Powerhorse Single-Direction Plate Compactor

ఉత్పత్తి ముగిసిందిview

The Powerhorse Single-Direction Plate Compactor is engineered for efficient compaction of granular soils and crushed aggregate. This robust machine is powered by a 212cc OHV engine, delivering significant compaction force and travel speed for various landscaping and construction tasks.

Figure 1: Powerhorse Single-Direction Plate Compactor

ముఖ్య లక్షణాలు:

• Compaction Force: Delivers 3,950 lbs. of compaction force.
• నిమిషానికి వైబ్రేషన్స్ (VPM): Achieves 5,500 VPM for effective material consolidation.
• ప్రయాణ వేగం: Operates at a travel speed of 65 feet per minute.
• ఇంజిన్: Equipped with a 7 HP, 212cc OHV engine.
• కార్బ్యురేటర్: Features a float-type carburetor for uninterrupted operation.
• గవర్నర్: Centrifugal flyweight-type governor ensures consistent speed.
• తక్కువ ఆయిల్ షట్‌డౌన్: Automatically protects the engine from damage due to low oil levels.
• Air Ports: Side air ports limit the entry of debris into critical components.
• ప్లేట్ పరిమాణం: Heavy-duty steel compacting plate measures 21 1/2 inches by 17 7/10 inches.

1. సెటప్ మరియు అసెంబ్లీ

Before operating the compactor, ensure all components are properly assembled and checked. Refer to the detailed assembly instructions provided in the separate assembly guide for specific steps.

ప్రారంభ తనిఖీలు:

1. అన్‌ప్యాకింగ్: Carefully remove the compactor and all accessories from the packaging. Inspect for any shipping damage.
2. అసెంబ్లీని నిర్వహించండి: Attach the handle securely to the main unit using the provided hardware. Ensure all bolts are tightened to specification.
3. ద్రవ స్థాయిలు:
   • ఇంజిన్ ఆయిల్: Fill the engine crankcase with the recommended type and amount of engine oil. Do not overfill.
   • ఇంధనం: Fill the fuel tank with fresh, clean gasoline. Ensure the fuel cap is securely fastened.
4. ఎయిర్ ఫిల్టర్: Verify the air filter is clean and properly seated.
5. స్పార్క్ ప్లగ్: Check that the spark plug wire is securely connected.

Figure 2: Compactor with handle and engine detail

2. ఆపరేటింగ్ సూచనలు

Follow these steps for safe and effective operation of your Powerhorse Plate Compactor.

ఇంజిన్‌ను ప్రారంభించడం:

1. Ensure the compactor is on a level surface.
2. ఇంధన వాల్వ్ తెరవండి.
3. Move the choke lever to the 'CHOKE' position (if engine is cold).
4. Move the throttle lever to the 'FAST' position.
5. ఇంజిన్ ప్రారంభమయ్యే వరకు రీకోయిల్ స్టార్టర్ హ్యాండిల్‌ను గట్టిగా లాగండి.
6. ఇంజిన్ స్టార్ట్ అయిన తర్వాత, చౌక్ లివర్‌ను క్రమంగా 'RUN' స్థానానికి తరలించండి.

Compaction Procedure:

• Always wear appropriate personal protective equipment (PPE), including hearing protection, safety glasses, and sturdy footwear.
• Guide the compactor over the area to be compacted. The single-direction design means it moves forward.
• Overlap each pass by approximately 2-4 inches to ensure uniform compaction.
• For optimal results, make multiple passes over the same area. The compactor delivers 5,500 VPM and travels at 65 feet per minute, allowing for efficient coverage of up to 6,700 square feet per hour.
• The heavy-duty steel compacting plate (21.5" x 17.7") is designed to deliver 3,950 lbs. of compaction force.

Figure 3: Illustrates the significant compaction force of 3,950 lbs.

Figure 4: Highlights the high vibration rate of 5,500 VPM for effective compaction.

Figure 5: Demonstrates the efficient travel speed of 65 feet per minute.

ఇంజిన్‌ను ఆపడం:

1. Move the throttle lever to the 'STOP' or 'OFF' position.
2. ఇంధన వాల్వ్ మూసివేయండి.
3. Allow the engine to cool down before storage or further maintenance.

3. నిర్వహణ

Regular maintenance is crucial for the longevity and optimal performance of your Powerhorse Plate Compactor.

ఇంజిన్ నిర్వహణ:

• చమురు మార్పులు: Refer to the engine manual for recommended oil change intervals. Regularly check oil levels before each use. The low oil shutdown feature protects the engine from damage if oil levels drop too low.
• ఎయిర్ ఫిల్టర్ క్లీనింగ్: Clean or replace the air filter regularly, especially when operating in dusty conditions. The side air ports are designed to limit debris entry, but regular cleaning is still necessary.
• స్పార్క్ ప్లగ్: స్పార్క్ ప్లగ్‌ను క్రమానుగతంగా తనిఖీ చేసి శుభ్రం చేయండి. అరిగిపోయినా లేదా మురికిగా ఉన్నా దాన్ని మార్చండి.

Figure 6: The Low Oil Shutdown feature provides critical engine protection.

Compacting Plate and Belt Maintenance:

• శుభ్రపరచడం: After each use, clean any accumulated dirt or debris from the compacting plate and the underside of the unit.
• బెల్ట్ తనిఖీ: Periodically inspect the drive belt for wear, cracks, or damage. Replace if necessary. The sealed belt cover protects the clutch and belt.
• ఫాస్టెనర్లు: Check all nuts, bolts, and fasteners regularly and tighten as needed to ensure structural integrity.

4. ట్రబుల్షూటింగ్

ఈ విభాగం సాధారణ కార్యాచరణ సమస్యలకు పరిష్కారాలను అందిస్తుంది. ఇక్కడ జాబితా చేయని సమస్యల కోసం, కస్టమర్ మద్దతును సంప్రదించండి.

5. స్పెసిఫికేషన్లు

Detailed technical specifications for the Powerhorse Single-Direction Plate Compactor.

6. వారంటీ మరియు మద్దతు

For warranty information, please refer to the documentation included with your purchase or visit the official Powerhorse website. Powerhorse products are built for durability and dependability.

కస్టమర్ మద్దతు:

If you require assistance, have questions, or need to order replacement parts, please contact Powerhorse customer support. You can also visit the Powerhorse Store on Amazon మరిన్ని ఉత్పత్తి సమాచారం మరియు వనరుల కోసం.

Additional protection plans may be available for purchase to extend coverage beyond the standard warranty. Please check the product listing or contact your retailer for details on 2-Year, 3-Year, or Complete Protect plans.