Skytech 9800332 TS/R-2 Wireless Wall Mounted LCD Fireplace Remote Control Thermostat

పరిచయం

The Skytech 9800332 TS/R-2 system is designed to provide a safe, reliable, and user-friendly remote control solution for gas heating appliances. This manual will guide you through the installation, operation, and maintenance of your new wireless thermostat system.

ముఖ్యమైన భద్రతా సమాచారం

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in property damage, personal injury, or death. Keep this manual for future reference.

• Ensure all wiring is performed by a qualified professional if you are unsure.
• Always turn off the gas supply to the appliance before performing any installation or maintenance.
• Do not expose the remote control or receiver to water or extreme temperatures.
• Replace batteries regularly to ensure proper operation and prevent leakage.
• This system is intended for use with gas heating appliances only.

ప్యాకేజీ విషయాలు

మీ ప్యాకేజీలో అన్ని అంశాలు ఉన్నాయని ధృవీకరించండి:

• ట్రాన్స్‌మిటర్ (రిమోట్ కంట్రోల్)
• రిసీవర్ బాక్స్
• వాల్ క్లిప్
• వాల్ ప్లేట్
• ఇన్స్టాలేషన్ సూచనలు
• Batteries (for transmitter and receiver)
• Temperature Sensor (integrated into the transmitter)

ఉత్పత్తి ముగిసిందిview

The Skytech 9800332 TS/R-2 is a wireless, wall-mounted thermostat system designed for convenient control of your fireplace. It features a clear LCD display and simple three-button operation.

మూర్తి 1: Skytech 9800332 TS/R-2 Wireless Thermostat. The unit features an LCD screen displaying '72°F' and 'ROOM SET TEMP', with 'SKYTECH' branding below. At the bottom are three buttons: an 'ON' arrow button, a 'SET' button, and an 'OFF' arrow button.

ముఖ్య లక్షణాలు:

• 3-Button On/Set/Off wall mounted thermostat with LCD display
• LCD displays room and thermostat set temperature in °F or °C
• Battery powered receiver box with learn function and On/Remote/Off slider switch
• Receiver can be installed in wall, on the hearth or under the fireplace behind the control access panel
• Lighted display for easy viewing
• తక్కువ బ్యాటరీ సూచిక

సెటప్ మరియు ఇన్‌స్టాలేషన్

1. బ్యాటరీ ఇన్‌స్టాలేషన్

Install the provided batteries into both the transmitter (remote control) and the receiver box. Ensure correct polarity.

2. Receiver Placement

The receiver box can be installed in various locations:

• Inside the wall (using the wall plate)
• On the hearth
• Under the fireplace, behind the control access panel

Ensure the receiver is placed in a location where it can receive signals from the transmitter and is not exposed to excessive heat.

3. రిసీవర్ వైరింగ్

Connect the receiver to your gas heating appliance's control valve according to the appliance manufacturer's instructions. Typically, this involves connecting two low-voltage wires from the receiver to the appliance's millivolt or 24V control terminals. Consult a qualified technician if you are unsure about wiring.

4. Pairing (Learn Function)

To establish communication between the transmitter and receiver:

1. Locate the "LEARN" button on the receiver box.
2. Press and hold the "LEARN" button until you hear a beep or see an indicator light flash.
3. Within 20 seconds, press any button on the transmitter.
4. The receiver will beep or flash again to confirm successful pairing.

Test the connection by pressing the ON/OFF buttons on the transmitter.

ఆపరేటింగ్ సూచనలు

1. పవర్ ఆన్/ఆఫ్

• To turn the fireplace ON, press the ON (Up Arrow) ట్రాన్స్మిటర్పై బటన్.
• To turn the fireplace OFF, press the OFF (Down Arrow) ట్రాన్స్మిటర్పై బటన్.

2 ఉష్ణోగ్రతను సెట్ చేయడం

The LCD displays both the current room temperature and the set temperature.

1. నొక్కండి సెట్ button once. The set temperature will flash.
2. ఉపయోగించండి ON (Up Arrow) or OFF (Down Arrow) కావలసిన ఉష్ణోగ్రతను సర్దుబాటు చేయడానికి బటన్లు.
3. నొక్కండి సెట్ again to confirm, or wait a few seconds for the setting to automatically save.

3. Switching Between °F and °C

ఉష్ణోగ్రత ప్రదర్శన యూనిట్‌ని మార్చడానికి:

• With the display showing the room temperature, press and hold the సెట్ button for approximately 5 seconds until the unit changes.

4. Receiver Slider Switch

The receiver box has a slider switch with three positions:

• పై: Manually turns the fireplace ON, bypassing the remote control.
• తొలగించు: Allows the fireplace to be controlled by the wireless transmitter. This is the standard operating position.
• ఆఫ్: Manually turns the fireplace OFF, bypassing the remote control.

నిర్వహణ

బ్యాటరీ భర్తీ

When the low battery indicator appears on the LCD, or if the system becomes unresponsive, replace the batteries in both the transmitter and receiver. Use fresh alkaline batteries of the specified type (refer to specifications). Dispose of old batteries responsibly.

క్లీనింగ్

Wipe the surfaces of the transmitter and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.

ట్రబుల్షూటింగ్

స్పెసిఫికేషన్లు

వారంటీ మరియు మద్దతు

For warranty information and technical support, please refer to the documentation included with your purchase or contact SkyTech customer service directly. Keep your proof of purchase for warranty claims.

తయారీదారు: స్కైటెక్