1. పరిచయం
This manual provides detailed instructions for the safe and effective operation of the Siglent Technologies SDS1052DL+ Digital Storage Oscilloscope and the SDG1032X Arbitrary Waveform Function Generator. Please read this manual thoroughly before using the instruments to ensure proper functionality and to prevent damage.
Figure 1: Siglent SDS1052DL+ Oscilloscope (left) and SDG1032X Function Generator (right)
This image displays the Siglent SDS1052DL+ Digital Storage Oscilloscope on the left and the Siglent SDG1032X Arbitrary Waveform Function Generator on the right, presented as a complete bundle.
2. భద్రతా సమాచారం
Always observe the following safety precautions to prevent injury and damage to the instruments:
- విద్యుత్ సరఫరా వాల్యూమ్ నిర్ధారించుకోండిtage పరికరం యొక్క అవసరాలకు సరిపోతుంది.
- తడి లేదా డిలో ఆపరేట్ చేయవద్దుamp పరిస్థితులు.
- పరికరాన్ని తెరవవద్దు casing; అర్హత కలిగిన సిబ్బందికి సర్వీసింగ్ను సూచించండి.
- Use only specified probes and accessories.
- శుభ్రపరిచే ముందు పవర్ డిస్కనెక్ట్ చేయండి.
3. సెటప్
3.1 SDS1052DL+ Oscilloscope Setup
- పవర్ కనెక్షన్: Connect the provided power cord to the oscilloscope's power input and then to a grounded AC power outlet.
- ప్రోబ్ కనెక్షన్: Connect the oscilloscope probes to the BNC input channels (CH1, CH2) on the front panel. Ensure a secure connection.
- గ్రౌండింగ్: Attach the probe's ground clip to the circuit's ground point.
- పవర్ ఆన్: Press the power button on the front panel. The oscilloscope will perform a self-test and display the boot screen.
- ప్రారంభ క్రమాంకనం: For accurate measurements, perform probe compensation as described in the full user manual.
Figure 2: Front panel of the SDS1052DL+ Oscilloscope
This image shows the front panel of the Siglent SDS1052DL+ Digital Storage Oscilloscope, highlighting the display, control knobs, and input connectors.
3.2 SDG1032X Function Generator Setup
- పవర్ కనెక్షన్: Connect the provided power cord to the function generator's power input and then to a grounded AC power outlet.
- అవుట్పుట్ కనెక్షన్: Connect the desired output channel (CH1 or CH2) to your circuit using a BNC cable.
- పవర్ ఆన్: Press the power button on the front panel. The function generator will initialize.
Figure 3: Front panel of the SDG1032X Function Generator
This image displays the front panel of the Siglent SDG1032X Arbitrary Waveform Function Generator, showing its display, keypad, and output connectors.
4. ఆపరేషన్
4.1 SDS1052DL+ Oscilloscope Operation
The SDS1052DL+ features a high-resolution LCD display and intuitive controls for signal analysis.
- Vertical Controls: వాల్యూమ్ సర్దుబాటుtage per division (V/div) and vertical position for each channel.
- క్షితిజ సమాంతర నియంత్రణలు: Adjust time per division (s/div) and horizontal position.
- ట్రిగ్గర్ సిస్టమ్: Use the trigger controls to stabilize waveforms. Adjust trigger level, mode (Auto, Normal, Single), and source.
- కొలతలు: Access automatic measurements (e.g., Vpp, Vrms, Frequency, Period) via the "Measure" menu. Cursors are available for manual measurements.
- గణిత విధులు: The oscilloscope includes math functions such as addition, subtraction, multiplication, division, and Fast Fourier Transform (FFT) for frequency domain analysis.
- కనెక్టివిటీ: Utilize the USB host port for saving waveforms and screenshots, and the LAN interface for remote control and data transfer.
Figure 4: SDS1052DL+ Oscilloscope displaying FFT analysis
This image shows the Siglent SDS1052DL+ Oscilloscope with its display showing a waveform and a Fast Fourier Transform (FFT) analysis, demonstrating its advanced measurement capabilities.
4.2 SDG1032X Function Generator Operation
The SDG1032X offers versatile waveform generation capabilities up to 30 MHz.
- తరంగ రూప ఎంపిక: Choose from standard waveforms (sine, square, ramp, pulse, noise) and arbitrary waveforms.
- Frequency Setting: Use the keypad or rotary knob to set the output frequency. Square waves can be generated up to 30 MHz.
- Amplitude and Offset: Adjust the peak-to-peak amplitude and DC offset of the output signal.
- మాడ్యులేషన్: Supports various modulation types including AM, FM, PM, FSK, and ASK.
- Dual Channel Output: Both CH1 and CH2 can operate independently or be linked. Phase offset between channels is adjustable.
- Sweep and Burst Modes: Configure sweep functions for frequency or amplitude, and burst modes for generating a specific number of cycles.
- Harmonics Generation: Utilize the harmonics generation mode for specific testing requirements.
Figure 5: SDG1032X Function Generator displaying modulation settings
This image shows the Siglent SDG1032X Function Generator's display, illustrating the settings for amplitude modulation (AM Depth and AM Freq) and other waveform parameters.
5. నిర్వహణ
- శుభ్రపరచడం: Use a soft, dry cloth to clean the instrument's exterior. For stubborn dirt, a lightly dampened cloth with mild detergent may be used. Ensure no liquid enters the instrument.
- నిల్వ: Store the instruments in a dry, dust-free environment away from direct sunlight and extreme temperatures.
- క్రమాంకనం: Periodic calibration by qualified service personnel is recommended to maintain measurement accuracy.
- సాఫ్ట్వేర్ అప్డేట్లు: తయారీదారుని తనిఖీ చేయండి webసరైన పనితీరును మరియు కొత్త ఫీచర్లకు యాక్సెస్ను నిర్ధారించడానికి ఫర్మ్వేర్ అప్డేట్ల కోసం సైట్.
6. ట్రబుల్షూటింగ్
ఈ విభాగం మీరు ఎదుర్కొనే సాధారణ సమస్యలను పరిష్కరిస్తుంది.
- Instrument Does Not Power On:
- Verify the power cord is securely connected to both the instrument and the power outlet.
- కార్యాచరణ కోసం పవర్ అవుట్లెట్ని తనిఖీ చేయండి.
- పవర్ స్విచ్ "ఆన్" స్థానంలో ఉందని నిర్ధారించుకోండి.
- SDS1052DL+ Stuck on Logo Screen:
- Disconnect the power cord for at least one minute, then reconnect and attempt to power on again.
- If the issue persists, contact Siglent customer support.
- Unstable Waveform Display on SDS1052DL+:
- Adjust the trigger level and trigger mode (e.g., to "Auto" or "Normal").
- Ensure probes are properly compensated and securely connected.
- Check for external noise sources affecting the signal.
- No Output from SDG1032X:
- Ensure the "Output" button for the selected channel is illuminated, indicating the output is enabled.
- Verify the BNC cable connection to the circuit.
- Check frequency and amplitude settings to ensure they are within valid ranges.
7. స్పెసిఫికేషన్లు
7.1 SDS1052DL+ Digital Storage Oscilloscope
- బ్యాండ్విడ్త్: 50 MHz
- ఛానెల్లు: 2
- రియల్ టైమ్ ఎస్ampలే రేటు: 500 MSa/s
- ప్రదర్శన: హై-రిజల్యూషన్ LCD
- కనెక్టివిటీ: USB Host, LAN
- ఫీచర్లు: Cursors, Math functions (including FFT), Built-in Frequency Counter, Automatic Measurements, Advanced Triggers.
7.2 SDG1032X Arbitrary Waveform Function Generator
- ఫ్రీక్వెన్సీ పరిధి: Up to 30 MHz (Square waves up to 30 MHz)
- ఛానెల్లు: 2 (Dual Channel Output)
- తరంగ రూపాలు: సైన్, స్క్వేర్, ఆర్amp, Pulse, Noise, Arbitrary
- మాడ్యులేషన్ రకాలు: AM, FM, PM, FSK, ASK
- ఫీచర్లు: Sweep, Burst, Harmonics Generation Mode, Adjustable Phase Offset between CH1 and CH2, Built-in Frequency Counter.
8. వారంటీ మరియు మద్దతు
Siglent Technologies provides a warranty for its products. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Siglent Technologies website. For technical support, service, or inquiries, please contact Siglent customer service through their official channels.
గమనిక: అనధికార మరమ్మతులు లేదా మార్పులు ఉత్పత్తి వారంటీని రద్దు చేయవచ్చు.
