1. ఉత్పత్తి ముగిసిందిview
The MOOG 512593 Wheel Bearing and Hub Assembly is engineered for superior performance and durability in a wide range of foreign and domestic vehicles. Designed with advanced features, this assembly ensures longer life, smoother operation, and optimal ABS performance, providing a reliable solution for your vehicle's wheel system.
మూర్తి 1: ముందు view of the MOOG 512593 Wheel Bearing and Hub Assembly.
మూర్తి 2: వైపు view of the MOOG 512593 Wheel Bearing and Hub Assembly, showing the mounting flange and studs.
చిత్రం 3: వెనుక view of the MOOG 512593 Wheel Bearing and Hub Assembly, highlighting the bearing and ABS sensor connection.
2. అనుకూలత
This MOOG 512593 Wheel Bearing and Hub Assembly is compatible with the following vehicle models:
- 2018-2022 బ్యూక్ ఎన్క్లేవ్
- 2017-2022 Cadillac XT5
- 2020-2022 Cadillac XT6
- 2018-2022 చేవ్రొలెట్ ట్రావర్స్
- 2017-2022 GMC అకాడియా
Important: Before purchasing, ensure this part fits your specific vehicle. Verify all vehicle information (year, make, model, engine, and trim) for compatibility and check any qualifier notes.
3 కీ ఫీచర్లు
The MOOG 512593 Hub Assembly incorporates several design enhancements for improved performance and longevity:
- Innovative Roll Form Design: Ensures consistent and optimal preload for reliable operation.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements, delivering superior performance and minimizing noise and vibration.
- మెరుగైన సీలింగ్: Engineered with improved seals to protect against premature wear and lubricant breakdown, even in harsh conditions. This includes:
- Molded grommet to protect ABS functionality.
- Improved quad-lip inboard seal.
- Improved 3-lip primary outboard seal.
- Grime Defense outboard seal.
- Abrasion-Resistant ABS Cord: Designed for durability and reliable ABS signal transmission.
- Wheel Studs with Protective Coating: Provides added corrosion resistance and longevity.
Figure 4: Diagram illustrating key features of the MOOG Hub Assembly, including the ABS cord, roll form design, quad lip seal, precision matched components, and protective coating on wheel studs.
చిత్రం 5: క్రాస్-సెక్షన్ view of a bearing, highlighting the internal components and precision matching.
4. ఇన్స్టాలేషన్ గైడ్
Installation of the MOOG 512593 Wheel Bearing and Hub Assembly should be performed by a qualified technician using appropriate tools and safety procedures. Refer to your vehicle's specific service manual for detailed, step-by-step instructions.
General Steps (Consult Vehicle Service Manual for Details):
- వాహనాన్ని సురక్షితంగా ఎత్తండి మరియు మద్దతు ఇవ్వండి.
- Remove the wheel and brake caliper assembly.
- Disconnect the ABS sensor wire (if applicable).
- Remove the old hub assembly.
- మౌంటు ఉపరితలాన్ని పూర్తిగా శుభ్రం చేయండి.
- Install the new MOOG 512593 Hub Assembly, ensuring proper alignment.
- Reconnect the ABS sensor wire.
- Reinstall the brake caliper assembly and wheel.
- Torque all fasteners to manufacturer specifications.
- Lower the vehicle and perform a test drive to ensure proper function.
Figure 6: Illustration of a hub assembly's location within a vehicle's suspension system.
5. ఆపరేటింగ్ పరిగణనలు
Once installed, the MOOG 512593 Wheel Bearing and Hub Assembly operates as an integral part of your vehicle's wheel and braking system. No specific user operation is required beyond normal vehicle use. However, it is crucial to be aware of potential symptoms that may indicate an issue with the hub assembly.
6. నిర్వహణ
The MOOG 512593 Wheel Bearing and Hub Assembly is designed for maintenance-free operation. Regular inspection of your vehicle's suspension and wheel components during routine service is recommended to identify any signs of wear or damage early. Pay attention to:
- Unusual noises (grinding, humming, roaring) from the wheels.
- Vibration felt through the steering wheel or floorboard.
- Loose steering or poor handling.
- అసమాన టైర్ దుస్తులు.
- Illumination of the ABS warning light.
If any of these symptoms are observed, have your vehicle inspected by a qualified technician promptly.
7. ట్రబుల్షూటింగ్
Common symptoms of a failing wheel bearing and hub assembly include:
లక్షణం 1: Noise (e.g., grinding, humming, roaring) that changes with vehicle speed or turning.
లక్షణం 2: Vibration felt in the steering wheel, floorboard, or seat.
లక్షణం 3: ABS warning light illumination (due to sensor issues or damage).
లక్షణం 4: Uneven or abnormal tire wear.
If you experience any of these symptoms, it is recommended to have your vehicle inspected by a certified mechanic to diagnose and address the issue.
8. స్పెసిఫికేషన్లు
| గుణం | విలువ |
|---|---|
| తయారీదారు | MOOG Hub Assemblies |
| బ్రాండ్ | మూగ్ |
| మోడల్ సంఖ్య | 512593 |
| వస్తువు బరువు | 9.39 పౌండ్లు |
| ఉత్పత్తి కొలతలు | 6 x 5.88 x 3.75 అంగుళాలు |
| బాహ్య | మెషిన్ చేయబడింది |
| మొదట అందుబాటులో ఉన్న తేదీ | మే 14, 2012 |
9. పెట్టెలో ఏముంది
The MOOG 512593 Wheel Bearing and Hub Assembly package includes:
- 1 x Wheel Bearing and Hub Assembly
10. వారంటీ మరియు మద్దతు
For warranty information and technical support regarding your MOOG 512593 Wheel Bearing and Hub Assembly, please refer to the official MOOG webసైట్ లేదా వారి కస్టమర్ సర్వీస్ను నేరుగా సంప్రదించండి. ఏవైనా వారంటీ క్లెయిమ్ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.
You can visit the official MOOG Store for more information: MOOG Store on Amazon
