1. పరిచయం
This manual provides essential information for the proper setup, operation, and maintenance of your XP Metal Detectors MI-4 Pinpointer. Designed for all detectorists, the MI-4 offers reliable target pinpointing with advanced features and a durable, waterproof construction.
Figure 1: The XP MI-4 Pinpointer, shown with its included lanyard and belt holster.
2. సెటప్
2.1 బ్యాటరీ ఛార్జింగ్
The MI-4 Pinpointer is equipped with a rechargeable lithium polymer battery. To charge, locate the charging port, typically protected by a cap, and connect the provided charging cable. Ensure the cap is securely fastened after charging to maintain waterproofing.
2.2 Lanyard and Holster Attachment
Attach the coiled lanyard to the designated attachment point on the pinpointer and secure the other end to your belt or equipment to prevent loss. The rotating holster can be attached to your belt, providing easy access and secure storage for the pinpointer during use.
Figure 2: The MI-4 Pinpointer securely held in its rotating holster.
3. ఆపరేటింగ్ సూచనలు
3.1 పవర్ ఆన్/ఆఫ్
The MI-4 features a single button for all functions. Press and hold the button to power the device on or off. An integrated LED light will illuminate when the device is active.
3.2 Detection Modes and Sensitivity
The pinpointer operates at a detection frequency of 12kHz. It offers 6 factory programs and 3 levels of sensitivity. These settings can be adjusted via the single control button to suit various detecting conditions and target sizes.
3.3 Audio and Vibration Feedback
The MI-4 provides both audio (speaker) and vibration feedback. These can be activated or deactivated independently. The intensity of the feedback increases as the pinpointer approaches a metallic target, aiding in precise location.
3.4 Retune Function
To re-calibrate the pinpointer, briefly press the control button while holding the device away from any metallic sources. This function is useful for adapting to changing ground conditions, such as salt water or mineralized soil, by re-calibrating while in contact with the ground.
Figure 3: The MI-4's 360-degree detection and integrated LED light in action.
4. నిర్వహణ
4.1 వాటర్ప్రూఫింగ్
The MI-4 Pinpointer is waterproof up to 20 feet (6 meters). Ensure all caps and covers are securely closed before submerging the device in water.
4.2 శుభ్రపరచడం మరియు నిల్వ చేయడం
After use, especially in wet or dirty conditions, clean the pinpointer with fresh water and a soft cloth. Store the device in a cool, dry place away from direct sunlight and extreme temperatures. All parts are fully replaceable.
5. ట్రబుల్షూటింగ్
5.1 Unwanted Beeping/False Signals
If the pinpointer becomes uncalibrated or produces continuous unwanted signals, perform the retune function by holding the device away from metal and briefly pressing the control button. For ground mineralization issues, re-calibrate while the tip is in contact with the ground.
5.2 బ్యాటరీ స్థాయి సూచిక
The device indicates battery level upon power-on. If the integrated LED light is set to off, this indication may not be visible. To check the battery level with the light off, you may need to cycle through the settings to temporarily activate the light.
6. స్పెసిఫికేషన్లు
- బ్రాండ్: XP మెటల్ డిటెక్టర్లు
- మోడల్: MI-4
- రంగు: ఎరుపు
- శక్తి మూలం: బ్యాటరీ ఆధారితం (పునర్వినియోగపరచదగిన లిథియం పాలిమర్)
- వస్తువు బరువు: 9.4 ఔన్సులు (0.59 పౌండ్లు)
- ఉత్పత్తి కొలతలు: 4"లీ x 12"వా x 4"హ
- ఆపరేటింగ్ ఫ్రీక్వెన్సీ: 12 KHz
- అంతర్జాతీయ రక్షణ రేటింగ్: IP54 (Waterproof up to 20 feet)
- సున్నితత్వ స్థాయిలు: 3
- కార్యక్రమాలు: 6 Factory Programs
- గుర్తింపు: All-Round 360°
- ఫీచర్లు: Integrated LED Light, Speaker, Vibrator, Retune Function
7. వారంటీ & సపోర్ట్
The XP Metal Detectors MI-4 Pinpointer comes with a 2-year warranty. For support or inquiries regarding replaceable parts, please contact XP Metal Detectors customer service.
