Avanti WD360

అవంతి WD360 వాటర్ కూలర్ డిస్పెన్సర్ యూజర్ మాన్యువల్

Model: WD360 | Brand: Avanti

పరిచయం

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Avanti WD360 Top Loading Water Cooler Dispenser. Please read this manual thoroughly before using the appliance and retain it for future reference. This dispenser provides convenient access to cold and room temperature water from 3 or 5-gallon bottles.

Avanti WD360 Water Cooler Dispenser, front angled view

Figure 1: Avanti WD360 Water Cooler Dispenser, front angled view.

భద్రతా సమాచారం

అగ్ని ప్రమాదం, విద్యుత్ షాక్ లేదా గాయం ప్రమాదాన్ని తగ్గించడానికి, ఈ ప్రాథమిక జాగ్రత్తలను అనుసరించండి:

  • ఉపకరణాన్ని ఉపయోగించే ముందు అన్ని సూచనలను చదవండి.
  • సరిగ్గా గ్రౌండ్ చేయబడిన అవుట్‌లెట్‌లకు మాత్రమే కనెక్ట్ చేయండి.
  • పవర్ కార్డ్, ప్లగ్ లేదా ఉపకరణంలోని ఏదైనా భాగాన్ని నీటిలో లేదా ఇతర ద్రవాలలో ముంచవద్దు.
  • ఉపకరణం ఉపయోగంలో ఉన్నప్పుడు పిల్లలను పర్యవేక్షించండి.
  • శుభ్రపరిచే లేదా సర్వీసింగ్ చేసే ముందు ఉపకరణాన్ని అన్‌ప్లగ్ చేయండి.
  • పాడైపోయిన త్రాడు లేదా ప్లగ్‌తో లేదా ఉపకరణం పనిచేయకపోవడం లేదా ఏ పద్ధతిలో పాడైపోయిన తర్వాత ఏ పరికరాన్ని ఆపరేట్ చేయవద్దు.
  • యూనిట్ చుట్టూ తగినంత వెంటిలేషన్ ఉండేలా చూసుకోండి. వెంటిలేషన్ ఓపెనింగ్‌లను బ్లాక్ చేయవద్దు.
  • Place the dispenser on a firm, level surface to prevent tipping.
  • ఈ ఉపకరణం ఇండోర్ ఉపయోగం కోసం మాత్రమే రూపొందించబడింది.

ప్యాకేజీ విషయాలు

ప్యాకేజింగ్‌లో అన్ని వస్తువులు ఉన్నాయని నిర్ధారించుకోండి:

  • Avanti WD360 Water Cooler Dispenser Unit
  • తొలగించగల డ్రిప్ ట్రే
  • వినియోగదారు మాన్యువల్ (ఈ పత్రం)

Note: 3 or 5-gallon water bottles are not included and must be purchased separately.

సెటప్

  1. అన్‌ప్యాకింగ్: Carefully remove the dispenser from its packaging. Remove all packing materials, including any tape or protective film.
  2. ప్లేస్‌మెంట్: Place the water cooler on a flat, level, and stable surface. Ensure there is at least 4 inches (10 cm) of clearance from the back and sides of the unit to allow for proper ventilation. Avoid placing the unit in direct sunlight or near heat sources.
  3. ప్రారంభ శుభ్రపరచడం: Before first use, clean the drip tray and the water reservoir. Refer to the 'Maintenance' section for detailed cleaning instructions.
  4. వాటర్ బాటిల్‌ను ఇన్‌స్టాల్ చేయండి: Remove the cap from a 3 or 5-gallon water bottle. Carefully lift the bottle and invert it, placing it firmly onto the loading spike at the top of the dispenser. Ensure the bottle is seated securely and water begins to flow into the reservoir.
Avanti WD360 Water Cooler Dispenser with a 5-gallon water bottle installed on top

Figure 2: Water bottle installation on the top-loading dispenser.

  1. పవర్ కనెక్ట్ చేయండి: పవర్ కార్డ్‌ను గ్రౌన్దేడ్ ఎలక్ట్రికల్ అవుట్‌లెట్‌లోకి ప్లగ్ చేయండి.
  2. శీతలీకరణను సక్రియం చేయండి: Locate the switches on the back of the unit. Turn on the switch labeled 'COLD' to activate the cooling function. Allow approximately 15-30 minutes for the water to reach its optimal cold temperature.
వెనుకకు view of the Avanti WD360 Water Cooler Dispenser showing the power cord and cooling switch

చిత్రం 3: వెనుక view of the dispenser, highlighting the power cord and cooling switch.

ఆపరేటింగ్ సూచనలు

Your Avanti WD360 Water Cooler Dispenser offers two temperature options: cold and room temperature.

Close-up of the two water dispensing spouts on the Avanti WD360, one for cold and one for room temperature water

Figure 4: Dispensing spouts for cold and room temperature water.

  • చల్లటి నీటిని పంపిణీ చేయడం: Place a glass or cup under the blue-colored spout (typically on the right). Press the lever down to dispense cold water. Release the lever to stop the flow.
  • గది ఉష్ణోగ్రత నీటిని పంపిణీ చేయడం: Place a glass or cup under the white-colored spout (typically on the left). Press the lever down to dispense room temperature water. Release the lever to stop the flow.

The cooling function can be controlled by the switch located on the back of the unit.

Close-up of the back of the Avanti WD360 showing the green power switch and the 'COOL' indicator light

Figure 5: Rear switches and indicator light for cooling function.

నిర్వహణ

Regular cleaning and maintenance will ensure the longevity and hygiene of your water cooler.

  • బాహ్య క్లీనింగ్: బాహ్య ఉపరితలాలను మృదువైన, డితో తుడవండిamp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
  • డ్రిప్ ట్రేని శుభ్రపరచడం: The drip tray is removable for easy cleaning. Periodically empty and wash the drip tray with mild soap and water. Rinse thoroughly and dry before reinserting.
Close-up of the removable gray drip tray on the Avanti WD360 Water Cooler Dispenser

Figure 6: Removable drip tray for easy cleaning.

  • నీటి రిజర్వాయర్ శుభ్రపరచడం: For thorough cleaning, unplug the unit and remove the water bottle. Drain any remaining water from the reservoir through the spouts. The stainless steel reservoir can be cleaned with a solution of mild soap and water or a food-grade sanitizing solution. Rinse thoroughly multiple times to remove all cleaning agents before reattaching a new water bottle.
పై నుండి క్రిందికి view into the stainless steel water reservoir of the Avanti WD360 Water Cooler Dispenser

మూర్తి 7: View of the stainless steel water reservoir.

ట్రబుల్షూటింగ్

Review కస్టమర్ సపోర్ట్‌ను సంప్రదించే ముందు ఈ క్రింది సాధారణ సమస్యలు మరియు పరిష్కారాలను పరిశీలించండి.

సమస్యసాధ్యమైన కారణంపరిష్కారం
నీటి సరఫరా లేదుWater bottle empty or not properly seated.Replace water bottle or ensure it is correctly installed.
చల్లటి నీరు లేదుCooling switch is off. Unit not plugged in. Insufficient time for cooling.Ensure the 'COLD' switch on the back is ON. Check power connection. Allow 15-30 minutes for cooling after initial setup or power-on.
Water has unusual taste/smellUnit needs cleaning. Water bottle is old or contaminated.Clean the water reservoir and spouts thoroughly (see Maintenance). Replace the water bottle with a fresh one.
యూనిట్ నుంచి నీరు కారుతోందిWater bottle cracked or improperly seated. Drip tray overflowing.Check water bottle for cracks and ensure it is seated correctly. Empty the drip tray.

స్పెసిఫికేషన్లు

మోడల్WD360
బ్రాండ్అవంతి
రంగుతెలుపు
మెటీరియల్Plastic (with Stainless Steel Reservoir)
కెపాసిటీAccommodates 3 or 5 Gallon Water Bottles
ఉత్పత్తి కొలతలు (D x W x H)12.5" x 11.5" x 34"
వస్తువు బరువు23 పౌండ్లు
వాట్tage1800 వాట్స్
సంస్థాపన రకంఅర్మానీ
లొకేషన్ యాక్సెస్టాప్ లోడ్ అవుతోంది
ఉష్ణోగ్రత సెట్టింగులుCold, Room Temperature
UPC798412236024

వారంటీ మరియు మద్దతు

This Avanti product is covered by a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your purchase or visit the official Avanti website. For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Avanti customer support.

Avanti Customer Support:

  • Refer to your product registration information for contact details.
  • Visit the official Avanti webఅత్యంత తాజా మద్దతు సమాచారం కోసం సైట్.

సంబంధిత పత్రాలు - WD360

ముందుగాview అవంతి WDTZ000 హాట్ అండ్ కోల్డ్ వాటర్ డిస్పెన్సర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్
అవంతి WDTZ000 హాట్ అండ్ కోల్డ్ వాటర్ డిస్పెన్సర్ కోసం సమగ్ర సూచనల మాన్యువల్, సెటప్, ఆపరేషన్, భద్రతా మార్గదర్శకాలు, నిర్వహణ మరియు ట్రబుల్షూటింగ్‌ను కవర్ చేస్తుంది. వారంటీ సమాచారం కూడా ఉంటుంది.
ముందుగాview అవంతి WDTZ000 హాట్ అండ్ కోల్డ్ వాటర్ డిస్పెన్సర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్
Comprehensive instruction manual for the Avanti WDTZ000 Hot and Cold Water Dispenser, covering safety, operation, installation, maintenance, troubleshooting, and warranty information. Includes support contact details and product specifications.
ముందుగాview అవంతి WDC750WIH వాటర్ డిస్పెన్సర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్
అవంతి WDC750WIH వాటర్ డిస్పెన్సర్ కోసం సమగ్ర సూచనల మాన్యువల్, భద్రత, ఇన్‌స్టాలేషన్, ఆపరేషన్, ట్రబుల్షూటింగ్ మరియు వారంటీని కవర్ చేస్తుంది. స్పానిష్ సూచనలు ఉన్నాయి.
ముందుగాview అవంతి WDTZ000 వాటర్ డిస్పెన్సర్ & జీరోవాటర్ ఫిల్టర్ బాటిల్ యూజర్ గైడ్‌లు
అవంతి WDTZ000 హాట్ అండ్ కోల్డ్ వాటర్ డిస్పెన్సర్ మరియు జీరోవాటర్ ఫిల్టర్ బాటిల్ సిస్టమ్ కోసం ఇంగ్లీష్ మరియు స్పానిష్ భాషలలో సెటప్, ఆపరేషన్, నిర్వహణ మరియు ట్రబుల్షూటింగ్‌ను కవర్ చేసే సంయుక్త సూచన మరియు వినియోగ మార్గదర్శకాలు.
ముందుగాview అవంతి MT09V0W/MT09V1B/MT09V3S మైక్రోవేవ్ ఓవెన్ ఇన్‌స్ట్రక్షన్ మాన్యువల్
అవంతి MT09V0W, MT09V1B, మరియు MT09V3S మైక్రోవేవ్ ఓవెన్‌ల కోసం యూజర్ మాన్యువల్. భద్రతా సూచనలు, ఇన్‌స్టాలేషన్ గైడ్, ఆపరేటింగ్ విధానాలు, కంట్రోల్ ప్యానెల్ వివరాలు, వంట పద్ధతులు, సంరక్షణ మరియు నిర్వహణ, ట్రబుల్షూటింగ్ మరియు వారంటీ సమాచారాన్ని అందిస్తుంది.
ముందుగాview Avanti WDP69 Water Dispenser: Instruction Manual and User Guide
Comprehensive instruction manual for the Avanti WDP69 hot and cold water dispenser. Includes installation, operation, maintenance, troubleshooting, and warranty information.