MODSTER వెక్టర్ SR48 బ్రష్డ్ ఎలక్ట్రిక్ రేసింగ్ బోట్ 2S RTR యూజర్ మాన్యువల్

పరిచయం

ధన్యవాదాలు, ధన్యవాదాలు.asing the MODSTER Vector SR48 Brushed Electric Racing Boat 2S RTR. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new racing boat. Please read this manual thoroughly before operating the boat to ensure optimal performance and safety.

The MODSTER Vector SR48 is a trendy 40 cm racing boat equipped with a powerful brushed motor. Its water-cooled motor system ensures efficient operation, and the body cover is easily removable for convenient battery changes. A key feature of this boat is its self-righting capability, allowing it to automatically flip back upright after capsizing. It supports both forward and reverse motion and can reach speeds of up to 30 km/h.

భద్రతా హెచ్చరికలు

Failure to follow these safety instructions may result in injury or damage to the product or property.

• Never operate the model on public roads or thoroughfares as this could impede traffic and create hazardous situations.
• Never use the model in crowded areas, near or on people or animals to avoid property damage and/or personal injury.
• Always ensure the operating area is clear of obstacles and other watercraft.
• Do not operate the boat in saltwater, as this can damage internal components.
• Keep hands, hair, and loose clothing away from the propeller when the boat is powered on.
• Always disconnect the battery after use and before performing any maintenance.
• Supervise children at all times when operating the boat.
• Do not attempt to modify or disassemble the boat's electronic components.

ప్యాకేజీ విషయాలు

క్రింద జాబితా చేయబడిన అన్ని వస్తువులు మీ ప్యాకేజీలో చేర్చబడ్డాయని దయచేసి ధృవీకరించండి:

• MODSTER Vector SR48 Brushed RTR Racing Boat
• Integrated 390A Brushed Motor
• Integrated Motor Controller/Receiver
• Integrated 9g Steering Servo
• 2.4 GHz Transmitter (Remote Control)
• 2S LiPo ఛార్జర్
• 2S 850 mAh 7.4V Lithium-ion Battery
• బోట్ స్టాండ్
• Instruction Manual (German and English)
• విడి ప్రొపెల్లర్

గమనిక: You will need 1.5V Mignon (AA) batteries for the remote control (not included).

సెటప్

1 బ్యాటరీని ఛార్జ్ చేస్తోంది

Before first use, fully charge the included 2S 850 mAh 7.4V Lithium-ion battery using the provided 2S LiPo charger. Follow the charger's instructions carefully. Do not overcharge the battery.

2. ట్రాన్స్మిటర్లో బ్యాటరీలను ఇన్స్టాల్ చేయడం

Open the battery compartment on the back of the 2.4 GHz transmitter. Insert 1.5V Mignon (AA) batteries (not included), ensuring correct polarity. Close the battery compartment securely.

3. బోట్ బ్యాటరీని ఇన్‌స్టాల్ చేయడం

Carefully remove the body cover of the boat. Connect the fully charged 2S Li-ion battery to the boat's power connector, ensuring a secure fit. Place the battery inside the designated compartment. Reattach the body cover securely to prevent water ingress.

Image: The MODSTER Vector SR48 Racing Boat placed on its stand on a wooden dock, with a hand holding the remote control nearby, illustrating preparation for operation.

4. ప్రారంభ తనిఖీ

Before placing the boat in water, perform a quick inspection:

• Ensure the propeller is free from obstructions and spins freely.
• Check that the rudder moves smoothly when the steering wheel on the transmitter is turned.
• Verify that the body cover is properly sealed.

ఆపరేటింగ్ సూచనలు

1. పవర్ చేయడం

First, turn on the transmitter. Then, place the boat in the water. The boat's power system will activate automatically upon contact with water (water sensor activation). Ensure the boat is placed in water before attempting to operate it.

2. ప్రాథమిక నియంత్రణలు

• థొరెటల్ ట్రిగ్గర్: Pull the trigger to move forward. Push the trigger to move backward (reverse).
• స్టీరింగ్ వీల్: Turn the steering wheel left to turn the boat left, and right to turn the boat right.

Image: An illustrative diagram highlighting key features of the MODSTER Vector SR48, including its speed capability and Ready-To-Run (RTR) status, alongside the boat and remote control.

3. స్వీయ-రైటింగ్ ఫంక్షన్

The MODSTER Vector SR48 is designed with a self-righting feature. If the boat capsizes during operation, simply apply a small amount of throttle or steer the boat, and it will automatically flip back upright, allowing you to continue racing without manual intervention.

Image: A person carefully placing the MODSTER Vector SR48 boat into the water, illustrating the initial launch and the boat's self-righting capability.

4. ఆపరేటింగ్ ఎన్విరాన్మెంట్

Operate the boat in calm, fresh water bodies free from debris, strong currents, or excessive wind. Avoid operating near swimmers, wildlife, or other watercraft. Maintain a clear line of sight to the boat at all times.

నిర్వహణ

1. ప్రతి ఉపయోగం తర్వాత

• ఉపయోగించిన వెంటనే పడవను నీటి నుండి తీసివేయండి.
• Disconnect the battery from the boat and remove it.
• Wipe down the boat's exterior with a soft, dry cloth to remove any water or debris.
• Ensure the internal compartments are dry. If water has entered, carefully dry it out.
• Allow the boat and battery to cool down before storing.

2. Propeller and Rudder Inspection

Regularly inspect the propeller for any damage or entanglement (e.g., weeds, fishing line). Clean as necessary. Check the rudder for smooth movement and ensure all linkages are secure.

3. నిల్వ

Store the boat in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from both the boat and the transmitter if storing for extended periods.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

చిత్రం: వివరణాత్మక ముందు వైపు view of the MODSTER Vector SR48 Brushed Electric Racing Boat, showcasing its sleek design and branding.

వారంటీ మరియు మద్దతు

Information regarding specific warranty terms and conditions for the MODSTER Vector SR48 Brushed Electric Racing Boat is not provided in the product description. Please refer to the included physical instruction manual or contact MODSTER customer support directly for warranty details and technical assistance.

For further support, please visit the official MODSTER website or contact their customer service department using the contact information provided in the product packaging or on their official channels.