పరిచయం
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Paradox DCTXP2/86 868 MHz Radio Magnetic Contact. This device is designed to enhance the security of your premises by detecting the opening and closing of doors and windows. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
ఉత్పత్తి ముగిసిందిview
The Paradox DCTXP2/86 is a supervised radio magnetic contact operating at 868 MHz, specifically designed for doors and windows. It features two independent radio channels and the capability to connect one external sensor. An anti-tamper switch is integrated for enhanced security.
- ఫ్రీక్వెన్సీ: 868 MHz version.
- ఛానెల్లు: Two independent radio channels.
- బాహ్య సెన్సార్: Possibility to connect one external sensor.
- Tamper రక్షణ: Includes an anti-tampఎర్ స్విచ్.
- వర్తింపు: Conforms to EN50131-2-6 Grade 2.
The image displays the Paradox DCTXP2/86 radio magnetic contact. It consists of two main components: a larger rectangular sensor unit and a smaller rectangular magnet. Both components are white and designed to be mounted on a door or window frame and its corresponding moving part.
సెటప్ మరియు ఇన్స్టాలేషన్
1. బ్యాటరీ ఇన్స్టాలేషన్
The DCTXP2/86 requires two AAA alkaline batteries for operation. Ensure correct polarity when inserting the batteries.
- సి ని జాగ్రత్తగా తెరవండిasinప్రధాన సెన్సార్ యూనిట్ యొక్క గ్రా.
- Insert two AAA alkaline batteries into the designated battery compartment, observing the polarity markings (+/-).
- cని మూసివేయండిasinగ్రా సురక్షితంగా.
2. Mounting the Contact
The magnetic contact consists of two parts: the main sensor unit and the magnet. They should be mounted on the door/window frame and the moving part (door/window) respectively, ensuring they are aligned and in close proximity when the door/window is closed.
- Choose a mounting location where the sensor and magnet can be securely attached and are not easily accessible to intruders.
- Mount the larger sensor unit on the fixed frame of the door or window.
- Mount the smaller magnet on the moving part of the door or window, directly opposite the sensor unit.
- Ensure the gap between the sensor and the magnet is minimal (typically less than 1 cm) when the door/window is closed for reliable detection.
- Use screws or strong adhesive pads (not included) for secure mounting.
3. Programming/Pairing with Alarm System
The DCTXP2/86 needs to be programmed into your Paradox alarm system. Refer to your alarm system's main control panel manual for specific instructions on adding wireless zones. The DCTXP2/86 offers two independent radio channels that can be assigned to different zones.
- Access the programming mode of your Paradox alarm control panel.
- Select the option to add a new wireless zone or device.
- Activate the DCTXP2/86 (e.g., by opening and closing the contact, or by triggering the tamper switch) to transmit its unique serial number to the control panel.
- Assign the contact to the desired zone(s) and configure its attributes (e.g., entry/exit, perimeter, 24-hour).
- Test the communication and detection by opening and closing the protected door/window.
ఆపరేటింగ్ సూచనలు
Once properly installed and programmed, the Paradox DCTXP2/86 operates automatically. When the protected door or window is opened, the magnetic contact separates, triggering an alarm signal to the control panel. When the door or window is closed, the contact re-establishes, and the zone returns to a normal state.
- గుర్తింపు: The sensor detects the separation of the magnet from the main unit.
- పర్యవేక్షణ: The DCTXP2/86 is a supervised device, meaning it periodically communicates with the control panel to confirm its presence and operational status. If communication is lost, the control panel will indicate a fault.
- Tamper రక్షణ: ఉంటే సిasing of the main sensor unit is opened, the integrated tamper switch will trigger an alarm, even if the system is disarmed.
- బాహ్య సెన్సార్ ఇన్పుట్: The two independent radio channels allow for monitoring of the magnetic contact itself and an additional wired sensor connected to the DCTXP2/86's input terminals.
నిర్వహణ
బ్యాటరీ భర్తీ
The control panel will typically indicate a low battery condition for the DCTXP2/86. Replace batteries promptly to ensure continuous protection.
- Disarm your alarm system before replacing batteries to avoid false alarms.
- సి తెరవండిasinప్రధాన సెన్సార్ యూనిట్ యొక్క గ్రా.
- పాత AAA బ్యాటరీలను తొలగించండి.
- Insert new AAA alkaline batteries, ensuring correct polarity.
- cని మూసివేయండిasing securely. The tamper switch will activate briefly, and the device will re-establish communication with the control panel.
క్లీనింగ్
Clean the device periodically with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or internal components. Ensure the sensor and magnet surfaces are free from dirt or debris that could interfere with their operation.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Device not detecting opening/closing. |
|
|
| Control panel shows "Low Battery" for the device. | బ్యాటరీలు అయిపోతున్నాయి. | Replace both AAA batteries immediately. |
| Tamper alarm triggered unexpectedly. |
|
|
| Device not communicating with control panel. |
|
|
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Paradox technical support or a certified alarm system installer.
స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ | DCTXP2/86 |
| ఫ్రీక్వెన్సీ | 868 MHz |
| కొలతలు (L x W x H) | 11.2 x 3.2 x 2.5 cm (approx. 112x32x25 mm as per description) |
| బరువు | 50 గ్రాములు |
| శక్తి మూలం | బ్యాటరీ ఆపరేట్ చేయబడింది |
| బ్యాటరీ రకం | 2 x AAA Alkaline batteries (not included with product, but required for operation) |
| అదనపు ఫీచర్లు | Dust resistant, 2 independent radio channels, external sensor input, anti-tampఎర్ స్విచ్ |
| వర్తింపు | EN50131-2-6 గ్రేడ్ 2 |
వారంటీ మరియు మద్దతు
For information regarding the warranty of your Paradox DCTXP2/86, please refer to the warranty card included with your product or visit the official Paradox webసైట్. వారంటీ నిబంధనలు మరియు షరతులు ప్రాంతాన్ని బట్టి మారవచ్చు.
If you require technical assistance, support, or have questions about your device, please contact your authorized Paradox dealer or Paradox customer support. Contact information can typically be found on the Paradox webసైట్ లేదా మీ ఉత్పత్తి డాక్యుమెంటేషన్లో.
It is recommended that installation and maintenance of security system components be performed by qualified professionals.
