Bennett Marine Bolt Electric Trim Tab System 12" x 12" Instruction Manual

పరిచయం

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bennett Marine Bolt Electric Trim Tab System. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. This system is designed to enhance boat performance by allowing precise control over the vessel's running attitude.

ఉత్పత్తి భాగాలు

The Bennett Marine Bolt Electric Trim Tab System BOLT1212 includes the following components:

• Two (2) Bolt Electric Actuators with 6-foot wire harnesses and waterproof connectors (Mfg. PN# BEA3000).
• Two (2) Stainless Steel Trim Tabs and mounting plates, 12" x 12".
• One (1) Electric Integrated Helm Control (Mfg. PN# OBI9000E).
• Two (2) 20-foot Actuator Wire Harnesses with waterproof connectors (Mfg# BAW2020).
• Mounting Hardware (screws, nuts, washers, brackets).

చిత్రం 1: పైగాview of the Bennett Marine Bolt Electric Trim Tab System components, including actuators, trim tabs, helm control, and wiring.

మూర్తి 2: వివరంగా view of the system components, highlighting the 20-ft wire harnesses, integrated helm control, actuators, and 12"x12" trim tabs.

సెటప్ మరియు ఇన్‌స్టాలేషన్

Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified marine technician. Refer to the detailed diagrams and instructions provided in the packaging for specific mounting locations and wiring schematics.

1. Mounting the Trim Tabs and Actuators

• Trim Tab Placement: Position the 12"x12" stainless steel trim tabs on the transom, ensuring they are parallel to the waterline and clear of any obstructions.
• యాక్యుయేటర్ మౌంటు: The Bolt Electric Actuators feature an adjustable upper hinge. Mount the actuators to the trim tabs and transom according to the provided templates. Ensure the actuators are securely fastened to withstand marine conditions.

Figure 3: Close-up of the BEA3000 electric actuator, highlighting its 13-3/4 inch length (2.5 inch stroke) and adjustable upper hinge for flexible installation.

Figure 4: Chart illustrating recommended trim tab sizes (Span x Chord) for various boat lengths, for both electric and standard hydraulic sets. This system uses 12"x12" electric tabs.

Figure 5: Detailed dimensions of the 12"x12" trim tab, showing span, chord, and actuator mounting points.

2. ఎలక్ట్రికల్ వైరింగ్

• Connect Actuators: Connect the 6-foot wire harnesses from the actuators to the 20-foot extension harnesses. Ensure waterproof connectors are properly sealed.
• హెల్మ్ కంట్రోల్ వైరింగ్: Wire the Integrated Helm Control (OBI9000E) to the vessel's 12V DC power supply and the actuator harnesses. Follow the wiring diagram carefully to ensure correct polarity and function.
• పవర్ కనెక్షన్: Connect the system to a fused 12V DC power source. The system has a current draw of 10 Amps (at 250 lb) and 30 Amps (at 750 lb).

Figure 6: Components of the system, including the BEA3000 actuators, BAW2020 wire harnesses, OBI9000E helm control, and various mounting hardware.

ఆపరేటింగ్ సూచనలు

The Integrated Helm Control provides intuitive operation for adjusting your vessel's trim. The trim tab position LEDs indicate the current tab position.

• "DN" Buttons: Press the "DN" (Down) buttons to lower the trim tabs. Lowering the tabs will push the bow of the boat down.
• "BOW UP" Buttons: Press the "BOW UP" buttons to raise the trim tabs. Raising the tabs will lift the bow of the boat.
• "ALL UP" Button: Simultaneously raises both trim tabs to their fully retracted position.
• "ALL DN" Button: Simultaneously lowers both trim tabs to their fully extended position.
• Auto Tab Retraction: Tabs automatically retract when the ignition is powered off, protecting them during trailering or docking.

Figure 7: The Integrated Helm Control unit, showing the "DN", "BOW UP", "ALL UP", and "ALL DN" buttons, along with LED indicators for trim tab position.

చిత్రం 8: వివిధ views of the trim tabs and helm control in action, demonstrating how the system adjusts the boat's running attitude.

నిర్వహణ

The Bolt Electric Actuators are designed to be maintenance-free and completely waterproof. However, regular inspection of the entire system is recommended to ensure continued optimal performance.

• దృశ్య తనిఖీ: Periodically check the trim tabs, actuators, and wiring for any signs of damage, corrosion, or loose connections.
• శుభ్రపరచడం: Clean the trim tabs and actuators with fresh water after each use, especially in saltwater environments, to prevent salt buildup and corrosion.
• హార్డ్‌వేర్ తనిఖీ: Ensure all mounting hardware remains tight.

ట్రబుల్షూటింగ్

If you experience issues with your trim tab system, refer to the following common troubleshooting steps:

For further assistance, contact Bennett Marine customer support.

స్పెసిఫికేషన్లు

• మోడల్: BOLT1212 (FO4321)
• ట్రిమ్ ట్యాబ్ కొలతలు: 12" x 12"
• వాల్యూమ్tage: 12 వోల్ట్స్ DC
• యాక్యుయేటర్ రకం: Electric (BEA3000)
• Actuator Chord Length: 6 ft (plus 20 ft extension harnesses)
• యాక్చుయేషన్ ఫోర్స్: 750 పౌండ్లు
• Return Force: 750 పౌండ్లు
• ప్రస్తుత డ్రా: 10 Amps (at 250 lb), 30 Amps (at 750 lb)
• ఆపరేషన్ మోడ్: అప్-డౌన్
• నియంత్రణ: Integrated Helm Control (OBI9000E)

వారంటీ మరియు మద్దతు

The Bennett Marine Bolt Electric Trim Tab System comes with a పరిమిత జీవితకాల వారంటీ for the electric actuators, provided by the manufacturer. For warranty claims, technical support, or any inquiries, please refer to the contact information provided in your product packaging or visit the official Bennett Marine webసైట్.

మీరు కూడా సందర్శించవచ్చు Bennett Marine Store on Amazon అదనపు ఉత్పత్తి సమాచారం మరియు మద్దతు వనరుల కోసం.