పరిచయం
Welcome to the Gmatrix A-TV10 multi-functional waterproof remote control. This remote is specifically designed for simplicity and ease of use, featuring only six large, essential buttons. Its user-friendly design aims to provide a comfortable and straightforward television control experience, making it an essential household item.
ఉత్పత్తి ముగిసిందిview
The Gmatrix A-TV10 remote control is engineered for simplicity and durability. Its robust design includes a waterproof casing and large, clearly labeled buttons for effortless operation.
మూర్తి 1: ముందు view of the Gmatrix A-TV10 remote control, showcasing its large, clearly labeled buttons and compact design.
చిత్రం 2: కోణీయ view highlighting the ergonomic shape and button layout of the remote control.
మూర్తి 3: వైపు view illustrating the battery compartment and its secure, waterproof design.
సెటప్
1. బ్యాటరీ ఇన్స్టాలేషన్
The Gmatrix A-TV10 remote requires two AAA batteries (not included).
- To open the battery compartment, pull the lanyard while simultaneously pushing the small button located on the back of the remote.
- బ్యాటరీ కవర్ని జాగ్రత్తగా తొలగించండి.
- సరైన ధ్రువణతను (+/-) నిర్ధారించుకోవడానికి రెండు AAA బ్యాటరీలను చొప్పించండి.
- Replace the battery cover by aligning it and pushing firmly until it clicks into place, ensuring a secure, waterproof seal.
గమనిక: If the remote control does not function after battery installation, ensure the batteries are inserted correctly. If the LED indicator light blinks continuously, replace with new batteries.
2. రిమోట్ను ప్రోగ్రామింగ్ చేయడం
The Gmatrix A-TV10 remote can be programmed using an automatic search method or a learning function. It is compatible with standard televisions or televisions with an inserted direct line cable. It is అనుకూలంగా లేదు with cable boxes or satellite receivers.
Method A: Automatic Search (Recommended)
- Point the A-TV10 remote directly at your television.
- నొక్కండి మరియు పట్టుకోండి సెట్ button for approximately 7 seconds. The indicator light on the remote will illuminate. Release the button.
- The remote will begin searching for your TV's code. Observe your television screen.
- As soon as your television turns off, immediately press the సెట్ button again to save the code.
ముఖ్యమైన: It is crucial to press the సెట్ button immediately after the TV turns off. If you delay, the remote may continue searching, and the correct code might be missed.
Method B: Learning Function (for specific buttons)
This function allows the A-TV10 to learn commands from your original TV remote for specific buttons.
- నొక్కండి మరియు పట్టుకోండి సెట్ button for approximately 3 seconds. While still holding సెట్, నొక్కి పట్టుకోండి VOL+ button for approximately 5 seconds. The indicator light will turn on. Release both buttons. The remote is now in learning mode.
- Place your original TV remote control and the Gmatrix A-TV10 remote control facing each other, with their infrared emitters aligned, at a distance of 3-5 cm.
- On your original remote, press the button you wish to teach (e.g., Power). The Gmatrix A-TV10's indicator light will flash three times.
- Immediately press the corresponding button on the Gmatrix A-TV10 remote (e.g., Power). The indicator light will flash three times again, confirming the code has been learned.
- Repeat steps 3 and 4 for any other buttons you wish to program using the learning function.
- To exit learning mode and save the learned codes, press the సెట్ బటన్.
గమనిక: If the indicator light flashes three times and then you hold a key for 10 seconds, the learning state will be exited without saving.
ఆపరేటింగ్ సూచనలు
Once programmed, the Gmatrix A-TV10 remote provides simple control over your television with its six large buttons:
- పవర్ బటన్ (ఎరుపు): మీ టెలివిజన్ను ఆన్ లేదా ఆఫ్ చేస్తుంది.
- VOL+ / VOL- బటన్లు: వాల్యూమ్ను పైకి లేదా క్రిందికి సర్దుబాటు చేయండి.
- CH+ / CH- Buttons: Change channels up or down.
- మ్యూట్ బటన్: టెలివిజన్ ఆడియోను మ్యూట్ చేస్తుంది లేదా అన్మ్యూట్ చేస్తుంది.
- AV Button: Switches between video input sources (e.g., TV, HDMI, AV).
- SET Button (Red): Used for programming and learning functions. Not for daily TV operation.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Remote does not work after battery installation. | Incorrect battery polarity; dead batteries. | Ensure batteries are inserted correctly (+/-). Replace with new AAA batteries. |
| LED indicator light blinks continuously. | తక్కువ బ్యాటరీ శక్తి. | కొత్త AAA బ్యాటరీలతో భర్తీ చేయండి. |
| Remote does not control the TV after programming. | Incorrect code saved; programming error. | Repeat the programming steps carefully, especially the automatic search method. Ensure you press సెట్ immediately when the TV turns off. |
| Remote does not work with cable box or satellite receiver. | Product limitation. | The Gmatrix A-TV10 is designed for direct TV control and is not compatible with external set-top boxes. |
స్పెసిఫికేషన్లు
- మోడల్ సంఖ్య: A-TV10
- ఉత్పత్తి కొలతలు: 6 x 2 x 1 అంగుళాలు
- వస్తువు బరువు: 3.2 ఔన్సులు
- బ్యాటరీలు అవసరం: 2 AAA బ్యాటరీలు (చేర్చబడలేదు)
- కనెక్టివిటీ టెక్నాలజీ: ఇన్ఫ్రారెడ్
- అనుకూల పరికరాలు: టెలివిజన్
- మద్దతు ఉన్న పరికరాల గరిష్ట సంఖ్య: 2 (via learning function for specific buttons)
- ప్రత్యేక ఫీచర్: Universal, Waterproof
వారంటీ మరియు మద్దతు
For information regarding warranty coverage or technical support for your Gmatrix A-TV10 Universal Waterproof Remote Control, please refer to the product packaging or contact Gmatrix customer service directly. Contact details can typically be found on the manufacturer's official website or within the product's sales documentation.
