issue, cold water | Rinse thoroughly. If persistent, seek professional service. In cold water, avoid rapid purges. |
| శ్వాస తీసుకోవడంలో ఇబ్బంది | Low cylinder pressure, internal issue | Check cylinder pressure. If adequate, seek professional service immediately. |
స్పెసిఫికేషన్లు
- మోడల్: MK2 EVO
- పార్ట్ నంబర్: 10.063.000
- డిజైన్: Downstream Piston First Stage
- శరీర పదార్థం: Marine Grade Chromed Brass
- బరువు: Approximately 1.3 Pounds (706g)
- అంశం కొలతలు (LxWxH): 1 x 1 x 1 inches (Note: This is a placeholder, actual dimensions may vary)
- ప్యాకేజీ కొలతలు (LxWxH): 6.1 x 5.1 x 2.9 అంగుళాలు
- అంశాల సంఖ్య: 1
వారంటీ సమాచారం
The SCUBAPRO MK2 EVO First Stage Regulator is covered by a manufacturer's warranty. For specific details regarding warranty terms, conditions, and duration, please refer to the documentation provided with your purchase or visit the official SCUBAPRO webవారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
మద్దతు
For technical assistance, spare parts, or professional servicing, please contact an authorized SCUBAPRO dealer or service center. You can find contact information and a dealer locator on the official SCUBAPRO webసైట్.
SCUBAPRO Official Webసైట్: www.scubapro.com
