1. పరిచయం మరియు అనుకూలత
This manual provides detailed instructions for the installation, operation, and maintenance of the wellye RX23 12V Bluetooth Remote Control and Receiver Kit, designed for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper functionality and safety.
1.1 అనుకూలత తనిఖీ
To ensure this control box fits your specific ride-on car, open the existing control box in your electric ride-on car and compare its appearance and model number. This kit is compatible if the appearance and the model number (RX23 12V) match your original unit.
చిత్రం 1.1: ముగిసిందిview of the wellye RX23 12V Bluetooth Remote Control and Receiver Kit, showing both the remote control and the receiver unit.
చిత్రం 1.2: క్లోజప్ view of the wellye RX23 12V receiver unit, highlighting its connectors and casing.
Image 1.3: The wellye RX23 12V receiver unit, showing the "RX23 12V" label on its side, crucial for compatibility verification.
2. భద్రతా సమాచారం
For external use only. Keep away from naked flame or direct heat sources. This product is intended for use with children's ride-on toys. Adult supervision is recommended during installation and operation.
3. సెటప్ మరియు ఇన్స్టాలేషన్
3.1 రిమోట్ కంట్రోల్ బ్యాటరీ ఇన్స్టాలేషన్
The remote control requires two AAA 1.5V batteries. Use a Phillips screwdriver to unscrew the screw on the back of the remote control. Open the battery cover, install the batteries, ensuring correct positive (+) and negative (-) polarity, then close the battery cover and secure the screw.
- పాత మరియు కొత్త బ్యాటరీలను కలపవద్దు.
- వివిధ రకాల బ్యాటరీలను కలపవద్దు.
- Remove exhausted batteries from the remote control promptly.
చిత్రం 3.1: వెనుక view of the remote control, showing the battery compartment and basic operation instructions.
3.2 Frequency Matching (Pairing)
Frequency matching is required for the first use or after replacing the remote control batteries. If the matching is unsuccessful, turn off the car's power and repeat steps 2 and 3.
- Install two AAA 1.5V batteries into the remote control, observing correct polarity. The indicator light will flash three times, confirming correct battery installation.
- Press and hold the frequency key (often labeled "car select" or "S") on the remote control for approximately 2 seconds. The indicator light on the remote will begin to flash.
- Turn on the power supply of the ride-on car. The indicator light on the remote control will turn off, indicating successful frequency matching.
- If the indicator light does not turn off, the matching was unsuccessful. Turn off the car's power and repeat steps 2 and 3.
4. ఆపరేటింగ్ సూచనలు
Once the remote control and receiver are successfully paired, you can operate the ride-on car using the remote control. The remote control will enter power-saving mode if not operated for 10 seconds, and the indicator light will turn off.
4.1 రిమోట్ కంట్రోల్ బటన్ వివరణ
చిత్రం 4.1: క్లోజప్ view of the wellye remote control, showing the various control buttons.
- ▲ (పైకి బాణం): Moves the car forward.
- ▼ (క్రింది బాణం): Moves the car backward.
- ◀ (Left Arrow): Turns the car left.
- ▶ (Right Arrow): Turns the car right.
- S (Speed/Select): Controls speed settings or acts as the frequency matching button.
- P (Emergency Brake): Press this button to engage the emergency brake. The car's running function will stop. Press again to release.
5. నిర్వహణ
Regular maintenance ensures the longevity and proper functioning of your remote control and receiver kit.
- బ్యాటరీ సంరక్షణ: Always use fresh batteries of the same type. Remove batteries if the remote control will not be used for an extended period to prevent leakage.
- శుభ్రపరచడం: Wipe the remote control and receiver with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- నిల్వ: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures.
6. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Remote control not responding / Car not moving |
|
|
| Remote control indicator light flashes continuously after battery installation | Frequency matching is required. | Perform frequency matching (refer to Section 3.2). |
| Remote control indicator light does not turn off after attempting frequency matching | Frequency matching failed. | Turn off the car's power, then repeat steps 2 and 3 of the frequency matching process (Section 3.2). |
| Car moves erratically or in wrong direction | Wiring issue or faulty receiver. | Verify all wiring connections to the receiver are secure and correctly installed. If issues persist, the receiver may be faulty and require replacement. |
7. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | WEELYE RX23 12V 7-pin single-side |
| వాల్యూమ్tage | 12V |
| కనెక్టివిటీ | 2.4G బ్లూటూత్ |
| రిమోట్ కంట్రోల్ బ్యాటరీలు | 2 x AAA 1.5V (చేర్చబడలేదు) |
| ఉత్పత్తి కొలతలు | 3.5 x 3.5 x 2 అంగుళాలు (రిసీవర్) |
| వస్తువు బరువు | 4.7 ఔన్సులు |
| తయారీదారు | బాగా |
8. వారంటీ మరియు మద్దతు
For technical support or inquiries regarding this product, please contact wellye customer service. Refer to your purchase documentation for specific warranty details, as warranty terms may vary by retailer and region.
For more information about wellye products, visit the wellye brand store on Amazon.
