పరిచయం
This manual provides detailed instructions for the KeylessOption Keyless Entry Remote Car Key Fob and Key Replacement, model LHJ011. It covers product overview, setup, programming, maintenance, and specifications to ensure proper use and functionality.
ఉత్పత్తి ముగిసిందిview
The KeylessOption LHJ011 is a replacement keyless entry remote and key designed to function identically to your vehicle's original equipment. It includes a fully tested remote with a pre-installed battery and an uncut key blade.
చిత్రం: ముందు భాగం view of two KeylessOption LHJ011 key fobs, each featuring lock and unlock buttons, a red panic button, and an attached uncut key blade. These units are designed for keyless entry and vehicle ignition.
చిత్రం: వెనుకకు view of two KeylessOption LHJ011 key fobs, showing the smooth, black plastic casing and the key ring attachment point. This view highlights the compact design of the remote units.
Setup and Key Cutting
Before programming the remote functions, the included key blade must be cut to match your vehicle's original key. This process is typically performed by a professional locksmith or an automotive dealership.
- కీ కటింగ్: Take the new key fob and your original vehicle key to a qualified locksmith or dealership. They will cut the new key blade to match your existing key. This is essential for starting the vehicle.
- బ్యాటరీ ఇన్స్టాలేషన్: The remote comes with a CR2032 battery pre-installed. If replacement is needed, refer to the maintenance section.
Operating Instructions: Remote Programming
The KeylessOption LHJ011 remote control functions (lock, unlock, panic) are self-programmable for many compatible vehicles. Follow these step-by-step instructions carefully. It is recommended to program all new and existing remotes in a single session.
General Programming Procedure (Example for GM Vehicles, verify specific vehicle instructions):
- తయారీ: Gather all key fobs (new and existing) you wish to program. Ensure all vehicle doors are closed.
- ప్రోగ్రామింగ్ మోడ్ని నమోదు చేయండి:
- Sit in the driver's seat.
- పట్టుకోండి అన్లాక్ చేయండి button on the driver's side door panel.
- While holding the UNLOCK button, insert your newly cut key into the ignition.
- Cycle the ignition to the ON position (do not start the engine), then immediately to ఆఫ్, ఆపై తిరిగి ON, ఆపై కు ఆఫ్ మళ్ళీ.
- Release the UNLOCK button on the door panel. The vehicle's door locks should cycle (lock and unlock) to confirm that the vehicle is now in programming mode.
- Program Remote(s):
- Take the first remote you wish to program (e.g., for Driver 1).
- ఏకకాలంలో నొక్కి పట్టుకోండి లాక్ మరియు అన్లాక్ చేయండి రిమోట్లోని బటన్లు.
- Continue holding these buttons until the vehicle's door locks cycle again (this may take 15 to 30 seconds, or up to 100 seconds). This confirms the remote has been programmed.
- If you have additional remotes (e.g., for Driver 2), immediately repeat the previous step for each remaining remote. Do not exit programming mode between remotes.
- ప్రోగ్రామింగ్ మోడ్ నుండి నిష్క్రమించు:
- Once all remotes are programmed, turn the ignition key to the ON position, then to ఆఫ్.
- Open the driver's door. This action typically exits the programming mode.
- Test Remotes: Test all programmed remotes to ensure they function correctly (lock, unlock, panic). The first remote programmed will typically be assigned to Driver 1, and subsequent remotes to Driver 2, if your vehicle supports this feature.
గమనిక: Specific programming procedures may vary slightly by vehicle make and model. Always refer to your vehicle's owner's manual or the manufacturer's recommended programming instructions if these steps do not work.
నిర్వహణ
బ్యాటరీ భర్తీ
The KeylessOption LHJ011 remote uses one CR2032 coin cell battery. When the remote's range decreases or it stops responding, the battery may need replacement.
- Open the Fob Casing: Carefully pry open the remote's casing. There is usually a small notch on the side where you can insert a flat-head screwdriver or a coin to gently separate the two halves.
- పాత బ్యాటరీని తీసివేయండి: Note the orientation (+/-) of the existing CR2032 battery. Gently remove it.
- కొత్త బ్యాటరీని చొప్పించండి: Insert a new CR2032 battery with the positive (+) side facing the same direction as the old battery.
- మూసివేయి సిasing: Align the two halves of the fob casing ని బిగించి, అవి సురక్షితంగా స్థానంలోకి అతుక్కుపోయే వరకు వాటిని గట్టిగా నొక్కండి.
- పరీక్ష కార్యాచరణ: Test the remote's functions (lock, unlock) to ensure the new battery is working correctly.
గమనిక: స్థానిక నిబంధనల ప్రకారం పాత బ్యాటరీలను బాధ్యతాయుతంగా పారవేయండి.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| ప్రోగ్రామింగ్ తర్వాత రిమోట్ పనిచేయదు. | Incorrect programming steps, dead battery, or incompatible vehicle. |
|
| Key blade does not turn in ignition. | Key not cut correctly or damaged. |
|
| రిమోట్ పరిధి పేలవంగా ఉంది. | తక్కువ బ్యాటరీ లేదా పర్యావరణ జోక్యం. |
|
స్పెసిఫికేషన్లు
- మోడల్: ఎల్హెచ్జె011
- బ్రాండ్: కీలెస్ ఎంపిక
- తయారీదారు పార్ట్ నంబర్: కెపిటి4037
- OEM పార్ట్ నంబర్లు: 15132198, 15186200, 15186201, 15186203, 15186209, 21997127, 22730827, LHJ011, 10377295, 15132197
- బ్యాటరీ రకం: 1 x CR2032 (చేర్చబడింది)
- మెటీరియల్: ప్లాస్టిక్
- ఉత్పత్తి కొలతలు: సుమారు 4"L x 2"W
- వస్తువు బరువు: సుమారు 1.58 ఔన్సులు
- ఆటోమోటివ్ ఫిట్ రకం: వాహనం నిర్దిష్ట ఫిట్
- బటన్ల సంఖ్య: 2 (Lock, Unlock) + Panic
వారంటీ మరియు మద్దతు
Each KeylessOption product includes a warranty card. For specific warranty details, please refer to the included card or contact KeylessOption customer support. Technical support is available with each purchase to assist with programming or operational questions.
For further assistance, please visit the official KeylessOption store or contact their customer service department.
KeylessOption Store: స్టోర్ను సందర్శించండి