MTX డిజిటల్ కాలిపర్ 6 IN (150mm) యూజర్ మాన్యువల్

1. పరిచయం

Thank you for choosing the MTX Digital Caliper. This precision measuring instrument is designed for accurate internal, external, depth, and step measurements. Constructed from durable stainless steel, it features an easy-to-read LCD display for clear measurement readings. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your digital caliper.

చిత్రం 1.1: మొత్తం మీద view of the MTX Digital Caliper, showing the main body, jaws, LCD display, and control buttons.

2. భద్రతా సమాచారం

Please read and understand all safety instructions before operating the digital caliper. Failure to follow these instructions may result in injury or damage to the tool.

• Always handle the caliper with care to avoid dropping or impacting it, which can affect its accuracy.
• Keep the caliper clean and free from dust, dirt, and moisture.
• Do not apply excessive force when taking measurements.
• Store the caliper in its protective case when not in use to prevent damage.
• బ్యాటరీలను పిల్లలకు అందుబాటులో లేకుండా ఉంచండి. ఉపయోగించిన బ్యాటరీలను బాధ్యతాయుతంగా పారవేయండి.

3. ఉత్పత్తి ముగిసిందిview

Familiarize yourself with the components of your digital caliper:

1. External Measuring Jaws: Used for measuring external dimensions.
2. Internal Measuring Jaws: Used for measuring internal dimensions.
3. Depth Measuring Blade: Used for measuring depths.
4. Step Measuring Face: Used for measuring step dimensions.
5. Main Scale (Beam): The fixed part of the caliper with the main measurement scale.
6. Movable Jaw: Slides along the main scale.
7. LCD డిస్ప్లే: Shows digital measurement readings.
8. ఆన్/ఆఫ్ బటన్: యూనిట్‌ని ఆన్ లేదా ఆఫ్ చేస్తుంది.
9. ZERO బటన్: Sets the display to zero at any position.
10. mm/inch Button: Switches between millimeter and inch units.
11. Thumb Roller: For fine adjustment of the movable jaw.
12. లాకింగ్ స్క్రూ: Secures the movable jaw in position.

చిత్రం 3.1: కోణీయ view highlighting the LCD display, control buttons, and measuring jaws.

4. సెటప్

4.1. బ్యాటరీ ఇన్‌స్టాలేషన్

The digital caliper is powered by a button cell battery (typically SR44/LR44 1.5V). Batteries are not included with the product.

1. Locate the battery compartment cover on the back of the display unit.
2. కవర్‌ని స్లైడ్ చేయండి.
3. Insert a new 1.5V button cell battery with the positive (+) side facing up.
4. బ్యాటరీ కంపార్ట్‌మెంట్ కవర్‌ను సురక్షితంగా మూసివేయండి.

4.2. Initial Power On and Zeroing

1. నొక్కండి ఆన్/ఆఫ్ button to turn on the caliper.
2. Gently close the external measuring jaws completely.
3. నొక్కండి జీరో button. The display should now read 0.00 mm or 0.000 in.
4. నొక్కండి mm/inch button to select your desired unit of measurement.

Your caliper is now ready for use.

5. ఆపరేటింగ్ సూచనలు

Ensure the caliper is clean and zeroed before taking any measurements.

5.1. External Measurement

1. Open the external measuring jaws wider than the object to be measured.
2. దవడల మధ్య వస్తువును ఉంచండి.
3. Gently close the jaws until they make firm contact with the object. Use the thumb roller for fine adjustment.
4. Read the measurement directly from the LCD display.
5. For consistent readings, apply light, even pressure.

Image 5.1: Measuring the external diameter of a component.

Image 5.2: Measuring the external dimension of a square tube.

5.2. Internal Measurement

1. Insert the internal measuring jaws into the opening to be measured.
2. Open the jaws until they make firm contact with the inner walls of the opening.
3. Read the measurement from the LCD display.

Image 5.3: Measuring the internal dimension of a square tube.

5.3. లోతు కొలత

1. Place the end of the main scale firmly on the top surface of the object.
2. Extend the depth measuring blade into the hole or recess until its end touches the bottom.
3. Read the measurement from the LCD display.

5.4. Step Measurement

1. Place the step measuring face on the higher surface of the step.
2. Slide the movable jaw until the end of the main scale rests on the lower surface of the step.
3. Read the measurement from the LCD display.

6. నిర్వహణ

• శుభ్రపరచడం: Wipe the caliper clean with a soft, dry cloth after each use. Avoid using solvents or harsh chemicals.
• నిల్వ: Store the caliper in its original protective case in a dry, clean environment when not in use.
• బ్యాటరీ భర్తీ: If the display becomes dim or erratic, replace the battery.
• క్రమాంకనం: Periodically check the zero point. If the caliper does not zero correctly, clean the measuring faces and try again. If issues persist, professional calibration may be required.

7. ట్రబుల్షూటింగ్

8. స్పెసిఫికేషన్లు

Image 8.1: Back of the caliper featuring useful measurement conversion charts.

9. వారంటీ మరియు మద్దతు

For warranty information or technical support, please refer to the documentation provided with your purchase or contact MTX customer service through their official webసైట్. కొనుగోలు రుజువుగా మీ కొనుగోలు రసీదుని ఉంచండి.

Manufacturer: Mundo das Ferramentas do Brasil Ltda.