1. ఉత్పత్తి ముగిసిందిview
The Zoeller Model 49-0005 Water Riddr III is a compact and robust automatic sump pump designed for efficient water removal from sump basins. Its design allows it to fit into smaller sump pits, making it suitable for various residential applications. The pump features a factory-set float switch engineered to maximize pumping range while preventing float hang-ups, ensuring reliable operation. A sturdy pump base is integrated to prevent larger debris from clogging the pump and to maintain pump stability within the pit.
- కఠినమైన నిర్మాణం: Features a cast iron motor housing with a corrosion-resistant baked enamel finish for durability.
- Efficient Solids Handling: Capable of passing 3/8 inch spherical solids, reducing the risk of clogs.
- నమ్మదగిన ఫ్లోట్ స్విచ్: Equipped with a tethered float switch for automatic operation.
- మన్నికైన హార్డ్వేర్: Utilizes stainless steel screws and hardware for extended life.
- కాంపాక్ట్ డిజైన్: Maximum width of 8.2 inches and height of 10.5 inches, designed to fit 12-inch diameter pits.
మూర్తి 1: ముందు view of the Zoeller Model 49-0005 Water Riddr III Automatic Sump Pump, showing the main body, float switch, and discharge port.
2. భద్రతా సమాచారం
Read all instructions carefully before installation and operation. Failure to follow these instructions could result in serious injury or property damage.
- విద్యుత్ భద్రత: Always disconnect power to the pump before performing any maintenance or installation. Ensure the electrical supply matches the pump's voltage (115 Volts). Use a grounded outlet and avoid extension cords.
- నీటి భద్రత: Do not operate the pump in areas where flammable liquids or corrosive chemicals are present. This pump is designed for clear water only.
- సంస్థాపన: Ensure the pump is installed in a stable, level position. Do not lift the pump by its power cord or float switch.
- పిల్లలు మరియు పెంపుడు జంతువులు: Keep children and pets away from the sump pit and operating pump.
3. సెటప్ మరియు ఇన్స్టాలేషన్
Proper installation is crucial for the optimal performance and longevity of your sump pump.
- Sump Pit Preparation: Ensure your sump pit is clean and free of debris. The pump is designed to fit into pits with a minimum diameter of 12 inches.
- పంపు స్థానాన్ని నిర్ణయించడం: Place the pump on a solid, level surface at the bottom of the sump pit. The sturdy base helps prevent movement.
- ఉత్సర్గ పైపింగ్: Connect appropriate discharge piping to the pump's outlet. Use a check valve in the discharge line to prevent water from flowing back into the pit when the pump shuts off. Ensure all connections are secure and watertight.
- Float Switch Placement: The tethered float switch is factory-set for optimal operation. Ensure the float can move freely without obstruction within the sump pit. It should not touch the sides of the pit or any piping.
- విద్యుత్ కనెక్షన్: Plug the 10-foot power cord into a grounded 115-volt electrical outlet. Ensure the circuit is protected by a ground fault circuit interrupter (GFCI) for safety.
మూర్తి 2: వైపు view of the sump pump, highlighting the tethered float switch and its connection point. Ensure the float has ample space to move.
Figure 3: The sump pump with its full 10-foot power cord, ready for electrical connection.
4. ఆపరేటింగ్ సూచనలు
The Zoeller Model 49-0005 is an automatic sump pump, meaning it will activate and deactivate based on the water level in the sump pit.
- ఆటోమేటిక్ ఆపరేషన్: The pump will automatically turn ON when the water level reaches approximately 11-1/4 inches, activating the tethered float switch.
- ఆటోమేటిక్ షట్-ఆఫ్: The pump will automatically turn ఆఫ్ when the water level drops to approximately 4-1/8 inches, as the float switch returns to its lower position.
- ఫ్లో రేట్: The pump is capable of a maximum flow rate of 32 gallons per minute, efficiently removing water from the pit.
- ప్రారంభ పరీక్ష: After installation, fill the sump pit with water to ensure the pump activates and deactivates correctly. Observe the float switch movement and water discharge.
5. నిర్వహణ
Regular maintenance helps ensure the long-term reliability and performance of your sump pump.
- నెలవారీ తనిఖీ: Periodically check the sump pit for any accumulated debris, dirt, or sediment. Clean the pit as necessary to prevent pump clogging.
- Float Switch Check: Ensure the float switch moves freely and is not obstructed by wires, pipes, or debris. Manually lift the float to verify the pump activates.
- Discharge Line Inspection: Check the discharge pipe for any blockages or leaks. Ensure the check valve is functioning properly.
- పంప్ హౌసింగ్: Inspect the pump housing for any signs of damage or corrosion. The cast iron construction is designed for durability, but regular visual checks are recommended.
- శీతాకాలం (వర్తిస్తే): If the pump is in an unheated area and not in use during freezing temperatures, ensure it is drained and stored properly to prevent freeze damage.
మూర్తి 4: అండర్ సైడ్ view of the sump pump, showing the sturdy base designed to prevent movement and keep larger debris from entering the pump intake.
6. ట్రబుల్షూటింగ్
If your sump pump is not operating as expected, consult the following common issues and solutions:
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| పంప్ ఆన్ చేయదు. | పంపుకు విద్యుత్ లేదు. | Check power outlet, circuit breaker, and GFCI. Ensure pump is plugged in. |
| Float switch obstructed or defective. | Clear any obstructions around the float. Manually lift the float to test. If still unresponsive, float switch may need replacement. | |
| పంపు నిరంతరం నడుస్తుంది. | Float switch stuck in the 'on' position. | Check for obstructions preventing the float from dropping. Ensure the pit is draining properly. |
| Check valve faulty or missing. | Inspect or install a check valve in the discharge line to prevent water recirculation. | |
| పంపు నడుస్తుంది కానీ నీరు బయటకు రాదు. | Discharge line clogged or frozen. | Inspect and clear any blockages in the discharge pipe. Ensure pipes are not frozen. |
| Pump intake clogged. | Disconnect power and clear any debris from the pump's intake screen. | |
| పంపు శబ్దం చేస్తుంది లేదా విపరీతంగా కంపిస్తుంది. | Debris in pump impeller. | Disconnect power and inspect the impeller for foreign objects. |
| Pump not sitting level. | Ensure the pump is on a stable, level surface in the pit. |
7. స్పెసిఫికేషన్లు
| స్పెసిఫికేషన్ | వివరాలు |
|---|---|
| బ్రాండ్ | జోయెల్లర్ |
| మోడల్ సంఖ్య | 49-0005 (WM49) |
| అశ్వశక్తి | 1/4 హెచ్పి (0.25 హెచ్పి) |
| వాల్యూమ్tage | 115 వోల్ట్లు |
| శక్తి మూలం | AC/DC |
| గరిష్ట ప్రవాహం రేటు | నిమిషానికి 32 గ్యాలన్లు |
| గరిష్ట లిఫ్టింగ్ ఎత్తు | 10.5 అంగుళాలు |
| On Point | 11-1/4 అంగుళాలు |
| Off Point | 4-1/8 అంగుళాలు |
| మెటీరియల్ | తారాగణం ఇనుము |
| రంగు | ఆకుపచ్చ |
| ఉత్పత్తి కొలతలు (L x W x H) | 10.5" x 8.2" x 10.5" |
| వస్తువు బరువు | 11 పౌండ్లు |
| త్రాడు పొడవు | 10 Feet (9 Feet listed in some specs) |
| Fits Pit Diameter | 12 అంగుళాలు (కనీసం) |
8. వారంటీ మరియు మద్దతు
Warranty information for the Zoeller Model 49-0005 Water Riddr III Automatic Sump Pump is typically provided with the product packaging or can be obtained directly from the manufacturer. Please retain your proof of purchase for warranty claims.
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Zoeller customer support directly. You can often find contact information on the manufacturer's official webసైట్ లేదా ఉత్పత్తిని కొనుగోలు చేసిన రిటైలర్ ద్వారా.
Visit the official Zoeller Store for more information: Zoeller Store on Amazon
