Cooper Lighting SDC15

SDC15-W Skye Fan/Light Control

Model: SDC15 | Brand: Cooper Lighting

పరిచయం

This manual provides detailed instructions for the installation, operation, and maintenance of your Cooper Lighting SDC15-W Skye Fan/Light Control. Please read all instructions carefully before beginning installation or use to ensure proper function and safety.

భద్రతా సమాచారం

హెచ్చరిక: To avoid fire, shock, or death; turn off power at circuit breaker or fuse box and test that the power is off before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. It is recommended that a qualified electrician perform this installation.

జాగ్రత్త: For indoor use only. Do not exceed the maximum wattagఇ లేదా amperage ratings. This device is designed for incandescent light fixtures up to 300W and ceiling fans up to 1.5A. Not for use with fluorescent lights, LED lights, or exhaust fans.

సెటప్ మరియు ఇన్‌స్టాలేషన్

Before installation, ensure the power to the circuit is turned off at the circuit breaker. This control is designed for single-gang wall box installation and supports 3-way circuit configurations.

వైరింగ్ సూచనలు

  1. Identify the Line (hot), Load (to fan/light), and Ground wires from your wall box.
  2. Connect the green ground wire from the SDC15 to the bare copper or green ground wire in the wall box.
  3. Connect the black wire labeled 'BK' (Common/Line) from the SDC15 to the incoming Line (hot) wire.
  4. Connect the yellow wire labeled 'YL Light' from the SDC15 to the wire leading to your light fixture.
  5. Connect the yellow wire labeled 'YL Fan' from the SDC15 to the wire leading to your ceiling fan.
  6. Secure all wire connections with appropriate wire nuts.
వెనుకకు view of the SDC15-W Fan/Light Control showing wiring terminals

చిత్రం: వెనుక view of the SDC15-W control, illustrating the screw terminals for wiring connections. Labels for 'YL Light', 'BK', 'YL Fan', and 'GND' are visible, indicating connections for light, common/line, fan, and ground respectively. This view is crucial for correct electrical installation.

వైపు view of the SDC15-W Fan/Light Control

చిత్రం: సైడ్ ప్రోfile of the SDC15-W control, showing its depth and mounting bracket. This view helps in understanding the physical dimensions for fitting into a standard wall box.

మౌంటు

  1. Carefully push the wired control into the wall box.
  2. Secure the control to the wall box using the provided mounting screws.
  3. Attach the wall plate (not included) over the control.
  4. సర్క్యూట్ బ్రేకర్ వద్ద శక్తిని పునరుద్ధరించండి.

ఆపరేటింగ్ సూచనలు

The SDC15-W features two independent slider controls: one for the ceiling fan speed and one for the light dimmer.

ముందు view of the SDC15-W Fan/Light Control

చిత్రం: ముందు భాగం view of the SDC15-W Fan/Light Control, showcasing the two vertical slider controls. The left slider has a fan icon, and the right slider has a light bulb icon, with an 'OFF' position clearly marked between them. This is the primary user interface for controlling fan speed and light intensity.

ఫ్యాన్ స్పీడ్ కంట్రోల్

  • To turn the fan ON, slide the left control lever upwards from the 'OFF' position.
  • Slide the lever further upwards to increase fan speed.
  • Slide the lever downwards to decrease fan speed.
  • To turn the fan OFF, slide the lever all the way down to the 'OFF' position.

లైట్ డిమ్మర్ కంట్రోల్

  • To turn the light ON, slide the right control lever upwards from the 'OFF' position.
  • Slide the lever further upwards to increase light brightness.
  • Slide the lever downwards to decrease light brightness.
  • To turn the light OFF, slide the lever all the way down to the 'OFF' position.

నిర్వహణ

The SDC15-W Fan/Light Control requires minimal maintenance. Ensure the power is off before cleaning.

  • Clean the surface of the control with a soft, damp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
  • Periodically check the mounting screws for tightness.
  • లోపల వినియోగదారునికి సేవ చేయగల భాగాలు లేవు. యూనిట్‌ను విడదీయడానికి ప్రయత్నించవద్దు.

ట్రబుల్షూటింగ్

సమస్యసాధ్యమైన కారణంపరిష్కారం
Fan/Light does not turn ON.No power to the control; Incorrect wiring; Blown fuse/tripped breaker.Check circuit breaker/fuse. Verify wiring connections. Ensure power is restored.
Fan speed or light brightness does not change.Incorrect wiring; Incompatible fan/light type; Control is faulty.Verify wiring. Ensure fan/light is compatible (incandescent for light, standard ceiling fan for fan). Replace control if necessary.
Fan hums or wobbles.Fan motor incompatibility; Fan balance issue.Ensure fan is compatible with solid-state speed controls. Check fan blade balance.
కాంతి మిణుకుమిణుకుమంటుంది లేదా సందడి చేస్తుంది.Incompatible bulb type; Loose bulb; Overloaded circuit.Ensure incandescent bulbs are used. Tighten bulb. Reduce total wattage if exceeding 300W.

స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
మోడల్ సంఖ్యSDC15
ఆపరేషన్ మోడ్మాన్యువల్
ప్రస్తుత రేటింగ్ (అభిమాని)1.5 Amps
వాట్tagఇ (కాంతి)300 Watts (Incandescent Max)
ఆపరేటింగ్ వాల్యూమ్tage120 వోల్ట్లు
ఫ్రీక్వెన్సీ60 Hz
సర్క్యూట్ రకం3-మార్గం
సంప్రదింపు రకంసాధారణంగా తెరవండి
కనెక్టర్ రకంస్క్రూ
యాక్యుయేటర్ రకంPush Button (Slider)
నియంత్రణ పద్ధతిTouch (Slider)
రంగుతెలుపు
కొలతలు (L x W x H)4.25 x 1.75 x 2 అంగుళాలు
వస్తువు బరువు4.8 ఔన్సులు
అంతర్జాతీయ రక్షణ రేటింగ్IP44
తయారీదారుCooper Industries

వారంటీ సమాచారం

Warranty information for the Cooper Lighting SDC15-W Fan/Light Control is typically provided with your purchase or can be obtained directly from the manufacturer. Please retain your proof of purchase for warranty claims.

కస్టమర్ మద్దతు

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Cooper Lighting customer support. Refer to the packaging or the official Cooper Lighting webఅత్యంత తాజా సంప్రదింపు సమాచారం కోసం సైట్.

సంబంధిత పత్రాలు - SDC15

ముందుగాview Cooper Lighting Occupancy and Vacancy Sensors Catalog
Product catalog from Cooper Lighting featuring a range of ultrasonic, PIR, and dual technology occupancy and vacancy sensors for various applications, including wall, ceiling, and fixture mount. Details include catalog numbers, descriptions, UPC codes, weights, quantities, and country of origin.
ముందుగాview LENSGO 15A COB LED లైట్: ఇన్‌స్ట్రక్షన్ మాన్యువల్ & స్పెసిఫికేషన్లు
LENSGO 15A COB LED లైట్ కోసం సమగ్ర సూచనల మాన్యువల్. ఈ పోర్టబుల్ ఫోటోగ్రఫీ లైటింగ్ సొల్యూషన్ కోసం సెటప్, ఆపరేషన్, ఫీచర్లు, స్పెసిఫికేషన్లు మరియు భద్రతా జాగ్రత్తల గురించి తెలుసుకోండి.
ముందుగాview ఈటన్ xDetect శ్వేతపత్రం: CF3000 ఫైర్ ప్యానెల్స్ నుండి xDetect కు వలసపోవడం
A white paper from Eaton exploring the migration path from the discontinued CF3000 fire control panel range to the new xDetect system, focusing on safety, compliance, cost efficiency, and business continuity. It details the challenges of discontinuation and the benefits of upgrading.
ముందుగాview GL LED US లైటింగ్ OMP-300W-12V LED డ్రైవర్ - 300W, 12V DC, IP68
GL LED US లైటింగ్ OMP-300W-12V LED డ్రైవర్ కోసం వివరణాత్మక స్పెసిఫికేషన్లు. 300W గరిష్ట అవుట్‌పుట్, 12V DC, 90-277VAC ఇన్‌పుట్, IP68 రేటింగ్, 5-సంవత్సరాల వారంటీ మరియు స్థిరమైన వాల్యూమ్ ఫీచర్లుtage operation for various lighting applications.
ముందుగాview PROLIGHTS EclExpo Flood300VW User Manual: 300W Asymmetric LED Floodlight
Comprehensive user manual for the PROLIGHTS EclExpo Flood300VW, a 300W asymmetric LED floodlight with variable white CCT (2,700K - 6,500K). Covers safety, installation, DMX control, RDM functions, maintenance, and troubleshooting.
ముందుగాview Harbor Breeze 300W Landscape Lighting Transformer Installation and Operation Manual
Comprehensive guide for installing and operating the Harbor Breeze 300W Landscape Lighting Transformer, including safety instructions, assembly steps, wiring guidance, operating modes, troubleshooting, and warranty information.