PowerWalker AVR 3000 SIV FR Automatic Voltagఇ రెగ్యులేటర్

పరిచయం

This manual provides essential instructions for the safe and efficient operation of your PowerWalker AVR 3000 SIV FR Automatic Voltage Regulator. This device is designed to protect your electronic equipment from voltage fluctuations, ensuring a stable power supply. Please read this manual thoroughly before installation and use.

చిత్రం: ముందు భాగం view of the PowerWalker AVR 3000 SIV FR Automatic Voltage Regulator, showing the display and control panel.

భద్రతా సూచనలు

Observe the following safety precautions to prevent injury or damage to the device and connected equipment:

• ఇండోర్ ఉపయోగం మాత్రమే: This device is intended for indoor use in a controlled environment. Do not expose it to rain, moisture, or direct sunlight.
• సరైన గ్రౌండింగ్: Ensure the power outlet used is properly grounded. Do not remove the grounding prong from the power cord.
• వెంటిలేషన్: Do not block ventilation openings. Allow adequate space around the device for proper airflow to prevent overheating.
• ఓవర్‌లోడ్‌ను నివారించండి: Do not connect equipment that exceeds the device's maximum output capacity (2400 Watts / 3000 VA).
• వినియోగదారుకు సేవ చేయదగిన భాగాలు లేవు: పరికరాన్ని తెరవడానికి లేదా మరమ్మతు చేయడానికి ప్రయత్నించవద్దు. అన్ని సర్వీసింగ్‌లను అర్హత కలిగిన సేవా సిబ్బందికి సూచించండి.
• ద్రవ మరియు విదేశీ వస్తువులు: Keep liquids and foreign objects away from the device.
• అత్యవసర డిస్‌కనెక్ట్: In an emergency, disconnect the device from the main power supply immediately.

ఉత్పత్తి లక్షణాలు మరియు భాగాలు

ముందు ప్యానెల్

చిత్రం: వివరణాత్మకం view of the front panel, highlighting the display, switches, and indicator LEDs.

• ఇన్పుట్ వాల్యూమ్tagఇ డిస్ప్లే: Shows the current incoming AC voltage.
• అవుట్పుట్ వాల్యూమ్tagఇ డిస్ప్లే: Shows the regulated AC voltage supplied to connected devices.
• Delay/Undelay Switch: Controls the output delay function. "DELAY" provides a time delay before output power is supplied, protecting equipment during power fluctuations. "UNDELAY" bypasses this delay.
• వాల్యూమ్tage Range Switch: Selects the operating input voltage range (e.g., 110-280 V or 150-270 V). Ensure this matches your local power supply.
• స్థితి LED లు:
  • సాధారణం (ఆకుపచ్చ): Indicates stable output voltage.
  • Overload (Yellow): Indicates connected load exceeds capacity.
  • Fault (Red): Indicates an internal error or severe voltagఇ సంచిక.
• పవర్ స్విచ్: Turns the device ON or OFF.
• రీసెట్ బటన్: Used to reset the device after an overload or fault condition.

వెనుక ప్యానెల్

చిత్రం: వెనుక view of the device, showing the power input and output sockets.

• ఇన్‌పుట్ సాకెట్: Connects the device to the main AC power supply using the provided power cord.
• అవుట్‌పుట్ సాకెట్లు: Connect your electronic equipment to these sockets for regulated power.

సెటప్

1. అన్‌ప్యాక్ చేసి తనిఖీ చేయండి: Carefully remove the AVR from its packaging. Inspect for any shipping damage. If damage is found, do not use the device and contact your supplier.
2. ప్లేస్‌మెంట్: Place the AVR on a flat, stable surface in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure at least 10 cm (4 inches) of clear space around all ventilation openings.
3. ఇన్‌పుట్ పవర్‌ని కనెక్ట్ చేయండి: Connect the supplied power cord to the AVR's Input Socket on the rear panel, then plug the other end into a properly grounded wall outlet.
4. వాల్యూమ్ ఎంచుకోండిtagఇ పరిధి: On the front panel, set the Voltage Range Switch to match your local input voltage (e.g., 110-280 V or 150-270 V). Refer to your local power utility for exact specifications.
5. పరికరాలను కనెక్ట్ చేయండి: Plug your electronic devices into the Output Sockets on the rear panel of the AVR. Ensure the total power consumption of all connected devices does not exceed 2400 Watts.
6. ప్రారంభ పవర్ ఆన్: Ensure all connected devices are turned off. Flip the Power Switch on the front panel to the "ON" position. The Input and Output Voltage displays will illuminate.

ఆపరేటింగ్ సూచనలు

1. పవర్ ఆన్: After connecting the AVR and your devices, turn on the AVR using the Power Switch. The Input Voltagఇ మరియు అవుట్‌పుట్ వాల్యూమ్tage displays will show the current readings. The "Normal" LED should illuminate.
2. Understanding Displays:
   • ది ఇన్పుట్ వాల్యూమ్tage డిస్ప్లే shows the raw voltage coming from your wall outlet.
   • ది అవుట్పుట్ వాల్యూమ్tage డిస్ప్లే వాల్యూమ్ చూపిస్తుందిtage being supplied to your connected devices after regulation by the AVR. This value should remain stable around 230V.
3. Delay/Undelay Function:
   • స్విచ్‌ని సెట్ చేయండి ఆలస్యం for a time delay (typically 6 seconds) before the output power is supplied. This protects sensitive equipment from rapid power cycling or unstable voltage immediately after a power restoration.
   • స్విచ్‌ని సెట్ చేయండి UNDELAY if you require immediate power output without a delay.
4. Monitoring Status LEDs:
   • Green (Normal): The AVR is operating correctly and providing stable output.
   • Yellow (Overload): The total power consumption of connected devices exceeds the AVR's capacity. Disconnect some devices and press the Reset button.
   • ఎరుపు (తప్పు): An internal error or severe voltage condition has occurred. Turn off the AVR, disconnect it from the wall, and contact support if the issue persists after restarting.
5. పవర్ ఆఫ్: To turn off the AVR, first turn off all connected devices, then flip the Power Switch to the "OFF" position.

నిర్వహణ

• శుభ్రపరచడం: Regularly clean the exterior of the AVR with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and debris.
• వెంటిలేషన్: Periodically check that the ventilation openings are not obstructed to ensure proper heat dissipation.
• నిల్వ: If storing the device for an extended period, ensure it is powered off, disconnected from all power sources and devices, and stored in a cool, dry place.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information, please refer to the documentation included with your purchase or visit the official PowerWalker website. For technical support or service inquiries, please contact your retailer or the PowerWalker customer service department.