1. పరిచయం
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Geberit AP116 External Cistern. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
ఉత్పత్తి ముగిసిందిview
The Geberit AP116 is a high-quality external cistern designed for low-position toilet installations. It features a dual-flush system for water efficiency, silent refilling, and insulation against condensation. Its versatile design allows for lateral or central rear water connection.
మూర్తి 1: ముందు view of the Geberit AP116 External Cistern. This image shows the white, compact design of the cistern with its outlet pipe extending downwards.
2. భద్రతా సూచనలు
Always adhere to the following safety guidelines to prevent injury and damage to the product:
- మీకు ఏవైనా దశల గురించి ఖచ్చితంగా తెలియకపోతే, అర్హత కలిగిన నిపుణుడిచే ఇన్స్టాలేషన్ నిర్వహించబడాలి.
- ఏదైనా సంస్థాపన లేదా నిర్వహణ పనిని ప్రారంభించే ముందు నీటి సరఫరా ఆపివేయబడిందని నిర్ధారించుకోండి.
- Do not use abrasive cleaners or solvents on the cistern surface.
- Verify all connections are watertight before restoring water supply.
- This product is designed for low-position installation only. Do not attempt to install it in a high-level configuration.
3. ప్యాకేజీ విషయాలు
Please check that all components are present before starting installation:
- Geberit AP116 External Cistern (Model 136.432.11.1)
- 3/8" Stopcock
- Curved copper pipe
- 90° flush bend in ABS (Ø 50/44 mm, 23 x 23 cm)
- EPDM clamp (Ø 44/55 mm)
- Fixing material (screws, wall plugs, etc.)
గమనిక: The package weight is approximately 2.8 kg. Package dimensions are 14.0 L x 47.0 H x 36.5 W (centimeters).
4. ఇన్స్టాలేషన్ సూచనలు
This section outlines the general steps for installing the Geberit AP116 external cistern. Refer to the detailed technical drawings for precise measurements and connection points.
4.1. తయారీ
- టాయిలెట్ ప్రాంతానికి ప్రధాన నీటి సరఫరాను ఆపివేయండి.
- Drain any remaining water from the existing toilet system.
- Ensure the installation surface is clean, dry, and structurally sound.
4.2. Mounting the Cistern
- Position the cistern on the wall above the toilet bowl, ensuring it is level and at the correct height for low-position installation. Refer to Figure 3 and Figure 4 for recommended dimensions.
- Mark the drilling points for the fixing material.
- రంధ్రాలు చేసి తగిన గోడ ప్లగ్లను చొప్పించండి.
- Secure the cistern to the wall using the provided fixing material.
4.3. నీటి కనెక్షన్
- Connect the 3/8" stopcock to the water supply line. The cistern supports lateral (left/right) or central rear water connection.
- Connect the stopcock to the cistern's inlet using the curved copper pipe. Ensure all connections are sealed properly to prevent leaks.
4.4. Toilet Bowl Connection
- Attach the 90° flush bend (Ø 50/44 mm) to the cistern's outlet.
- Connect the flush bend to the toilet bowl's inlet, using the EPDM clamp (Ø 44/55 mm) to ensure a secure and watertight seal.
మూర్తి 2: Technical drawing illustrating the properties, technical data, and supplied materials for the Geberit AP116 cistern. This includes details on dynamic pressure, noise levels, temperature limits, flush volumes, and material composition.
మూర్తి 3: వైపు view technical drawing of the Geberit AP116 cistern, showing critical dimensions for installation, including height, depth, and connection points relative to the toilet bowl.
మూర్తి 4: ముందు view technical drawing of the Geberit AP116 cistern, detailing width, water inlet position (R 3/8), and overall height dimensions for proper placement.
5. ఆపరేటింగ్ సూచనలు
The Geberit AP116 cistern features a dual-flush mechanism for efficient water usage.
5.1. Initial Fill and Test
- Once installation is complete and all connections are secure, slowly turn on the main water supply.
- Allow the cistern to fill completely. The silent refilling mechanism will ensure a quiet operation.
- Check for any leaks around the connections. If leaks are detected, turn off the water supply and re-tighten connections.
5.2. Dual Flush Operation
The cistern offers two flush volumes:
- పూర్తి ఫ్లష్: For larger waste, press and hold the flush button for a longer duration. This activates the 6-7.5 liter flush.
- తగ్గిన ఫ్లష్: For liquid waste, press and release the flush button quickly. This activates the 3-4 liter flush.
5.3. Adjusting Flush Volume
The flush volumes are pre-set to 6 liters (full) and 3-4 liters (reduced). If adjustment is required, consult a qualified plumber. Adjustments typically involve internal mechanisms and should be handled with care to maintain optimal performance and water efficiency.
6. నిర్వహణ మరియు సంరక్షణ
Regular maintenance ensures the longevity and efficient operation of your Geberit AP116 cistern.
6.1. శుభ్రపరచడం
- Clean the exterior of the cistern with a soft cloth and mild, non-abrasive cleaning agents.
- Do not use harsh chemicals, abrasive pads, or solvents, as these can damage the surface finish.
6.2. Internal Component Check
- Periodically inspect the internal components (fill valve, flush valve) for wear or mineral buildup.
- If excessive mineral buildup is observed, turn off the water supply and clean components as necessary. Replacement parts are available if components are worn beyond repair.
6.3. సంక్షేపణం
The cistern is insulated against condensation. If condensation occurs, ensure proper ventilation in the bathroom and check for extreme temperature differences between the water supply and ambient air.
7. ట్రబుల్షూటింగ్
This section addresses common issues you might encounter with your Geberit AP116 cistern.
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Cistern not filling or filling slowly. | Water supply turned off; clogged fill valve; low water pressure. | Check water supply valve; clean or replace fill valve; check household water pressure. |
| Cistern continuously running. | Faulty flush valve seal; fill valve not shutting off properly; float arm obstruction. | Inspect and clean/replace flush valve seal; adjust or replace fill valve; clear any obstructions around the float arm. |
| Weak flush. | Incorrect flush volume setting; partial obstruction in flush bend; low water level. | Adjust flush volume (consult professional); check and clear flush bend; ensure cistern fills to correct level. |
| కనెక్షన్ల నుండి లీక్లు. | వదులైన కనెక్షన్లు; దెబ్బతిన్న సీల్స్. | Turn off water, tighten connections; replace damaged seals. |
If you are unable to resolve an issue using these troubleshooting steps, please contact a qualified plumber or Geberit customer support.
8. సాంకేతిక లక్షణాలు
| ఫీచర్ | వివరాలు |
|---|---|
| బ్రాండ్ | గెబెరిట్ |
| మోడల్ సంఖ్య | 136.432.11.1 (AP116) |
| సంస్థాపన రకం | Low-position external cistern |
| ఫ్లష్ సిస్టమ్ | ద్వంద్వ ఫ్లష్ |
| Pre-set Flush Volume | 6 లీటర్లు |
| Adjustable Full Flush Volume | 6 - 7.5 liters |
| Adjustable Reduced Flush Volume | 3 - 4 liters |
| నీటి కనెక్షన్ | Lateral (left/right) or central rear |
| డైనమిక్ ప్రెజర్ | 0.5 - 10 bar |
| Noise Level (at 3 bar) | 17 dB(A) |
| Max. Storage Temperature | 40°C |
| గరిష్టంగా నీటి ఉష్ణోగ్రత | 25°C |
| మెటీరియల్ | ABS |
| ఇన్సులేషన్ | Against condensation |
| ప్యాకేజీ కొలతలు | 47 x 36.5 x 14 సెం.మీ |
| ప్యాకేజీ బరువు | 3 కిలోలు (సుమారు 6.61 పౌండ్లు) |
| ASIN | B06XW33PFF |
| మొదటి తేదీ అందుబాటులో ఉంది | ఏప్రిల్ 21, 2022 |
9. వారంటీ మరియు మద్దతు
9.1. వారంటీ సమాచారం
Geberit products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your region, please refer to the official Geberit webమీ స్థానిక పంపిణీదారుని సంప్రదించండి లేదా వారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
9.2. కస్టమర్ మద్దతు
For technical assistance, spare parts, or further inquiries, please visit the official Geberit website or contact their customer service department. Contact details can typically be found on the Geberit website under the "Support" or "Contact Us" sections.
గమనిక: Information regarding spare parts availability for this specific model is currently unavailable through general product listings. Please contact Geberit directly for spare parts inquiries.
