సైఫర్‌ల్యాబ్ 1504B ఎంట్రీ లెవల్ 2D ఇమేజర్ యూజర్ మాన్యువల్

1. పరిచయం

This manual provides comprehensive instructions for the setup, operation, and maintenance of your CipherLab 1504B Entry Level 2D Imager. The CipherLab 1504B is a high-performance 2D barcode scanner designed for efficient data capture in various environments, including retail, healthcare, and logistics. It is capable of reading both 1D and 2D barcodes quickly and accurately.

మూర్తి 1: The CipherLab 1504B 2D Imager. This image displays the ergonomic design of the handheld scanner, featuring a trigger button and a scanning window at the front. The device is black with a yellow trigger accent.

2. సెటప్

2.1 అన్‌ప్యాకింగ్

ప్యాకేజింగ్ నుండి అన్ని భాగాలను జాగ్రత్తగా తొలగించండి. కింది అంశాలు ఉన్నాయని నిర్ధారించుకోండి:

• CipherLab 1504B 2D Imager
• USB కేబుల్
• త్వరిత ప్రారంభ మార్గదర్శి (చేర్చబడి ఉంటే)

2.2 పరికరాన్ని కనెక్ట్ చేస్తోంది

1. Locate an available USB port on your host computer.
2. Connect the smaller end of the USB cable to the port at the base of the CipherLab 1504B imager.
3. Connect the larger end of the USB cable to the USB port on your computer.
4. The imager will power on automatically. Most operating systems will detect the device as a standard HID keyboard device and install necessary drivers automatically.

2.3 ప్రారంభ కాన్ఫిగరేషన్

The CipherLab 1504B is typically configured for standard operation out of the box. For specific settings or advanced configurations (e.g., changing symbologies, adding prefixes/suffixes), refer to the full programming manual or scan configuration barcodes provided by CipherLab. These barcodes are usually found in a separate programming guide.

3. ఆపరేటింగ్ సూచనలు

3.1 ప్రాథమిక స్కానింగ్ విధానం

1. Ensure the imager is properly connected to your computer and powered on.
2. Open an application where you wish to input scanned data (e.g., a text editor, spreadsheet, or POS software).
3. Point the scanning window of the imager at the barcode you wish to scan.
4. Press and hold the trigger button. A red aiming beam will appear.
5. బార్‌కోడ్‌పై గురిపెట్టే పుంజాన్ని మధ్యలో ఉంచండి.
6. Once the barcode is successfully read, the imager will emit a short beep and the LED indicator will flash green. The data will then be transmitted to your computer as if typed from a keyboard.
7. ట్రిగ్గర్ బటన్‌ను విడుదల చేయండి.

3.2 Indicator Lights and Sounds

• Green LED Flash & Short Beep: Successful scan.
• Red LED (Steady): Imager is powered on and ready.
• No LED / No Power: USB కనెక్షన్‌ను తనిఖీ చేయండి.

4. నిర్వహణ

4.1 Cleaning the Imager

To ensure optimal performance, keep the scanning window clean. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaner. Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the device.

4.2 నిల్వ

Store the imager in a cool, dry place away from direct sunlight and extreme temperatures. Protect it from drops and impacts when not in use.

5. ట్రబుల్షూటింగ్

6. స్పెసిఫికేషన్లు

• మోడల్ సంఖ్య: A1504B2BSU001
• ఉత్పత్తి కొలతలు: 10 x 2 x 2.7 అంగుళాలు
• వస్తువు బరువు: 7 ఔన్సులు
• కనెక్టివిటీ: USB
• స్కానర్ రకం: 2D ఇమేజర్

7. వారంటీ మరియు మద్దతు

Information regarding product warranty and technical support is typically provided in a separate warranty card or can be found on the official CipherLab website. Please refer to these resources for detailed warranty terms, registration, and contact information for technical assistance.