1. పరిచయం
This manual provides detailed instructions for the installation, operation, and maintenance of your Knightsbridge IP44 180° Mini PIR Sensor, Model OS0014. This passive infrared (PIR) sensor is designed to detect motion and automatically control connected lighting or other devices, offering convenience and energy efficiency. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. భద్రతా సమాచారం
- Installation must be carried out by a qualified electrician in accordance with national wiring regulations.
- ఏదైనా సంస్థాపన లేదా నిర్వహణ పనిని ప్రారంభించే ముందు ప్రధాన విద్యుత్ సరఫరా స్విచ్ ఆఫ్ చేయబడిందని నిర్ధారించుకోండి.
- This product is rated IP44, making it suitable for outdoor use where protection against splashing water is required.
- Do not exceed the maximum load ratings specified for this device.
- Keep the sensor lens clean and free from obstructions to ensure optimal performance.
3. ఉత్పత్తి ముగిసిందిview
The Knightsbridge OS0014 is a compact, white, wall-mountable or ceiling-mountable PIR sensor. It features a 180° detection angle and adjustable settings for time delay and light sensitivity (LUX).
చిత్రం 1: ముందు-కోణం view of the Knightsbridge IP44 Mini PIR Sensor.
చిత్రం 2: డైరెక్ట్ ఫ్రంట్ view of the sensor, highlighting the detection lens.
మూర్తి 3: వైపు view of the sensor, illustrating its compact design and wall mounting bracket.
చిత్రం 4: దిగువ view of the sensor, showing the 'TIME' and 'LUX' adjustment dials.
4. సంస్థాపన మరియు సెటప్
4.1 మౌంటు స్థానం
Choose a suitable location for mounting the sensor. It can be wall-mounted or ceiling-mounted. For optimal performance, consider the following:
- Avoid mounting near heat sources (e.g., air conditioning vents, heaters) that could cause false triggers.
- గుర్తింపు ప్రాంతం పెద్ద అడ్డంకులు లేకుండా చూసుకోండి.
- Mount at a height that allows for effective detection within the 4-meter range and 180° angle.
4.2 వైరింగ్
హెచ్చరిక: Electrical installation should only be performed by a qualified electrician.
- Switch off the main power supply at the consumer unit.
- Carefully open the sensor housing to access the wiring terminals.
- Connect the live, neutral, and switched live wires according to the wiring diagram provided inside the sensor or on its packaging.
- Ensure all connections are secure and correctly insulated.
- Close the sensor housing securely, ensuring the IP44 rating is maintained.
5. ఆపరేటింగ్ సూచనలు
After installation and power restoration, the sensor will enter a warm-up period (typically 30-60 seconds) during which it may cycle on and off. Once warmed up, you can adjust the settings using the dials located on the sensor (refer to Figure 4).
5.1 TIME Adjustment
The 'TIME' dial controls how long the connected light or device remains on after motion is detected and then ceases. The adjustable range is approximately 10 seconds to 15 minutes. Rotate the dial clockwise to increase the duration and counter-clockwise to decrease it.
5.2 LUX Adjustment
The 'LUX' dial determines the ambient light level at which the sensor will activate. This allows the sensor to operate only when it is dark enough. The adjustable range is approximately 3 LUX (dark) to 300 LUX (daylight). Rotate the dial towards the 'sun' symbol for activation in brighter conditions or towards the 'moon' symbol for activation only in darker conditions.
ఆటోమేటిక్ ఆపరేషన్: Once configured, the sensor will automatically detect motion within its 180° field of view and 4-meter range, activating the connected load according to the set TIME and LUX levels.
6. నిర్వహణ
The Knightsbridge Mini PIR Sensor requires minimal maintenance. To ensure continued optimal performance:
- సెన్సార్ లెన్స్ను క్రమానుగతంగా మృదువైన, డి-క్లాసర్తో శుభ్రం చేయండి.amp cloth to remove dust, dirt, or debris that may obstruct detection. Do not use abrasive cleaners.
- Ensure the sensor is free from physical damage.
7. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Sensor does not activate. | No power; LUX setting too high; TIME setting too low; obstructed sensor. | Check power supply; adjust LUX dial towards 'moon'; adjust TIME dial; clear obstructions from sensor lens. |
| కాంతి నిరంతరం వెలుగుతూనే ఉంటుంది. | Constant motion in detection area; wiring error; sensor fault. | Ensure no continuous motion; verify wiring connections; if problem persists, consult a qualified electrician. |
| Sensor activates without apparent motion. | Heat sources; small animals; strong air currents; sensor fault. | Relocate sensor away from heat sources or drafts; adjust detection angle if possible; if problem persists, consult a qualified electrician. |
| Detection range is poor. | Incorrect mounting height; obstructions; extreme temperatures. | Verify mounting height; remove obstructions; ensure operating within specified temperature range. |
8. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | OS0014 |
| బ్రాండ్ | నైట్స్బ్రిడ్జ్ |
| రంగు | తెలుపు |
| శక్తి మూలం | AC |
| వస్తువు బరువు | 0.1 కిలోగ్రాములు (సుమారు 3.52 ఔన్సులు) |
| గరిష్ట గుర్తింపు పరిధి | 4 మీటర్లు |
| డిటెక్షన్ యాంగిల్ | 180° |
| మౌంటు రకం | వాల్ మౌంట్ / సీలింగ్ మౌంట్ |
| ఉత్పత్తి కొలతలు (D x W x H) | 2.76" x 3.05" x 2.13" |
| మెటీరియల్ | పాలికార్బోనేట్ |
| ప్రత్యేక లక్షణాలు | Adjustable (TIME and LUX) |
| IP రేటింగ్ | IP44 |
| స్విచింగ్ కెపాసిటీ | Max. 2000W Incandescent / Max. 1000W LED |
| బ్యాటరీలు అవసరమా? | నం |
9. వారంటీ మరియు మద్దతు
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Knightsbridge customer service directly. Keep your proof of purchase for any warranty claims.