1. పరిచయం
The Anex Magdora 22 No. 59-5B is a compact multi-bit stubby screwdriver set designed for precision work in confined spaces. Its ultra-short bit attachment and ergonomic handle make it ideal for tasks where standard screwdrivers are too long. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your Anex Magdora 22 Stubby Driver Set.
2. భద్రతా సమాచారం
Always observe the following safety precautions when using hand tools:
- Wear appropriate personal protective equipment, such as safety glasses, to protect against flying debris.
- Ensure the correct bit size and type are used for the fastener to prevent damage to the fastener or the tool.
- Do not use the tool if it is damaged. Inspect the handle and bits before each use.
- Do not apply excessive force that could cause the tool to slip or break.
- Keep hands and fingers clear of the working area.
- Store the tool and bits in a dry, secure place, out of reach of children.
3. ప్యాకేజీ విషయాలు
The Anex Magdora 22 No. 59-5B Stubby Driver Set includes the following components:
- 1 x Handle Body
- 1 x Bicho Holder
- 5 x Ultra-short bits (including +1, +2 (2 pieces), +3, and -6)
Note: The total quantity of items in the set is 12 pieces, which includes the handle, holder, and bits.
This image displays the Anex Magdora 22 No. 59-5B Stubby Driver Set in its retail packaging. It highlights the compact handle, the included ultra-short bits (Phillips and Slotted), and the magnetic bit holder. The packaging also illustrates the tool's suitability for narrow spaces with dimensions of 22mm head width and 30mm bit length.
4. సెటప్
- సరైన బిట్ను ఎంచుకోండి: Identify the appropriate bit type and size (+1, +2, +3, or -6) for your fastener.
- బిట్ను చొప్పించండి: Firmly insert the selected bit into the Bicho holder. The magnetic holder will secure the bit in place.
- Attach to Handle: Insert the Bicho holder with the bit into the handle body. Ensure it is fully seated.
The compatible bit size for this tool is a single head bit with a 0.25 inch (6.35 mm) hex shaft and a total length of 0.75 inch (19 mm) or above.
5. ఆపరేటింగ్ సూచనలు
- సాధనాన్ని ఉంచండి: Place the tip of the bit into the head of the fastener.
- ఒత్తిడిని వర్తింపజేయండి: Apply firm, steady downward pressure on the handle to keep the bit engaged with the fastener.
- హ్యాండిల్ను తిప్పండి: Rotate the handle clockwise to tighten or counter-clockwise to loosen the fastener. The 4-groove handle design provides an easy grip for applying force.
- Working in Narrow Spaces: The ultra-short bit attachment and 22mm head width are specifically designed for accessing fasteners in tight or restricted areas.
- Magnetic Bit Retention: The magnetic feature of the Bicho holder helps prevent bits from falling out during use, especially when working overhead or in awkward positions.
6. నిర్వహణ
- శుభ్రపరచడం: Wipe the handle and bits with a clean, dry cloth after each use to remove dirt, grease, or debris. Do not use harsh chemicals or abrasive cleaners.
- తనిఖీ: Regularly inspect bits for wear, damage, or corrosion. Replace worn or damaged bits immediately to ensure optimal performance and safety.
- నిల్వ: Store the stubby driver set and its bits in a dry environment to prevent rust and corrosion. Keep them organized to easily find the correct bit for future tasks.
7. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Bit slips out of fastener head | Incorrect bit size/type; insufficient downward pressure; worn fastener head or bit. | Ensure correct bit is used. Apply more downward pressure. Replace worn bit or fastener. |
| Bit does not stay in holder | Bit not fully inserted; magnetic holder weakened; incompatible bit. | Push bit firmly into holder. Ensure bit is 0.25 inch hex. If magnetic holder is faulty, contact support. |
| Difficulty turning fastener | Fastener is seized or overtightened; incorrect bit size. | Apply penetrating oil if seized. Ensure correct bit size. Do not force, as this may damage the fastener or tool. |
8. స్పెసిఫికేషన్లు
- బ్రాండ్: అనెక్స్
- మోడల్ సంఖ్య: No.59-5B
- పార్ట్ నంబర్: No.59-5B
- వస్తువు బరువు: 1.03 పౌండ్లు
- ప్యాకేజీ కొలతలు: 7.17 x 5.98 x 2.99 అంగుళాలు
- శైలి: 12pcs
- ముక్కల సంఖ్య: 12
- అనుకూలమైన ఫాస్టెనర్ పరిధి: 0.25 inches (6.35mm hex shaft)
- వాడుక: Stubby
- బ్యాటరీలు అవసరమా?: నం
9. వారంటీ మరియు మద్దతు
వారంటీ సమాచారం లేదా సాంకేతిక మద్దతు కోసం, దయచేసి తయారీదారు అధికారిని చూడండి. webసైట్లో లేదా మీ రిటైలర్ను సంప్రదించండి. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదును ఉంచండి.
తయారీదారు: Anex Tools
Webసైట్: www.anextool.co.jp/en/ (ఉదాampలింక్, దయచేసి అధికారికంగా ధృవీకరించండి. webసైట్)
