పరిచయం
The Orbit Pro Series 8-Pattern Thumb Control Hose Nozzle Sprayer is designed to provide versatile and efficient watering for various outdoor tasks. Its innovative thumb-control feature allows for effortless water flow adjustment, making it suitable for residential homeowners, professional contractors, and growers. This manual provides essential information for the proper setup, operation, and maintenance of your new hose nozzle.
ఉత్పత్తి ముగిసిందిview
కీ ఫీచర్లు
- ENHANCE YOUR GARDENING EXPERIENCE - Our premium garden hose nozzle sprayer offers versatile spraying options for all your watering needs.
- ADJUSTABLE SPRAY PATTERNS - Easily switch between 7 different water patterns with our innovative rotating nozzle dial feature.
- DURABLE AND LONG-LASTING - Built with high-quality materials, our nozzle for hose ensures long-lasting performance in any watering system.
- ఉపయోగించడానికి మరియు శుభ్రం చేయడానికి సులభం - The user-friendly design of our water hose sprayer makes it simple to operate and easy to clean after use.
- VERSATILE SPRAY PATTERNS - From gentle showers to powerful jets, our spray hose nozzle provides a wide range of spray patterns for various tasks.
ఉత్పత్తి భాగాలు
సెటప్
To set up your Orbit Pro Series Hose Nozzle, ensure your garden hose is equipped with a standard hose fitting. If your hose has a quick-connect fitting, ensure it is compatible with the nozzle's female hose thread inlet.
- Inspect Nozzle: Before first use, check the nozzle for any visible damage or debris in the inlet.
- గొట్టానికి కనెక్ట్ చేయండి: Screw the nozzle onto the end of your garden hose. Hand-tighten until secure. Avoid over-tightening, which can damage the threads or internal washer.
- లీక్ల కోసం తనిఖీ చేయండి: Turn on the water supply slowly. Check the connection point for any leaks. If a leak occurs, tighten slightly or ensure the rubber washer inside the nozzle's inlet is properly seated.
ఆపరేటింగ్ సూచనలు
Thumb Control Operation
The Orbit Pro Series nozzle features an intuitive thumb control for water flow. Simply push the lever forward with your thumb to increase water flow, and pull it back to decrease or shut off the flow. This allows for precise control without needing to constantly return to the spigot.
స్ప్రే నమూనాలను సర్దుబాటు చేయడం
To change the spray pattern, rotate the oversized dial at the front of the nozzle. The dial is designed for easy grip, even with wet hands or gloves. Align the desired pattern (Jet, Shower, Full, H Sweep, V Sweep, Cone, Center, Mist) with the indicator mark on the nozzle body.
నిర్వహణ
Proper maintenance will extend the life of your Orbit hose nozzle.
- శుభ్రపరచడం: Periodically clean the nozzle head to remove mineral deposits or debris that may affect spray patterns. Use a small brush or needle to clear any clogged holes.
- శీతాకాలం: Before freezing temperatures, disconnect the nozzle from the hose and drain any remaining water. Store the nozzle indoors in a dry, protected area to prevent damage from freezing.
- Washer Replacement: If leaks occur at the hose connection, check the rubber washer inside the nozzle. Replace it if it appears worn or cracked.
ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| గొట్టం కనెక్షన్ నుండి నీరు కారుతోంది | Loose connection, worn/missing washer | Tighten connection; replace rubber washer. |
| Low water pressure/weak spray | Clogged nozzle head, low water supply pressure | Clean nozzle holes; check water supply. |
| Difficulty changing spray patterns | Debris in dial mechanism, stiff mechanism | Rinse dial with water; apply silicone lubricant if needed. |
| Thumb control is stiff or stuck | Mineral buildup, internal wear | Flush with water; if persistent, contact support. |
స్పెసిఫికేషన్లు
- మెటీరియల్: జింక్
- బ్రాండ్: కక్ష్య
- అంశం కొలతలు (L x W x H): 2.6 x 5.75 x 5.25 అంగుళాలు
- బాహ్య ముగింపు: మెటల్
- ఇన్లెట్ కనెక్షన్ రకం: Female Hose Thread
- అవుట్లెట్ కనెక్షన్ రకం: G Connector
- వాల్వ్ రకం: బాల్ వాల్వ్
- వస్తువు బరువు: 13.7 ఔన్సులు
- మోడల్ సంఖ్య: 26812
- పరిమాణం: 8-నమూనా
- రంగు: నలుపు
- శైలి: బొటనవేలు నియంత్రణ
- నమూనా: 8-Pattern Pro
- UPC: 046878268128
వారంటీ మరియు మద్దతు
The Orbit Pro Series 8-Pattern Thumb Control Hose Nozzle Sprayer is designed for durability and long-lasting performance. Some users have reported a lifetime warranty for this product, indicating Orbit's commitment to quality.
For specific warranty claims, technical support, or replacement parts, please contact Orbit customer service directly. Refer to the product packaging or the official Orbit webఅత్యంత తాజా సంప్రదింపు సమాచారం కోసం సైట్.
ఆన్లైన్ మద్దతు: Visit the official Orbit webతరచుగా అడిగే ప్రశ్నలు, ఉత్పత్తి నమోదు మరియు అదనపు మద్దతు వనరుల కోసం సైట్.
కస్టమర్ సేవ: Contact Orbit customer service via phone or email for personalized assistance.
