BLS T01L LED Closet Light User Manual

1. పరిచయం

The BLS T01L LED Closet Light is a versatile, motion-sensing lighting solution designed for various indoor applications. It features 20 super bright LEDs, offering 180 lumens of soft white light. This light can be powered by 3 AA batteries for wireless operation or via a 5V USB DC input for constant lighting. Its adjustable light beam and motion sensor provide customizable illumination and detection.

Image 1.1: The BLS T01L LED Closet Light, a 14-inch white light bar with a central motion sensor.

2. పెట్టెలో ఏముంది

Please verify that all components are present upon opening the package:

• 1 x BLS Under Cabinet Light (Model T01L)
• 1 x DC కేబుల్
• 2 x 3M అంటుకునే టేపులు
• 1 x ఇన్స్ట్రక్షన్ మాన్యువల్ (ఈ డాక్యుమెంట్)

Image 2.1: The BLS T01L LED Closet Light shown with its packaging, DC cable, and mounting accessories.

3. స్పెసిఫికేషన్లు

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps to set up your BLS T01L LED Closet Light:

4.1. పరికరాన్ని శక్తివంతం చేయడం

The light can be powered by 3 AA batteries or a 5V USB DC input.

1. బ్యాటరీ ఇన్‌స్టాలేషన్:
   • లైట్ వెనుక భాగంలో బ్యాటరీ కంపార్ట్‌మెంట్‌ను గుర్తించండి.
   • Gently push to open the center part of the battery compartment cover.
   • Insert three AA batteries (not included). One battery slides into the hole on the left, the second into the hole on the right, and the third goes into the open center between the first two. Ensure correct polarity (+/-).
   • బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.
2. USB DC Power:
   • Connect the provided DC cable to the light's DC input port.
   • Plug the other end of the DC cable into a 5V USB power source (e.g., USB wall adapter, power bank).
   • గమనిక: If using USB DC power, it is recommended to remove the AA batteries to prevent potential issues or unnecessary battery drain.

Image 4.1: Diagram illustrating the 14-inch length of the light and its power options: 3 AA batteries or USB cable.

4.2. కాంతిని అమర్చడం

The BLS T01L offers multiple installation options:

• అంటుకునే మౌంటు: Peel the backing from the 3M adhesive tapes and firmly press the light onto a clean, dry surface.
• స్క్రూ మౌంటు: Use the provided screws to secure the light to the desired surface. This method offers a more permanent installation.

The light can be mounted either horizontally or vertically, depending on your application needs.

Image 4.2: Diagram showing horizontal and vertical installation options using screws or 3M adhesive stickers.

5. ఆపరేటింగ్ సూచనలు

5.1. మోడ్ ఎంపిక

The light features a slide switch with three modes:

• ఆటో మోడ్: The light will automatically turn on when motion is detected within 10 feet in a dark environment. It will remain on for 20 seconds after motion ceases. The built-in light sensor ensures it only activates when ambient light is low (e.g., at night).
• మోడ్‌లో: కదలిక లేదా పరిసర కాంతి పరిస్థితులతో సంబంధం లేకుండా లైట్ నిరంతరం వెలుగుతూనే ఉంటుంది.
• ఆఫ్ మోడ్: లైట్ ఆరిపోతుంది.

5.2. Adjusting Motion Sensor Sensitivity

The motion sensor can be adjusted to modify its detection sensitivity and range:

• The motion sensor module is designed to swivel. Gently rotate the sensor to adjust its detection angle.
• This allows you to fine-tune the area where motion is detected, preventing unwanted activations.

Image 5.1: Illustration of how to adjust the motion sensor to control sensitivity.

5.3. Adjusting Light Beam Angle

The entire light fixture can be adjusted to direct the light beam as desired:

• The light is mounted on a bracket that allows it to swivel.
• Gently pivot the light to achieve the desired illumination angle (e.g., 90°, 120°, 180°).

చిత్రం 5.2: ఉదాamples of adjustable light beam angles (90°, 120°, 180°) for optimal illumination.

6. నిర్వహణ

6.1. బ్యాటరీ భర్తీ

When the light output diminishes or the motion sensor becomes less responsive, it may be time to replace the batteries.

1. విభాగం 4.1లో వివరించిన విధంగా బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను తెరవండి.
2. పాత AA బ్యాటరీలను తొలగించండి.
3. Insert three new AA batteries, ensuring correct polarity.
4. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను మూసివేయండి.

గమనిక: For optimal performance and to avoid frequent battery changes, consider using high-quality alkaline or rechargeable AA batteries. If using the USB DC power option, remove the AA batteries.

6.2. శుభ్రపరచడం

To maintain the appearance and functionality of your light:

• Ensure the light is in the OFF position or disconnected from power before cleaning.
• మృదువైన, పొడి వస్త్రంతో ఉపరితలాన్ని తుడవండి.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.

7. ట్రబుల్షూటింగ్

If you encounter issues with your BLS T01L LED Closet Light, refer to the following common problems and solutions:

8. వారంటీ సమాచారం

The BLS T01L LED Closet Light comes with an extended warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact BLS customer support.

9. కస్టమర్ మద్దతు

If you have any questions, require technical assistance, or need further support, please contact BLS customer service through the following channels:

• ఇమెయిల్: Refer to your product packaging or the official BLS website for the most current contact email.
• Webసైట్: Visit the official BLS webతరచుగా అడిగే ప్రశ్నలు మరియు మద్దతు వనరుల కోసం సైట్.
• అమెజాన్ స్టోర్: మీరు కూడా సందర్శించవచ్చు BLS Store on Amazon ఉత్పత్తి సమాచారం మరియు విక్రేత సంప్రదింపు ఎంపికల కోసం.