1. ఉత్పత్తి ముగిసిందిview
The Genasun GV-10-Li-14.2V is a high-performance Maximum Power Point Tracking (MPPT) solar charge controller designed specifically for 4S Lithium Iron Phosphate (LiFePO4) batteries. It efficiently converts solar panel power to charge your battery system, ensuring optimal performance and longevity.
చిత్రం 1.1: ముందు view of the Genasun GV-10-Li-14.2V MPPT Charge Controller, showing the model name, battery type, charging current, and LED indicators.
ముఖ్య లక్షణాలు:
- ఆప్టిమైజ్ చేసిన ఛార్జింగ్: Max. recommended panel power 140 W, 10.5 A charging current, charge profile CC/CV at 14.2 V for 4S LiFePO4 (3.55 V per cell).
- High-Speed MPPT: Features a tracking speed of 15 Hz (15 times per second) for efficient power harvesting.
- అధిక సామర్థ్యం: Achieves 98.3% peak efficiency with a tiny night consumption of 0.9 mA.
- Advanced Protections: Includes electronic protections for reverse panel and battery polarity.
- మన్నిక & సమ్మతి: Made in the USA, certified cETLus, Class 1 Div.2, and conforms to CE, FCC, RoHS standards.
2. సెటప్ మరియు ఇన్స్టాలేషన్
Proper installation is crucial for the safe and efficient operation of your Genasun GV-10-Li-14.2V charge controller. Follow these steps carefully.
2.1 వైరింగ్ రేఖాచిత్రం
Image 2.1: Wiring diagram for the Genasun GV-10-Li-14.2V controller, illustrating connections for a 4S LiFePO4 battery and a solar panel. The diagram shows the positive and negative terminals for both battery and panel connections, and the location of the multicolor LED indicator.
2.2 కనెక్షన్ దశలు
- Connect Battery First: Connect the positive (+) and negative (-) terminals of your 4S LiFePO4 battery to the 'BATT' terminals on the charge controller. Ensure correct polarity. The controller will not operate without a battery connected.
- సోలార్ ప్యానెల్ను కనెక్ట్ చేయండి: Connect the positive (+) and negative (-) terminals of your solar panel to the 'PANEL' terminals on the charge controller. Ensure correct polarity.
- కనెక్షన్లను ధృవీకరించండి: Double-check all connections for correct polarity and secure fastening. Incorrect polarity can damage the unit, although the controller has built-in protection.
The controller is designed for simple plug-and-play operation. Once connected, it will automatically begin tracking the maximum power point of your solar panel and charging the battery.
3. ఆపరేటింగ్ సూచనలు
The Genasun GV-10-Li-14.2V operates autonomously once connected. The multicolor LED provides status indications.
3.1 LED సూచిక స్థితి
- ఆకుపచ్చ (ఘన): Battery is fully charged, or the controller is in standby mode (e.g., no solar input, or battery is at float voltagమరియు).
- ఆకుపచ్చ (ఫ్లాషింగ్): Battery is currently charging. The flash rate may vary with charging intensity.
- ఎరుపు (ఘన): Indicates an error condition. This could be due to incorrect wiring, over-voltage from the panel, or a battery fault. Disconnect all power and re-check connections.
3.2 MPPT Operation
The controller continuously tracks the maximum power point of the solar panel to extract the most power available. This high-speed tracking (15 times per second) ensures optimal energy harvest even under rapidly changing light conditions.
4. నిర్వహణ
The Genasun GV-10-Li-14.2V is designed for minimal maintenance. However, periodic checks can ensure long-term reliability.
- దృశ్య తనిఖీ: Periodically inspect the controller and all wiring for any signs of damage, corrosion, or loose connections.
- శుభ్రపరచడం: Keep the controller free from dust, dirt, and moisture. Use a dry, soft cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- వెంటిలేషన్: Ensure the controller is installed in a location with adequate airflow to prevent overheating, although its design is highly efficient.
5. ట్రబుల్షూటింగ్
If you encounter issues with your Genasun GV-10-Li-14.2V, refer to the following troubleshooting guide.
- LED కార్యాచరణ లేదు:
- Ensure the battery is connected first and has sufficient voltage. The controller requires battery power to operate.
- బ్యాటరీ ధ్రువణతను తనిఖీ చేయండి.
- Red LED (Error):
- Disconnect both the solar panel and the battery.
- Re-connect the battery first, then the solar panel, ensuring correct polarity for both.
- Verify that the solar panel voltage కంట్రోలర్ యొక్క గరిష్ట ఇన్పుట్ వాల్యూమ్ను మించదుtage (34V max).
- బ్యాటరీ ఛార్జింగ్ లేదు:
- Check solar panel connections and ensure the panel is receiving adequate sunlight.
- బ్యాటరీ వాల్యూమ్ అని ధృవీకరించండిtage is below the full charge voltage (14.2V). If the battery is already full, the controller will enter standby mode (solid green LED).
- Ensure the solar panel is producing sufficient voltagఇ మరియు ప్రస్తుత.
If problems persist after following these steps, contact Genasun customer support.
6. స్పెసిఫికేషన్లు
| ఫీచర్ | స్పెసిఫికేషన్ |
|---|---|
| మోడల్ | GV-10-Li-14.2V |
| బ్యాటరీ రకం | 4S LiFePO4 (Lithium Iron Phosphate) |
| ఛార్జింగ్ కరెంట్ | 10.5 ఎ |
| ఛార్జ్ ప్రోfile | CC/CV at 14.2 V (3.55 V per cell) |
| సిఫార్సు చేయబడిన గరిష్ట ప్యానెల్ పవర్ | 140 W |
| గరిష్టంగా ప్యానెల్ వాల్యూమ్tagఇ (OCV) | 34 వి |
| MPPT Tracking Speed | 15 Hz (15 times per second) |
| పీక్ ఎఫిషియెన్సీ | 98.3% |
| Night Consumption | 0.9 mA |
| రక్షణలు | Reverse panel and battery polarity |
| మెటీరియల్ | మెటల్ |
| వస్తువు బరువు | 6.6 ఔన్సులు (0.41 పౌండ్లు) |
| ధృవపత్రాలు | cETLus, Class 1 Div.2, CE, FCC, RoHS |
| UPC | 650267227261 |
7. వారంటీ సమాచారం
The Genasun GV-10-Li-14.2V MPPT Charge Controller comes with a 5 సంవత్సరాల వారంటీ. ఈ వారంటీ సాధారణ ఉపయోగంలో మెటీరియల్స్ మరియు పనితనంలో లోపాలను కవర్ చేస్తుంది. వారంటీ క్లెయిమ్ల కోసం దయచేసి మీ కొనుగోలు రుజువును ఉంచుకోండి.
8. మద్దతు
For technical assistance, warranty claims, or further inquiries regarding your Genasun GV-10-Li-14.2V MPPT Charge Controller, please contact Genasun customer support. As a product made in the USA, dedicated support is available to assist you.
Image 8.1: Genasun brand logo.
