True TRUE988284

True 988284 Temperature Control Kit 077B6856 Instruction Manual

Model: TRUE988284

1. ఉత్పత్తి ముగిసిందిview

The True 988284 Temperature Control Kit 077B6856 is a genuine Original Equipment Manufacturer (OEM) replacement part designed for True Refrigeration units. This kit ensures the proper regulation of temperature within your commercial refrigeration equipment, maintaining optimal operating conditions for safety, reliability, and performance.

True 988284 Temperature Control Kit with dial and capillary tube

చిత్రం 1.1: ముగిసిందిview of the True 988284 Temperature Control Kit, showing the control unit, dial, and capillary tube.

ముఖ్య లక్షణాలు:

2. భద్రతా సమాచారం

ముఖ్యమైన: Read all instructions carefully before installation or operation. Failure to follow these instructions may result in property damage, personal injury, or death.

3. ప్యాకేజీ విషయాలు

ప్యాకేజీని తెరిచినప్పుడు అన్ని భాగాలు ఉన్నాయని మరియు దెబ్బతినకుండా ఉన్నాయని ధృవీకరించండి.

Components of the True 988284 Temperature Control Kit including control unit, dial, screws, and connectors

Image 3.1: Contents of the True 988284 Temperature Control Kit, typically including the control module, temperature dial, mounting screws, and electrical connectors.

4. ఇన్‌స్టాలేషన్ సూచనలు

This section provides general guidance for replacing a temperature control kit. Specific installation steps may vary depending on your True Refrigeration model. Refer to your unit's service manual for detailed, model-specific instructions.

  1. పవర్ డిస్‌కనెక్ట్ చేయండి: Locate the main power supply to the refrigeration unit and disconnect it. Verify that power is off using a voltagఇ టెస్టర్.
  2. Access Control Area: Depending on your unit, you may need to remove access panels or grilles to reach the existing temperature control.
  3. డాక్యుమెంట్ వైరింగ్: Before disconnecting any wires, take clear photos or make a diagram of the existing wiring connections to the old temperature control. Note the position of the capillary tube sensor.
  4. Remove Old Control:
    • Carefully disconnect the electrical wires from the old control.
    • Unmount the old control from its housing.
    • Gently remove the capillary tube sensor from its sensing location (e.g., evaporator coil, air return).
  5. Install New Control:
    • Insert the new capillary tube sensor into the exact same sensing location as the old one. Ensure it is securely positioned for accurate temperature readings. Avoid kinking or damaging the tube.
    • Mount the new temperature control module in the same position as the old one using the provided screws.
    • Connect the electrical wires to the new control according to your documented wiring diagram. Ensure connections are secure.
  6. మళ్లీ కలపండి: Replace any access panels or grilles that were removed.
  7. శక్తిని పునరుద్ధరించండి: Reconnect the main power supply to the refrigeration unit.
  8. పరీక్ష ఆపరేషన్: Allow the unit to run for a period and monitor the temperature to ensure proper operation and temperature regulation. Adjust the dial as needed.

గమనిక: If you are unsure about any step, consult a qualified refrigeration technician.

5. ఆపరేటింగ్ సూచనలు

The temperature control kit features a rotary dial for adjusting the desired temperature within your True Refrigeration unit.

6. నిర్వహణ

The True 988284 Temperature Control Kit is designed for durability and reliability. Regular maintenance of the overall refrigeration unit is crucial for its longevity and efficient operation.

7. ట్రబుల్షూటింగ్

If your refrigeration unit is experiencing temperature issues after installing this kit, consider the following common troubleshooting steps:

సమస్యసాధ్యమైన కారణంపరిష్కారం
Unit not cooling or too warm
  • Temperature dial set too high (warmer)
  • Capillary tube not properly seated or damaged
  • వదులైన విద్యుత్ కనెక్షన్
  • Other refrigeration system issues (e.g., low refrigerant, dirty condenser)
  • Adjust dial to a colder setting.
  • Verify capillary tube placement and condition.
  • Check and secure all wiring connections (with power disconnected).
  • Consult a qualified technician for system diagnosis.
Unit freezing contents or too cold
  • Temperature dial set too low (colder)
  • Capillary tube sensing incorrect temperature (e.g., too close to evaporator)
  • కంట్రోల్ యూనిట్ పనిచేయకపోవడం
  • Adjust dial to a warmer setting.
  • Ensure capillary tube is correctly positioned away from direct evaporator contact if applicable.
  • If issues persist, the control unit may require replacement or further diagnosis by a technician.
ఉష్ణోగ్రత విస్తృతంగా హెచ్చుతగ్గులకు లోనవుతుంది
  • Improper capillary tube placement
  • కంట్రోల్ యూనిట్ పనిచేయకపోవడం
  • Refrigeration system issues
  • Verify capillary tube placement.
  • Consult a qualified technician for diagnosis.

హెచ్చరిక: Do not attempt repairs beyond your technical capabilities. Always prioritize safety and consult a professional for complex issues.

8. స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
బ్రాండ్నిజమే
మోడల్ సంఖ్యనిజం988284
ఉత్పత్తి కొలతలు6 x 6 x 4 అంగుళాలు
వస్తువు బరువు4.8 ఔన్సులు
ఆపరేషన్ మోడ్ఆటోమేటిక్
సంప్రదింపు రకంసాధారణంగా తెరవండి
కనెక్టర్ రకంస్క్రూ టెర్మినల్స్
టెర్మినల్స్క్రూ
సర్క్యూట్ రకం1-మార్గం
మౌంటు రకంఉపరితల మౌంట్
యాక్యుయేటర్ రకంపుష్ బటన్
సంప్రదింపు మెటీరియల్రాగి, ఇత్తడి
మొదటి తేదీ అందుబాటులో ఉందిజూన్ 15, 2011

9. వారంటీ మరియు మద్దతు

As a genuine OEM part, this True 988284 Temperature Control Kit is manufactured to high standards. For specific warranty information, please refer to the documentation provided with your original True Refrigeration unit or contact True Refrigeration directly.

కస్టమర్ మద్దతు:

For technical assistance, troubleshooting beyond this manual, or to inquire about warranty claims, please contact True Refrigeration customer support or an authorized service provider.

సంబంధిత పత్రాలు - నిజం988284

ముందుగాview ట్రూ కొమ్మెర్జియెల్ కల్టెక్నిక్: ఆల్జెమీనర్ రెగెలంగ్స్లీట్ఫాడెన్
Umfassender Leitfaden zur Bedienung, Einstelung und Fehlerbehebung von Temperaturregelungen in True kommerziellen Kühl- und Gefriergeräten. ఎంథాల్ట్ అన్లీటుంగెన్ ఫర్ మెకానిస్చె అండ్ ఎలెక్ట్రోనిస్చే స్టీయురుంగెన్ సోవీ స్పెజిఫిస్చే మోడల్లిన్ఫర్మేషన్.
ముందుగాview నిజమైన తయారీ సంస్థాపన మాన్యువల్ త్వరిత ప్రారంభ మార్గదర్శి
ఈ పత్రం TRUE తయారీ వాణిజ్య శీతలీకరణ మరియు తాపన ఉపకరణాల కోసం అవసరమైన సంస్థాపన, ఆపరేషన్ మరియు నిర్వహణ మార్గదర్శకాలను అందిస్తుంది. ఇందులో భద్రతా హెచ్చరికలు, లక్షణాలు, సెటప్ విధానాలు మరియు సంరక్షణ సూచనలు ఉన్నాయి.
ముందుగాview నిజమైన TH మోడల్స్ హీటెడ్ క్యాబినెట్స్ ఇన్‌స్టాలేషన్ మాన్యువల్
ట్రూ TH మోడల్స్ హీటెడ్ క్యాబినెట్‌ల కోసం సమగ్ర ఇన్‌స్టాలేషన్, ఆపరేషన్ మరియు నిర్వహణ గైడ్. ట్రూ మాన్యుఫ్యాక్చరింగ్ కో., ఇంక్ నుండి భద్రత, విద్యుత్, సెటప్, సంరక్షణ మరియు వారంటీ సమాచారాన్ని కవర్ చేస్తుంది.
ముందుగాview ట్రూ T-23DF-HC కమర్షియల్ రిఫ్రిజిరేటర్/ఫ్రీజర్ ఇన్‌స్టాలేషన్ మరియు ఆపరేషన్ మాన్యువల్
ట్రూ T-23DF-HC డ్యూయల్-ఛాంబర్ కమర్షియల్ రిఫ్రిజిరేటర్/ఫ్రీజర్ కోసం సమగ్ర ఇన్‌స్టాలేషన్, ఆపరేషన్, నిర్వహణ మరియు భద్రతా గైడ్. ట్రబుల్షూటింగ్, శుభ్రపరిచే సూచనలు మరియు వారంటీ సమాచారాన్ని కలిగి ఉంటుంది.
ముందుగాview ట్రూ CVM సిరీస్ ఇన్‌స్టాలేషన్ మాన్యువల్
ట్రూ CVM సిరీస్ రిఫ్రిజిరేషన్ యూనిట్ల కోసం సమగ్ర ఇన్‌స్టాలేషన్, ఆపరేషన్ మరియు నిర్వహణ మాన్యువల్. భద్రతా జాగ్రత్తలు, విద్యుత్ అవసరాలు, ఇన్‌స్టాలేషన్ విధానాలు, లెవలింగ్, సీలింగ్, షెల్ఫ్ మౌంటింగ్ మరియు సాధారణ నిర్వహణను కవర్ చేస్తుంది.
ముందుగాview మాన్యుయెల్ డి'ఇన్‌స్టాలేషన్ ఎట్ డి డిమారేజ్ రాపిడ్ ట్రూ
గైడ్ కంప్లీట్ పోర్ ఎల్'ఇన్‌స్టాలేషన్, ఎల్'యూటిలైజేషన్ మరియు ఎల్'ఎంట్రెటియన్ డెస్ అప్రెయిల్స్ డి రిఫ్రిజరేషన్ ఎట్ డి కాంజిలేషన్ ట్రూ మాన్యుఫ్యాక్చరింగ్ కో., ఇంక్. ఇన్‌క్లూట్ డెస్ ఇన్ఫర్మేషన్స్ డి సెక్యూరిట్ ఎస్సెంటియెల్స్ మరియు డెస్ రిసోర్సెస్ పోర్ లె సపోర్ట్.