Lepro 12V LED Strip Light User Manual

1. ఉత్పత్తి ముగిసిందిview

The Lepro 12V LED Strip Light provides flexible, warm white illumination for various indoor applications. This non-waterproof strip features SMD 2835 LEDs, offering high brightness and low power consumption. It is designed for easy installation with a self-adhesive backing and can be cut and reconnected to fit specific lengths.

ప్యాకేజీ విషయాలు

• 2 x Lepro 12V LED Strip Lights (32.8 ft each)
• వినియోగదారు మాన్యువల్

Note: A 12V power adapter is not included and must be purchased separately.

Image 1.1: Contents of the Lepro LED Strip Light package, showing two reels of LED strips and the instruction manual.

2. భద్రతా మార్గదర్శకాలు

దయచేసి ఇన్‌స్టాలేషన్ మరియు వినియోగానికి ముందు అన్ని భద్రతా సూచనలను చదివి అర్థం చేసుకోండి. ఈ సూచనలను పాటించడంలో విఫలమైతే విద్యుత్ షాక్, అగ్ని ప్రమాదం లేదా ఇతర ప్రమాదాలు సంభవించవచ్చు.

• విద్యుత్ సరఫరా: Only use a 12V DC power adapter. Do not use power adapters higher than 12V, as this will damage the LED strip and pose a safety risk. Ensure the total wattagLED స్ట్రిప్ లైట్ల e గరిష్ట వాట్‌ను మించకూడదుtage of your power adapter.
• ఇండోర్ ఉపయోగం మాత్రమే: This product is non-waterproof and designed for indoor use only. Avoid exposure to water, moisture, or high humidity.
• సంస్థాపన ఉపరితలం: Ensure the installation surface is clean, dry, and smooth to ensure proper adhesion.
• కట్టింగ్: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the circuit and render that section unusable.
• వేడి: While LED strips generate minimal heat, ensure proper ventilation around the installed strip. Do not cover the strip with materials that could trap heat.
• పిల్లలు: పని వాల్యూమ్tage is 12V DC, making it safe to touch. However, keep small components and packaging materials away from children.

3. సెటప్ మరియు ఇన్‌స్టాలేషన్

3.1 సంస్థాపనకు ముందు

1. మీ లేఅవుట్‌ను ప్లాన్ చేయండి: Determine the desired path for your LED strip. Measure the length required.
2. ఉపరితలాన్ని శుభ్రం చేయండి: Thoroughly clean the installation surface with a dry cloth to remove dust, dirt, or oil. A clean surface ensures optimal adhesion of the self-adhesive backing.
3. Test the Strip: Before permanent installation, connect the LED strip to a 12V power adapter to ensure it functions correctly.

3.2 Connecting the Strip Light

The LED strip requires a 12V DC power adapter (not included) for operation. Ensure the power adapter's connector matches the strip's connector.

1. Locate the DC input connector on the LED strip.
2. Connect the output plug of your 12V DC power adapter to the strip's input connector. Ensure a secure connection.
3. పవర్ అడాప్టర్‌ను ప్రామాణిక వాల్ అవుట్‌లెట్‌లోకి ప్లగ్ చేయండి.

Image 3.1: Connection diagram illustrating how to connect the LED strip to a 12V power supply. The power adapter is sold separately.

3.3 Mounting the Strip Light

The LED strip features a self-adhesive backing for easy mounting. If you need to adjust the length, the strip can be cut at specific points.

1. Prepare for Adhesion: Peel off a small section of the protective film from the self-adhesive backing at one end of the strip.
2. స్ట్రిప్‌ను వర్తించండి: Carefully press the exposed adhesive section onto your cleaned surface. Gradually peel off more of the protective film while pressing the strip firmly along your desired path.
3. కట్టింగ్ (అవసరమైతే): If the strip is too long, locate the designated cut marks, typically indicated by a copper pad and a scissor icon. Use sharp scissors to cut precisely along this line. The strip can be cut every 3 LEDs (approximately 2 inches).
4. Reconnection (optional): If you cut the strip and wish to reconnect sections or connect to other accessories, 2-pin 8mm connectors (not included) are required.

Image 3.2: Step-by-step installation guide showing surface preparation, adhesive application, and how to cut the LED strip at designated marks.

4. ఆపరేటింగ్ సూచనలు

Operating the Lepro 12V LED Strip Light is straightforward once installed:

• పవర్ ఆన్/ఆఫ్: Connect the 12V DC power adapter to a power outlet to turn the lights on. Disconnect or use a switch on your power adapter (if available) to turn them off.
• ప్రకాశం: This specific model of LED strip light is మసకబారదు. It operates at a fixed brightness when powered on.

5. సంరక్షణ మరియు నిర్వహణ

Proper care ensures the longevity and performance of your LED strip lights:

• శుభ్రపరచడం: If cleaning is necessary, ensure the power is disconnected. Gently wipe the strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• నిల్వ: If removing the strip for storage, carefully peel it off the surface. Roll it loosely back onto its original reel or a similar spool to prevent kinking or damage. Store in a cool, dry place.
• పదునుగా వంగడం మానుకోండి: Do not bend the LED strip at sharp angles, as this can damage the internal circuitry.

6. ట్రబుల్షూటింగ్

If you encounter issues with your Lepro LED Strip Light, refer to the following table for common problems and solutions:

7. ఉత్పత్తి లక్షణాలు

8. వారంటీ మరియు కస్టమర్ మద్దతు

Lepro products are manufactured with quality and reliability in mind. For specific warranty information, please refer to the documentation included with your purchase or visit the official Lepro website. If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through their official channels.

You can often find support contact information on the product packaging or by visiting the Lepro brand store on Amazon: లెప్రో అమెజాన్ స్టోర్.