Broan-NuTone SPK110 Bluetooth Speaker Ventilation Fan

1. పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your Broan-NuTone SPK110 Bluetooth Speaker Ventilation Fan. This ENERGY STAR certified exhaust fan is designed to effectively clear odors and moisture from rooms up to 105 sq. ft., while also providing high-fidelity audio through its integrated Bluetooth speakers.

The SPK110 operates at 110 CFM (Cubic Feet per Minute) and a quiet 1.0 Sones, ensuring efficient air movement with minimal noise. Its dual high-fidelity Sensonic speakers are discreetly concealed behind the fan grille, allowing you to stream audio from most Bluetooth-enabled devices without cluttering your space.

Image 1.1: The Broan-NuTone SPK110 Bluetooth Speaker Ventilation Fan, showcasing its sleek design and integrated grille.

2. భద్రతా సమాచారం

Please read and understand all instructions before beginning installation or operation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• ఫ్యాన్‌పై పని చేసే ముందు సర్వీస్ ప్యానెల్ వద్ద ఎల్లప్పుడూ పవర్‌ను డిస్‌కనెక్ట్ చేయండి.
• Ensure all wiring is done in accordance with local electrical codes and standards.
• This fan is UL listed for use over a bathtub or shower when installed with a GFCI (Ground Fault Circuit Interrupter) protected branch circuit.
• Type IC for use in direct contact with thermal insulation.
• Do not use this fan with any solid-state speed control device unless specifically approved by Broan-NuTone.
• Never place any object into the fan grille.

3. ప్యాకేజీ విషయాలు

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి:

• వెంటిలేషన్ ఫ్యాన్ హౌసింగ్
• Grille Assembly with Integrated Bluetooth Speakers
• స్పీకర్ అసెంబ్లీ
• నాన్-మెటాలిక్ డిamper/Duct Connector (4-inch round)
• Unique Spacer for Easy I-joist Mounting
• Installation Guide and Hardware

4. స్పెసిఫికేషన్లు

5. సంస్థాపన

The Broan-NuTone SPK110 is designed for easy installation in new construction or as a replacement unit. It fits 2"x 8" ceiling construction and includes a unique spacer for easy I-joist mounting.

5.1 ప్రీ-ఇన్‌స్టాలేషన్ దశలు

1. పవర్ ఆఫ్ చేయండి: Before starting any work, ensure the power to the installation area is completely disconnected at the circuit breaker or fuse box.
2. Review స్థానిక కోడ్‌లు: Consult local electrical and building codes to ensure compliance.
3. ప్రారంభాన్ని సిద్ధం చేయండి: If replacing an existing fan, remove the old unit. The SPK110 requires a housing dimension of 10.5" x 11.375" x 10.5". Adjust the ceiling opening as necessary.
4. నాళిక పని: Ensure you have 4-inch round ductwork available. If your existing ductwork is a different size (e.g., 3-inch), you will need an appropriate reducer/adapter (sold separately).

5.2 Mounting the Fan Housing

1. Position the fan housing between ceiling joists. The unique spacer facilitates mounting to I-joists.
2. Secure the housing to the joists using appropriate fasteners.
3. Connect the 4-inch round ductwork to the non-metallic damper/duct connector on the fan housing. Ensure a secure and airtight connection.

5.3 ఎలక్ట్రికల్ వైరింగ్

1. Route the electrical supply wires into the fan's wiring compartment.
2. Connect the wires according to the wiring diagram provided in the full installation guide. Typically, this involves connecting the black wire to the fan switch, the white wire to neutral, and the green/bare wire to ground.
3. అన్ని కనెక్షన్‌లు సురక్షితంగా మరియు ఇన్సులేట్‌గా ఉన్నాయని నిర్ధారించుకోండి.

5.4 Installing the Grille

1. Plug the speaker assembly cable into the designated port inside the fan housing.
2. Align the grille assembly with the fan housing and push it firmly into place until the torsion springs secure it.

Image 5.1: The Broan-NuTone SPK110 fan housing with its duct connector, illustrating the easy installation process.

6. ఆపరేటింగ్ సూచనలు

6.1 ఫ్యాన్ ఆపరేషన్

The ventilation fan is operated via a standard wall switch. Flip the switch to the 'ON' position to activate the fan and begin air circulation. Flip the switch to the 'OFF' position to turn off the fan.

6.2 బ్లూటూత్ స్పీకర్ ఆపరేషన్

The integrated Bluetooth speakers allow for wireless audio streaming. The speakers are activated by a separate wall switch, typically labeled 'Speaker' or 'Bluetooth'.

1. Activate Speakers: Turn on the dedicated 'Speaker' or 'Bluetooth' wall switch. The speakers will enter pairing mode.
2. మీ పరికరాన్ని జత చేయడం: On your Bluetooth-enabled device (e.g., smartphone, tablet), navigate to the Bluetooth settings. Look for a device named "Sensonic Vent Fan" in the list of available devices.
3. కనెక్ట్ చేయండి: Select "Sensonic Vent Fan" to pair and connect. Once connected, you will hear an audible confirmation tone from the speakers.
4. ఆడియోను ప్లే చేయండి: Begin playing audio from your device. The sound will now stream through the fan's speakers.
5. డిస్‌కనెక్ట్: To disconnect, simply turn off the 'Speaker' or 'Bluetooth' wall switch, or disconnect from your device's Bluetooth settings.

గమనిక: The fan and the Bluetooth speakers can be operated independently or simultaneously, depending on your wiring configuration and switch setup.

Image 6.1: The Broan-NuTone SPK110, highlighting its Bluetooth speaker functionality for seamless audio streaming.

7. నిర్వహణ

క్రమం తప్పకుండా నిర్వహణ మీ వెంటిలేషన్ ఫ్యాన్ యొక్క ఉత్తమ పనితీరును మరియు దీర్ఘాయువును నిర్ధారిస్తుంది.

7.1 గ్రిల్ శుభ్రపరచడం

1. పవర్ డిస్‌కనెక్ట్ చేయండి: Always turn off power at the service panel before cleaning.
2. గ్రిల్ తొలగించండి: Gently pull down the grille assembly to release the torsion springs and detach it from the fan housing.
3. శుభ్రం: Wash the grille with a mild detergent and warm water. Rinse thoroughly and dry completely before reinstallation.
4. Reinstall Grille: Reattach the grille by squeezing the torsion springs and inserting them into the slots in the fan housing. Push the grille firmly against the ceiling.

7.2 Cleaning the Fan Interior

Periodically, the fan's interior components may require cleaning.

1. పవర్ డిస్‌కనెక్ట్ చేయండి: సర్వీస్ ప్యానెల్ వద్ద పవర్ ఆఫ్ చేయండి.
2. గ్రిల్ తొలగించండి: Follow the steps above to remove the grille.
3. Clean Fan Blades/Motor: Use a soft cloth or brush to carefully remove dust and debris from the fan blades and motor housing. Avoid using excessive moisture.
4. మళ్లీ కలపండి: Once clean, reassemble the fan and grille, then restore power.

8. ట్రబుల్షూటింగ్

If you encounter issues with your Broan-NuTone SPK110, refer to the following common troubleshooting steps:

8.1 Fan Not Operating

• శక్తిని తనిఖీ చేయండి: Ensure the wall switch is in the 'ON' position and that power is supplied to the circuit breaker.
• వదులుగా ఉండే కనెక్షన్‌లు: Verify all electrical connections are secure (ensure power is off before checking).
• అడ్డంకులు: Check for any obstructions in the fan blades or ductwork.

8.2 Bluetooth Speaker Not Connecting/Poor Sound

• స్పీకర్ పవర్: Ensure the dedicated 'Speaker' or 'Bluetooth' wall switch is in the 'ON' position.
• పరికర బ్లూటూత్: Confirm Bluetooth is enabled on your audio device.
• జత చేసే మోడ్: If the fan was recently installed or power cycled, it may need to re-enter pairing mode. Turn the speaker switch off and on again.
• పరికరాన్ని మర్చిపో: On your audio device, "forget" the "Sensonic Vent Fan" and attempt to pair again.
• దూరం: Ensure your audio device is within the Bluetooth range of the fan.
• వాల్యూమ్: Check the volume levels on both your audio device and the fan (if adjustable via the device).

Image 8.1: The internal components of the Broan-NuTone SPK110, showing the fan motor and integrated speakers.

9. వారంటీ మరియు మద్దతు

The Broan-NuTone SPK110 Bluetooth Speaker Ventilation Fan comes with a 3-సంవత్సరం పరిమిత వారంటీ. ఈ వారంటీ సాధారణ ఉపయోగం మరియు సేవలో పదార్థాలు మరియు పనితనంలో లోపాలను కవర్ చేస్తుంది.

For detailed warranty information, technical support, or to purchase replacement parts, please visit the official Broan-NuTone webసైట్ లేదా వారి కస్టమర్ సర్వీస్ విభాగాన్ని సంప్రదించండి. వారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.