PHASAK SIRIUS PH 7322 UPS 2260VA Uninterruptible Power Supply User Manual

1. పరిచయం

This manual provides essential instructions for the installation, operation, and maintenance of your PHASAK SIRIUS PH 7322 Uninterruptible Power Supply (UPS). The SIRIUS Interactive series offers reliable protection against power variations and spikes, ensuring stable and clean energy for connected equipment. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. భద్రతా సూచనలు

Observe the following safety precautions to prevent injury and damage to the UPS or connected equipment:

• UPS తెరవవద్దు casing. లోపల వినియోగదారు-సేవ చేయగల భాగాలు లేవు. అన్ని సర్వీసింగ్‌లను అర్హత కలిగిన సేవా సిబ్బందికి సూచించండి.
• Do not connect appliances that could overload the UPS, such as laser printers, to battery-backed outlets (use surge-only outlets for these).
• Ensure the UPS is placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Connect the UPS to a grounded AC power outlet only.
• In case of emergency, press the power button to turn off the UPS and disconnect it from the AC power source.
• The UPS contains internal batteries. Do not dispose of the UPS or its batteries in fire. Batteries may explode.

3. ఉత్పత్తి లక్షణాలు

The PHASAK SIRIUS PH 7322 UPS is equipped with several features designed for optimal performance and protection:

• LCD / LED function display for real-time status monitoring.
• ఆటోమేటిక్ వాల్యూమ్tage Regulator (AVR) to stabilize input voltagఇ బ్యాటరీ పవర్ ఉపయోగించకుండా.
• Auto restart/auto-reload function for convenience after power restoration.
• Compatibility with generators for flexible power input.
• Communication: 1 x USB port for connection to a computer.
• Outlets: 3 x Schuko outlets with battery backup and surge protection, and 1 x Schuko outlet with surge protection only.

4. సెటప్

4.1 అన్‌ప్యాకింగ్ మరియు ప్లేస్‌మెంట్

• Carefully unpack the UPS and inspect it for any shipping damage.
• Place the UPS on a flat, stable surface in a clean, dry, and well-ventilated environment. Avoid areas with excessive dust, humidity, or extreme temperatures.
• Ensure there is adequate clearance around the UPS for proper airflow, especially around ventilation openings.

4.2 Connecting the UPS

Refer to the rear panel diagram for outlet identification.

Figure 1: Rear Panel Connections. This image displays the back of the PHASAK SIRIUS PH 7322 UPS, highlighting the four Schuko outlets (three with surge and battery backup, one with surge protection only), the USB communication port, and the circuit breaker button.

1. AC పవర్‌కి కనెక్ట్ చేయండి: UPS పవర్ కార్డ్‌ను గ్రౌండెడ్ వాల్ అవుట్‌లెట్‌లోకి ప్లగ్ చేయండి.
2. పరికరాలను కనెక్ట్ చేయండి:
   • Connect critical equipment (e.g., computers, monitors, network devices) to the Surge & Battery outlets (typically 3 outlets). These outlets provide both surge protection and battery backup during power outages.
   • Connect non-critical equipment that requires only surge protection (e.g., laser printers, scanners) to the ఉప్పెన మాత్రమే outlet (typically 1 outlet).
3. USB కమ్యూనికేషన్: Connect the provided USB cable from the UPS USB port to your computer. Install the PowerGuide management software (available from Phasak's website) to enable advanced monitoring and shutdown features.

పూర్తి బ్యాటరీ సామర్థ్యాన్ని నిర్ధారించుకోవడానికి UPSని ప్రారంభ వినియోగానికి ముందు కనీసం 8 గంటలు ఛార్జ్ చేయడానికి అనుమతించండి.

5. ఆపరేషన్

5.1 పవర్ చేయడం ఆన్/ఆఫ్

Figure 2: Front Panel Display and Controls. This image shows the front of the PHASAK SIRIUS PH 7322 UPS, featuring the LCD display that shows input/output voltage and status icons, and the main power button.

• పవర్ ఆన్ చేయడానికి: Press and hold the power button on the front panel for approximately 2 seconds until you hear a beep and the display illuminates.
• పవర్ ఆఫ్ చేయడానికి: Press and hold the power button for approximately 2 seconds until you hear a beep and the display turns off.

5.2 LCD డిస్ప్లే సమాచారం

The LCD display provides real-time status information about the UPS:

• ఇన్పుట్ వాల్యూమ్tage: ప్రస్తుత వాల్యూమ్‌ను ప్రదర్శిస్తుందిtage from the utility power.
• అవుట్పుట్ వాల్యూమ్tage: వాల్యూమ్‌ని ప్రదర్శిస్తుందిtage supplied by the UPS to connected equipment.
• బ్యాటరీ స్థాయి: మిగిలిన బ్యాటరీ ఛార్జ్‌ను సూచిస్తుంది.
• లోడ్ స్థాయి: శాతాన్ని చూపుతుందిtage of the UPS's capacity being used by connected equipment.
• స్థితి చిహ్నాలు: Various icons indicate operational mode (e.g., AC mode, battery mode, AVR active, fault). Refer to the full software manual for detailed icon explanations.

5.3 ఆటోమేటిక్ వాల్యూమ్tagఇ నియంత్రణ (AVR)

UPS స్వయంచాలకంగా మైనర్ వాల్యూమ్‌ను సరిచేస్తుందిtage fluctuations (sags and surges) without switching to battery power, extending battery life and providing stable power to your devices.

5.4 బ్యాటరీ మోడ్

శక్తి సమయంలో outage, the UPS will automatically switch to battery power. An audible alarm will sound, and the display will indicate battery mode. The alarm will typically sound more frequently as the battery level becomes critically low, signaling that connected equipment should be safely shut down.

6. నిర్వహణ

• శుభ్రపరచడం: Use a dry, soft cloth to clean the exterior of the UPS. Do not use liquid or aerosol cleaners.
• బ్యాటరీ సంరక్షణ: To maintain optimal battery life, ensure the UPS is connected to AC power at all times. If the UPS is stored for an extended period, recharge it every 3 months for at least 8 hours.
• బ్యాటరీ భర్తీ: Batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
• వెంటిలేషన్: Regularly check that the ventilation openings are clear of dust and obstructions to prevent overheating.

7. ట్రబుల్షూటింగ్

8. స్పెసిఫికేషన్లు

9. వారంటీ మరియు మద్దతు

All PHASAK Uninterruptible Power Systems come with a 2-year "In Situ" warranty. For technical support, warranty claims, or service inquiries, please contact your local Phasak distributor or visit the official Phasak webసంప్రదింపు సమాచారం కోసం సైట్.

Please have your product model (PH 7322) and purchase information ready when contacting support.