1. ఉత్పత్తి ముగిసిందిview
The Vimar 14135.1 is a universal dimmer operating at 230 V~ 50 Hz with phase-cut dimming. It is designed for use with incandescent lamps (40-400 W), electronic transformers (40-300 VA), CFL lamps (10-200 W), and LED lamps and electronic LED transformers (3-200 W). It features ON/OFF control and dimming via an integrated push-button or from multiple locations using normally open (NO) push-buttons. It includes a MASTER function for model 14137, minimum brightness adjustment, and dark location identification. This product is not suitable for Isoset enclosures and comes in white.
Figure 1: Vimar 14135.1 Universal Dimmer
2 కీ ఫీచర్లు
- Universal dimmer for various lamp types: incandescent, electronic transformers, CFL, and LED.
- Supports 230 V~ 50 Hz phase-cut dimming.
- ON/OFF control and dimming via integrated push-button or external NO push-buttons.
- Includes a MASTER function for use with model 14137.
- Adjustable minimum brightness setting.
- Easily identifiable in the dark thanks to an integrated LED light.
- Modular series suitable for both wall and flush mounting, compatible with Plana civil series components.
3. భద్రతా సమాచారం
హెచ్చరిక: Electrical installation should only be performed by qualified personnel in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installing, servicing, or removing the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.
ఉత్పత్తిని దాని పేర్కొన్న వాల్యూమ్ లోపల ఉపయోగించారని నిర్ధారించుకోండిtage and load limits. Do not use if the product appears damaged.
4. సంస్థాపన
4.1 సాధారణ ఇన్స్టాలేషన్ మార్గదర్శకాలు
The Vimar 14135.1 dimmer is part of a modular system designed for wall and flush mounting. For proper installation, it is essential to combine the dimmer with dedicated supports and plates from the same Vimar civil series, such as the Plana series. This modularity allows for flexible configurations to meet specific room requirements.
చిత్రం 2: ఉదాample of Vimar modularity with support, sockets, and plate.
4.2. వైరింగ్
Connect the dimmer according to the wiring diagram provided with the product packaging. Ensure all connections are secure and comply with electrical safety standards. The dimmer uses screw terminals for connections.
గమనిక: This dimmer is designed for phase-cut operation. Verify compatibility with your lighting loads before installation.
5. ఆపరేటింగ్ సూచనలు
5.1. Basic Operation (ON/OFF and Dimming)
The Vimar 14135.1 dimmer can be controlled using its integrated push-button or via external normally open (NO) push-buttons connected to the system.
- ఆన్/ఆఫ్ చేయడానికి: Briefly press the push-button.
- To Dim (Adjust Brightness): Press and hold the push-button. The light level will gradually increase or decrease. Release the button when the desired brightness is reached.
5.2. Minimum Brightness Adjustment
The dimmer allows for adjustment of the minimum brightness level. This feature is particularly useful for LED lamps to prevent flickering or ensure stable operation at low light levels. Refer to the detailed instructions provided with the product for the specific procedure to set the minimum brightness.
5.3. Dark Location Identification
The dimmer is equipped with an integrated LED light that makes it easily identifiable in the dark, enhancing user convenience in low-light conditions.
5.4. Master Function (for Model 14137)
This dimmer includes a MASTER function, allowing it to control other compatible Vimar dimmers, specifically model 14137, in a multi-point control setup. Consult the wiring diagrams for multi-point control configurations.
6. నిర్వహణ
The Vimar 14135.1 Universal Dimmer requires minimal maintenance. To clean the surface, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components. Ensure the device is disconnected from power before cleaning.
7. ట్రబుల్షూటింగ్
No specific troubleshooting steps are provided in the general product information. If you experience issues with your Vimar 14135.1 dimmer, ensure that:
- The power supply to the circuit is active.
- The dimmer is correctly wired according to the installation instructions.
- కనెక్ట్ చేయబడిన ఎల్amps or transformers are compatible with a phase-cut dimmer and within the specified load ranges.
For persistent problems, it is recommended to consult a qualified electrician or refer to the detailed technical documentation available on the Vimar support webసైట్.
8. సాంకేతిక లక్షణాలు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ సంఖ్య | 14135.1 |
| ఆపరేటింగ్ వాల్యూమ్tage | 230 V~ 50 Hz |
| ప్రకాశించే ఎల్amp లోడ్ చేయండి | 40-400 W |
| Electronic Transformer Load | 40-300 వి.ఐ. |
| CFL ఎల్amp లోడ్ చేయండి | 10-200 W |
| LED L.amp / Electronic LED Transformer Load | 3-200 W |
| రకం అస్పష్టత | దశ కట్ |
| నియంత్రణ రకం | Integrated push-button or external NO push-buttons |
| ఆపరేటింగ్ మోడ్ | మాన్యువల్ |
| ప్రస్తుత రేటింగ్ | 2.2 ఎ |
| మెటీరియల్ | ప్లాస్టిక్ |
| రంగు | తెలుపు |
| కొలతలు (L x W x H) | 9.5 x 12.75 x 1.62 సెం.మీ (3.74 x 5.02 x 0.64 అంగుళాలు) |
| బరువు | 50 గ్రాములు |
| సర్టిఫికేషన్ | IP40 |
| మూలం దేశం | ఇటలీ |
9. వారంటీ మరియు మద్దతు
Specific warranty information for the Vimar 14135.1 dimmer is not provided in the general product details. Please refer to your purchase documentation or contact Vimar directly for warranty terms and conditions.
For additional instructions, tutorials, and support, please visit the official Vimar support webసైట్:
