DXQ FL-40GMB12V000001

DXQ FL-40 హై ప్రెజర్ డయాఫ్రమ్ పంప్ యూజర్ మాన్యువల్

Model: FL-40GMB12V000001 | Brand: DXQ

1. పరిచయం

Thank you for choosing the DXQ FL-40 High Pressure Diaphragm Pump. This manual provides essential information for the proper installation, operation, and maintenance of your pump. Please read it thoroughly before use to ensure safe and efficient performance.

DXQ FL-40 High Pressure Diaphragm Pump with clear filter housing

Figure 1: DXQ FL-40 High Pressure Diaphragm Pump

ముఖ్య లక్షణాలు:

  • మన్నికైన పదార్థం: Constructed from high-strength cast iron with powder coating, ensuring waterproof and rust-resistant properties for long-term use.
  • Powerful Automatic Pressure Pump: A fully automatic self-priming pump with a maximum flow rate of 17 L/min and an inlet PSI set to Max 40PSI (2.76Bar). Operates on 12V AC power.
  • భద్రతా రక్షణ: Features built-in thermal protection and automatic pressure protection. Designed for long service life with quiet operation and no leakage.
  • త్వరిత సంస్థాపన: Compact size, lightweight design, and stable performance facilitate instant assembly.
  • బహుముఖ అప్లికేషన్లు: Suitable for various uses including food and beverage filling, liquid transfer, clean machine requirements, road work, and cooling systems.
Collage of various applications for the pump including kitchen sink, water heater, soda dispenser, agricultural drone, pressure washing, and solar water heater

Figure 2: Wide range of applications for the FL-40 pump

2. భద్రతా సూచనలు

Always observe the following safety precautions to prevent injury or damage to the pump.

  • విద్యుత్ సరఫరా పంపు వాల్యూమ్‌కు సరిపోలుతుందని నిర్ధారించుకోండి.tagఇ అవసరాలు (12V).
  • Do not operate the pump with damaged wiring or connections.
  • Avoid running the pump dry for extended periods, as this can cause damage.
  • Ensure proper ventilation around the pump during operation.
  • Do not use the pump for flammable liquids or in explosive atmospheres.
  • చేతులు మరియు వదులుగా ఉన్న దుస్తులను కదిలే భాగాలకు దూరంగా ఉంచండి.
  • ఏదైనా నిర్వహణ లేదా ట్రబుల్షూటింగ్ చేసే ముందు విద్యుత్తును డిస్‌కనెక్ట్ చేయండి.
  • The pump features built-in thermal protection to prevent overheating. If the pump stops unexpectedly, allow it to cool down before restarting.
Diagram showing the internal motor of the pump with an arrow indicating thermal protection

Figure 3: Thermal Protection feature of the pump

3. చేర్చబడిన భాగాలు

The DXQ FL-40 High Pressure Diaphragm Pump package typically includes the following components:

  • 1 x Diaphragm Water Pump
  • 1 x ఫిల్టర్
  • 3 x Fittings (various types for connection)
క్లోజ్-అప్ view of the included filter and various hose fittings

Figure 4: Included filter and fittings

Labeled diagram of the pump showing water outlet connector, stable bracket, pump wire, and water inlet connector

Figure 5: Key components and connections of the pump

4. సెటప్ మరియు ఇన్‌స్టాలేషన్

Follow these steps for quick and proper installation of your diaphragm pump:

  1. మౌంటు: Securely mount the pump in a dry, well-ventilated area using the stable bracket. Ensure it is on a flat, stable surface to minimize vibration.
  2. ఇన్లెట్ కనెక్షన్: Connect the water inlet hose to the designated inlet port (often labeled 'Inlet' or indicated by an arrow pointing towards the pump). It is recommended to install the included filter on the inlet line to prevent debris from entering the pump.
  3. అవుట్‌లెట్ కనెక్షన్: Connect the water outlet hose to the designated outlet port (often labeled 'Outlet' or indicated by an arrow pointing away from the pump).
  4. విద్యుత్ కనెక్షన్: Connect the pump's power wires to a 12V DC power source. Ensure correct polarity (red wire to positive, black wire to negative). It is advisable to install an inline fuse for protection.
  5. పంపును ప్రైమ్ చేయండి (అవసరమైతే): While this is a self-priming pump, ensuring the inlet line is filled with water before the first use can aid in faster priming.
  6. లీక్‌ల కోసం తనిఖీ చేయండి: After all connections are made, slowly introduce water into the system and check for any leaks at the fittings. Tighten connections as needed.
Diagram showing the pump connected to inlet and outlet hoses with a filter on the inlet, and an arrow indicating water flow direction

Figure 6: Fast assembly and water flow direction

5. ఆపరేషన్

Once installed, operating the DXQ FL-40 pump is straightforward:

  • పంపును ప్రారంభించడం: Ensure all connections are secure and the power source is ready. Apply 12V DC power to the pump. The pump will begin to operate and self-prime.
  • ఆటోమేటిక్ ఆపరేషన్: The pump is designed to automatically turn on when water is demanded (e.g., a faucet is opened) and turn off when the demand stops and pressure builds up in the system.
  • Flow and Pressure: The pump delivers a maximum flow of 17 L/min and maintains pressure up to 40 PSI.
  • పర్యవేక్షణ: Periodically check the pump for unusual noises, vibrations, or leaks during operation.

6. నిర్వహణ

Regular maintenance ensures the longevity and optimal performance of your pump:

  • ఫిల్టర్ క్లీనింగ్: Regularly inspect and clean the inlet filter to prevent clogging and maintain optimal flow. Disconnect power, remove the filter housing, clean the mesh screen, and reassemble.
Comparison image showing the included metal filter on the left and a different type of filter on the right

Figure 7: The included metal filter for debris prevention

  • కనెక్షన్ తనిఖీ: Periodically check all hose and electrical connections for tightness and signs of wear.
  • శీతాకాలం (వర్తిస్తే): If the pump is used in an environment where temperatures drop below freezing, ensure it is drained completely or protected with RV antifreeze to prevent damage from freezing water.
  • సాధారణ శుభ్రపరచడం: Keep the exterior of the pump clean and free from dirt and debris.

7. ట్రబుల్షూటింగ్

సాధారణ సమస్యలు మరియు వాటి పరిష్కారాల కోసం క్రింది పట్టికను చూడండి:

సమస్యసాధ్యమైన కారణంపరిష్కారం
పంప్ నడవదుNo power; Loose wiring; Blown fuse; Motor faultవిద్యుత్ సరఫరాను తనిఖీ చేయండి; కనెక్షన్లను భద్రపరచండి; ఫ్యూజ్‌ను మార్చండి; మద్దతును సంప్రదించండి
తక్కువ ప్రవాహం లేదా పీడనంClogged inlet filter; Kinked or restricted hose; Air in system; Low voltageClean filter; Straighten hose; Bleed air from system; Check power supply
పంప్ నిరంతరం నడుస్తుందిLeak in system; Pressure switch malfunction; Open faucetCheck for leaks and repair; Contact support for pressure switch; Close all faucets
పంప్ ధ్వనించేదివ్యవస్థలో గాలి; వదులుగా అమర్చడం; పంపులో శిథిలాలుBleed air; Secure mounting; Disconnect power and inspect pump (if safe)
పంపు నుండి నీరు లీక్ అవుతుందిLoose fittings; Damaged seals/diaphragmTighten fittings; Contact support for seal replacement

8. సాంకేతిక లక్షణాలు

Detailed specifications for the DXQ FL-40 Diaphragm Pump:

స్పెసిఫికేషన్విలువ
తయారీదారుBananaB (DXQ)
మోడల్ సంఖ్యFL-40GMB12V000001
ఉత్పత్తి కొలతలు36 x 12 x 10 సెం.మీ (సుమారుగా 14.2 x 4.7 x 3.9 అంగుళాలు)
బరువు2.4 కిలోలు (సుమారు 5.3 పౌండ్లు)
రంగునలుపు
శైలిడయాఫ్రాగమ్
మెటీరియల్తారాగణం ఇనుము
శక్తి మూలం12V DC
వాల్యూమ్tage12 వోల్ట్లు
గరిష్ట ప్రవాహం రేటునిమిషానికి 17 లీటర్లు
గరిష్ట ఒత్తిడి40 PSI (2.76 బార్)
గరిష్ట లిఫ్ట్ ఎత్తు2 మీటర్లు
బ్యాటరీలు చేర్చబడ్డాయా?నం
బ్యాటరీలు అవసరమా?నం
Image showing the dimensions of the pump: 10 inches long, 4.3 inches wide, and 4.3 inches high

Figure 8: Pump dimensions

Close-up of the pump highlighting its cast iron material construction

Figure 9: Durable Cast Iron Material

9. వారంటీ సమాచారం

For specific warranty terms and conditions, please refer to the product packaging or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

10. కస్టమర్ మద్దతు

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or manufacturer through the platform where you purchased the product. Provide your model number and a detailed description of the issue for faster service.

సంబంధిత పత్రాలు - FL-40GMB12V000001

ముందుగాview 2007 నిస్సాన్ ఫ్రాంటియర్ ఇంధన వ్యవస్థ సేవా మాన్యువల్
2007 నిస్సాన్ ఫ్రాంటియర్ కోసం సమగ్ర సేవా మాన్యువల్, ఇంధన వ్యవస్థ కోసం జాగ్రత్తలు, తయారీ, ఇంధన ట్యాంక్, ఇంధన పంపు, ఇంధన ఫిల్టర్ మరియు సెన్సార్ యూనిట్‌తో సహా విధానాలను వివరిస్తుంది. తొలగింపు, సంస్థాపన, వేరుచేయడం, అసెంబ్లీ మరియు స్పెసిఫికేషన్‌లను కవర్ చేస్తుంది.
ముందుగాview ఫుజినాన్ లెన్స్ మౌంట్ రొటేషన్ అడ్జస్ట్‌మెంట్ గైడ్ మరియు స్పెసిఫికేషన్లు
ఫుజినాన్ కెమెరా లెన్స్ మౌంట్‌ల భ్రమణాన్ని ఎలా సర్దుబాటు చేయాలో వివరణాత్మక గైడ్, దశల వారీ సూచనలు మరియు వాటి సెన్సార్ పరిమాణాలు మరియు టార్క్ స్పెసిఫికేషన్‌లతో కూడిన లెన్స్ మోడల్‌ల సమగ్ర జాబితాతో సహా.
ముందుగాview ఫీనిక్స్ కాంటాక్ట్ FL స్విచ్ 1000 సిరీస్ యూజర్ మాన్యువల్
ఈ యూజర్ మాన్యువల్ ఫీనిక్స్ కాంటాక్ట్ యొక్క FL SWITCH 1000 సిరీస్ అన్‌మానేజ్డ్ నారో ఈథర్నెట్ స్విచ్‌లకు సమగ్ర మార్గదర్శకత్వాన్ని అందిస్తుంది. ఇది వివిధ మోడళ్లకు భద్రత, ఇన్‌స్టాలేషన్, ఆపరేషన్, సాంకేతిక డేటా మరియు ఆర్డరింగ్‌పై అవసరమైన సమాచారాన్ని కవర్ చేస్తుంది, పారిశ్రామిక నెట్‌వర్కింగ్ అప్లికేషన్‌లలో సరైన విస్తరణ మరియు వినియోగాన్ని నిర్ధారిస్తుంది.
ముందుగాview Titus FlowBar Architectural Linear Diffuser Installation and Operation Manual
Comprehensive installation and operation manual for Titus FlowBar architectural linear diffusers, models FL-10, FL-15, FL-20, FL-25, and FL-30. Covers hard ceiling, acoustical ceiling, and field cutting procedures.
ముందుగాview Titus FlowBar Mounting Hardware: Clips, Hangers, and Compatibility Guide
Comprehensive guide to Titus FlowBar mounting hardware, including UHC, USH, H1-H5, WC3, WC4, SS1, and SC1 clips. Features detailed descriptions, diagrams, and compatibility charts for HVAC installations.
ముందుగాview VEVOR Golf Net FL-004/FL-05/FL-05A/FL-P255 User Manual and Warranty
Comprehensive guide for VEVOR Golf Net models FL-004, FL-05, FL-05A, and FL-P255. Includes safety warnings, assembly instructions, cleaning, storage tips, and warranty information.