LAUNCH CNC602A Injector Cleaner and Tester User Manual

1. పరిచయం

The LAUNCH CNC602A Injector Cleaner and Tester is a professional automotive tool designed for comprehensive maintenance of fuel injectors. It performs simultaneous cleaning and testing of multiple injectors, ensuring optimal engine performance and fuel efficiency. This manual provides detailed instructions for safe and effective operation of the device.

2. భద్రతా సమాచారం

• Always operate the unit in a well-ventilated area.
• Do not smoke or use open flames near the cleaning or testing fluids.
• భద్రతా గ్లాసెస్ మరియు చేతి తొడుగులు సహా తగిన వ్యక్తిగత రక్షణ పరికరాలను ధరించండి.
• Ensure the unit is properly grounded before operation.
• Use only recommended cleaning and testing fluids.
• Do not place anything on the control panel that could interfere with operation or cause damage.
• In case of a damaged power supply or short circuit, discontinue use immediately.

3. ఉత్పత్తి భాగాలు మరియు ప్యాకేజీ విషయాలు

The LAUNCH CNC602A comes with a comprehensive set of accessories to facilitate various cleaning and testing procedures.

చిత్రం: Various accessories and cables included with the LAUNCH CNC602A Injector Cleaner and Tester.

ప్యాకేజీ జాబితా:

• 105020217 CNC pulse signal connection cable 1, T=0.5
• 105020218 CNC pulse signal connection cable 2, T=0.8
• 103260037 Ultrasonic cleaner assembly 100W
• 106030038 On-vehicle adaptor package (tool kits)
• 107010428 CNC-602A user manual (En&Ch)
• 103250013 Top-supply connector 1
• 103250015 Swiss thread adaptor for fuel top-supply injector
• 103250016 Coarse thread adaptor for fuel top-supply injector
• 103250018 CNC-601/801 Hexangular stopper
• 104990012 CNC-801 BUICK injector adaptor
• 199010019 Injector testing liquid (pick out)
• 307030024 Injector detergent (pick out)

4. సెటప్

Before operating the unit, ensure it is placed on a stable, level surface and connected to a suitable power supply (AC110V±10%, 50/60Hz).

చిత్రం: Power switch and socket for connecting the unit to a 110V AC power supply.

ప్రారంభ దశలు:

1. పవర్ కనెక్ట్ చేయండి: Plug the unit into a grounded AC110V power outlet.
2. డ్రెయిన్ వాల్వ్‌ను ఇన్‌స్టాల్ చేయండి: Attach the cleaning/testing agent discharge valve to the designated port.
3. Prepare Ultrasonic Bath: Place the ultrasonic cleaning assembly into its designated slot.
4. Install Signal Wires: Connect the pulse signal connection cables to the unit.

5. ఆపరేటింగ్ సూచనలు

The CNC602A offers both ultrasonic cleaning and various testing functions for fuel injectors.

చిత్రం: The control panel with function selection, pulse width adjustment, and pressure controls.

5.1. అల్ట్రాసోనిక్ శుభ్రపరిచే విధానం

1. Pre-clean Injectors: Clean the injector's exterior with gasoline or a suitable cleaning liquid before placing them in the unit.
2. ఇంజెక్టర్లను ఉంచండి: Position the injectors in the ultrasonic bathtub.
3. Add Cleaning Fluid: Pour cleaning fluid into the ultrasonic bathtub, ensuring injectors are submerged.
4. Connect Pulse Signals: Attach the pulse signal cables to the injectors.
5. Activate Ultrasonic System: Turn on the ultrasonic system. The pulsed energy, combined with the cleaning fluid, will dislodge carbon and impurities from inside the injectors.
6. Heat Mode (Optional): If desired, activate the heating mode for enhanced cleaning.

చిత్రం: Injectors undergoing ultrasonic cleaning in the dedicated bath.

5.2. ఇంధన ఇంజెక్టర్ పరీక్షా విధానం

1. Mount Injectors: Secure the cleaned injectors onto the main machine's test bench.
2. Add Test Fluid: Pour the dedicated testing fluid into the fuel tank (4700ml capacity). Ensure the fluid level is within the specified range.
3. పవర్ మరియు సిగ్నల్ కనెక్ట్ చేయండి: Ensure all injectors are correctly connected for power and pulse signals.
4. Select Test Function: Use the control panel to select the desired test function (e.g., Idle Speed Test, Leakage Test, Sprayability Test).
5. పారామితులను సర్దుబాటు చేయండి: Set simulated RPM, time, and pulse width as required for the selected test.
6. పరీక్ష ప్రారంభించండి: Initiate the test and observe injector performance in the graduated cylinders.
7. ఒత్తిడిని సర్దుబాటు చేయండి: Use the pressure adjustment knob to modify system pressure during testing as needed.

Available Testing Functions:

• అల్ట్రాసోనిక్ క్లీనింగ్: Removes carbon deposits and impurities using ultrasonic vibration.
• Idle Speed Test (0-20ms): Simulates engine idling speed to test injector state.
• Medium Speed Test (0-7.5ms): Simulates medium engine speed to test injector state.
• High-Speed Test (0-4ms): Simulates high engine speed to test injector state.
• త్వరణ పరీక్ష: Simulates vehicle acceleration to test injector performance.
• Shift Speed Test: Simulates vehicle shifting state to test injector working performance.
• లీకేజ్ టెస్ట్: Checks the sealing condition of the fuel injector.
• Idle Speed Sprayability Test: Tests spray performance at engine idling state.
• Medium Speed Sprayability Test: Tests spray performance at medium engine speed.
• High-Speed Sprayability Test: Tests spray performance at high engine speed.
• Reverse Flush: Cleans injectors by flowing test liquid from outlet to inlet, removing internal dirt or strainers (for top fuel supply injectors).
• No-Disassembly Cleaning: Direct cleaning without disassembling injectors (requires special adapters).

6. నిర్వహణ

Regular maintenance ensures the longevity and accuracy of your LAUNCH CNC602A unit.

1. ద్రవ నిర్వహణ: After each use, drain all cleaning and testing fluids from the unit. Store fluids properly according to their safety data sheets.
2. క్లీన్ యూనిట్: మెషిన్ యొక్క బాహ్య భాగాన్ని మృదువైన, d తో తుడవండి.amp cloth. Avoid using harsh chemicals that may damage the surface or internal components.
3. భాగాలను తనిఖీ చేయండి: Regularly check all hoses, connections, and adapters for wear, damage, or leaks. Replace any damaged parts immediately.
4. నిల్వ: Store the unit in a clean, dry environment away from direct sunlight and extreme temperatures.

చిత్రం: Fuel intake port and warning label, emphasizing proper fluid handling.

7. ట్రబుల్షూటింగ్

ఈ విభాగం ఆపరేషన్ సమయంలో మీరు ఎదుర్కొనే సాధారణ సమస్యలను పరిష్కరిస్తుంది.

• యూనిట్ పవర్ ఆన్ చేయదు: Check power cable connection and ensure the power switch is in the 'ON' position. Verify the power outlet is functional.
• No ultrasonic cleaning action: Ensure the ultrasonic cleaning function is selected and the cleaning fluid level is adequate. Check connections to injectors.
• Inconsistent spray pattern/flow: Verify that injectors are clean and free of blockages. Check for proper seating of injectors and adapters. Ensure correct pressure settings.
• ద్రవం లీకేజీ: Inspect all connections, hoses, and O-rings for proper sealing. Tighten any loose fittings.
• Pressure gauge not responding: Check the oil supply hose connection and ensure the pressure adjustment knob is functioning correctly.

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

The LAUNCH CNC602A Injector Cleaner and Tester comes with a 1-సంవత్సరాల వారంటీ for damages caused by non-human factors. For any needs or support, please contact customer service. We aim to respond within 24 hours.