Godox X1R-S 2.4G TTL Wireless Flash Receiver for Sony Cameras

1. పరిచయం

The Godox X1R-S is a 2.4G wireless flash receiver designed for Sony DSLR cameras, offering TTL (Through-The-Lens) autoflash compatibility and high-speed sync capabilities. This receiver integrates seamlessly into the Godox wireless X system, allowing for remote control of compatible flashes and studio strobes. This manual provides detailed instructions for setting up, operating, and maintaining your X1R-S receiver.

2. ఉత్పత్తి ముగిసిందిview

ముఖ్య లక్షణాలు:

• అనుకూలత: Designed for Sony DSLR cameras, supporting TTL Autoflash.
• వైర్‌లెస్ సిస్టమ్: Built-in 2.4G wireless transmission for reliable communication up to 100 meters.
• ఫ్లాష్ మోడ్‌లు: Supports TTL Autoflash, Manual Flash, and Multi-Flash modes.
• Sync Functions: 1/8000s High-Speed Sync (HSS), Flash Exposure Compensation (FEC), Flash Exposure Lock (FEL), Modeling Flash.
• నియంత్రణ: Wireless remote control and grouping system with 5 groups (A/B/C/D/E) in GR mode and 3 groups (A/B/C) in Ratio mode, across 32 channels.
• షట్టర్ విడుదల: Functions as a wireless shutter release via its 2.5mm sync port.
• ప్రదర్శన: Wide LCD panel with backlight for easy operation.
• శక్తి: Uses 2x AA batteries.
• ఫర్మ్‌వేర్: ఫర్మ్‌వేర్ అప్‌గ్రేడ్‌ల కోసం మైక్రో USB పోర్ట్.

కాంపోనెంట్ ఐడెంటిఫికేషన్:

మూర్తి 1: ముందు view of the Godox X1R-S receiver, showing the hot shoe mount and 'TEST' button.

మూర్తి 2: టాప్ view of the Godox X1R-S receiver, highlighting the LCD screen and channel/group buttons.

మూర్తి 3: వైపు view of the Godox X1R-S receiver, showing the Micro USB port and 2.5mm sync port.

3. సెటప్

3.1 బ్యాటరీ ఇన్‌స్టాలేషన్

1. Slide open the battery compartment cover located on the side of the receiver.
2. రెండు (2) AA బ్యాటరీలను చొప్పించండి, సరైన ధ్రువణతను (+/-) నిర్ధారించుకోండి.
3. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.

Figure 4: The battery compartment of the X1R-S receiver, showing two AA batteries being inserted.

3.2 రిసీవర్‌ను మౌంట్ చేయడం

1. Attach the X1R-S receiver to the hot shoe of your Sony camera.
2. Secure the receiver by tightening the locking wheel.
3. Mount your compatible flash unit onto the hot shoe of the X1R-S receiver.

చిత్రం 5: దిగువ view of the X1R-S receiver, showing the hot shoe mount for camera attachment.

3.3 Connecting to Studio Strobes/Other Devices

For studio strobes or other devices requiring a sync connection, use the provided 2.5mm sync cable. Connect one end to the 2.5mm sync port on the X1R-S receiver and the other end to the sync port of your studio strobe or device.

Figure 6: The X1R-S receiver shown with various sync cables for connecting to different flash units.

3.4 Channel and Group Settings

Ensure the channel and group settings on your X1R-S receiver match those on your Godox X-series transmitter (sold separately). This ensures proper communication between the units.

• Use the 'CH' button to select the desired channel (1-32).
• Use the 'GR' button to select the desired group (A/B/C/D/E).

4. ఆపరేటింగ్ సూచనలు

4.1 పవర్ ఆన్/ఆఫ్

Slide the ON/OFF switch located on the side of the receiver to power it on or off.

4.2 Test Flash

Press the 'TEST' button on the receiver to manually trigger the connected flash unit. The 'STATUS' indicator will light up to confirm the flash has fired.

4.3 వైర్‌లెస్ ఫ్లాష్ కంట్రోల్

Once the receiver is properly set up and paired with a compatible Godox X-series transmitter, the flash connected to the X1R-S will fire in sync with your camera's shutter release, according to the settings configured on the transmitter. This includes TTL, Manual, Multi-flash, HSS, FEC, and FEL functions.

4.4 Wireless Shutter Release

The X1R-S receiver can also function as a wireless shutter release for your camera. Connect the receiver to your camera's shutter release port using an appropriate 2.5mm sync cable. The shutter release function is typically controlled via the transmitter.

4.5 LCD ప్యానెల్

The wide LCD panel displays current settings such as channel, group, flash mode, and battery status. The backlight can be toggled on/off for visibility in various lighting conditions.

5. నిర్వహణ

5.1 బ్యాటరీ భర్తీ

Replace the AA batteries when the battery indicator on the LCD panel shows low power to ensure uninterrupted operation.

5.2 ఫర్మ్‌వేర్ అప్‌గ్రేడ్

The X1R-S receiver features a Micro USB port for firmware upgrades. Visit the official Godox website for the latest firmware and instructions to ensure optimal performance and compatibility.

6. ట్రబుల్షూటింగ్

• ఫ్లాష్ వెలగడం లేదు:
  • Check if the receiver is powered on and has fresh batteries.
  • Ensure the channel and group settings on the receiver match the transmitter.
  • Verify that the flash unit is properly mounted and powered on.
  • Check the connection of the 2.5mm sync cable if using a studio strobe.
  • Test the flash manually using the 'TEST' button on the receiver.
• అస్థిర కాల్పులు:
  • Ensure the receiver and transmitter are within the effective operating range (up to 100m).
  • Check for potential interference from other 2.4G wireless devices. Try changing channels.
  • Verify battery levels in both the receiver and the connected flash unit.
• TTL/HSS not working:
  • Confirm that both your camera and flash unit support TTL/HSS.
  • Ensure the receiver is securely mounted on the camera's hot shoe and the flash is securely mounted on the receiver.
  • Check the settings on your transmitter to ensure TTL/HSS is enabled.

7. స్పెసిఫికేషన్లు

8. అధికారిక ఉత్పత్తి వీడియోలు

Godox CT-16 Flash Trigger Kit Operation

Godox CT-16 Wireless Flash Trigger

Godox X3 Trigger Operation Tutorial

9. వారంటీ మరియు మద్దతు

For warranty information, technical support, or service inquiries, please refer to the official Godox website or contact your authorized dealer. Specific warranty terms may vary by region and retailer.