1. పరిచయం
The Onvis Smart Motion Sensor SMS2 is a multi-functional device designed to enhance your smart home experience. It integrates motion detection, temperature sensing, and humidity monitoring into a single unit. Utilizing Thread technology, it offers responsive and efficient communication within your Apple HomeKit ecosystem. This manual provides detailed instructions for setup, operation, and maintenance of your SMS2 sensor.
Image: The Onvis Smart Motion Sensor SMS2, highlighting its compatibility with Apple HomeKit and built-on Thread technology.
2. ప్యాకేజీ విషయాలు
Please verify that all items are present:
- Onvis స్మార్ట్ మోషన్ సెన్సార్ SMS2
- Mounting accessories (screws, adhesive tape)
- వినియోగదారు మాన్యువల్ (ఈ పత్రం)
Note: 2 AAA batteries are required and not included in the package.
3. సెటప్ మరియు ఇన్స్టాలేషన్
3.1 బ్యాటరీ ఇన్స్టాలేషన్
- Gently open the battery compartment cover on the back of the Onvis SMS2 sensor.
- Insert two (2) AAA alkaline batteries, ensuring correct polarity (+/-).
- బ్యాటరీ కంపార్ట్మెంట్ కవర్ను సురక్షితంగా మూసివేయండి.
3.2 సెన్సార్ను మౌంట్ చేయడం
The Onvis SMS2 sensor can be mounted using either the included adhesive tape or screws.
- అంటుకునే మౌంటు: Clean the desired surface thoroughly. Remove the protective film from the adhesive tape and firmly press the sensor onto the surface for at least 30 seconds.
- స్క్రూ మౌంటు: Use the provided screws and anchors to secure the sensor to a wall or ceiling. Ensure the sensor is positioned to cover the desired detection area.
Image: The Onvis Smart Motion Sensor SMS2 discreetly mounted on a wall in a modern living room setting.
3.3 Pairing with Apple HomeKit (Thread Required)
The Onvis SMS2 sensor requires an Apple HomeKit Thread Border Router (e.g., HomePod mini, Apple TV 4K A2843/A2169, HomePod 2nd Gen) for full functionality and Thread connectivity. Ensure your iOS device is running iOS 17.4 or above.
- తెరవండి Apple Home యాప్ మీ iOS పరికరంలో.
- నొక్కండి "+" ఎగువ కుడి మూలలో ఉన్న చిహ్నాన్ని ఎంచుకుని, "Add Accessory".
- Scan the HomeKit setup code located on the back of the sensor or in the manual.
- Follow the on-screen prompts to assign the sensor to a room and configure its settings.
- The sensor will automatically connect via Thread if a compatible HomeKit Thread Border Router is present and configured.
Image: An iPhone screen showing a HomeKit notification for motion detected by an "Entrance Motion Sensor," with the Onvis SMS2 sensor positioned next to the phone.
4. ఆపరేషన్
4.1 మోషన్ డిటెక్షన్
The Onvis SMS2 sensor detects motion within its range (up to 7 meters / 25 feet with 120° coverage). When motion is detected, it can trigger automations and send real-time notifications to your Apple Home app.
- రియల్ టైమ్ నోటిఫికేషన్లు: Receive instant alerts on your iOS device when motion is detected, even when you are away from home (requires a HomeKit hub).
- Smart Activation & Deactivation: Customize motion alerts and detection schedules within the Onvis Home app or Apple Home app to align with your daily routine.
- ఆటోమేషన్లు: Use motion detection to trigger other HomeKit accessories, such as turning on lights when you enter a room.
Image: A woman opening a door, with the Onvis Smart Motion Sensor SMS2 visible on the wall, illustrating its use in triggering smart lights upon entry.
Image: A split image depicting a person in a balaclava on one side and a smartphone receiving an "Instant notification when movement detected" on the other, demonstrating security alerts.
4.2 ఉష్ణోగ్రత మరియు తేమ పర్యవేక్షణ
The SMS2 sensor includes a built-in hygrometer and thermometer, providing real-time environmental data.
- యాక్సెస్ డేటా: View current temperature and humidity readings through the Apple Home app or by asking Siri.
- Historical Records: The Onvis Home app allows you to check historical temperature, humidity, and motion records for up to 32 days.
- Automation Triggers: Use temperature and humidity levels as conditions for HomeKit automations (e.g., turn on a fan if temperature exceeds a certain threshold).
Image: A baby sleeping in a crib, with the Onvis Smart Motion Sensor SMS2 on a nearby bedside table. A speech bubble indicates a Siri command: "Hey Siri, what's the humidity in the room?" and the response: "The humidity in the room is 50%."
4.3 Light Detection
The sensor also features a light detection capability, which can be used to inform automations.
- పగటి సెన్సార్: Configure automations to only activate lights when it's dark, preventing unnecessary lighting during daylight hours.
Image: The Onvis Smart Motion Sensor SMS2 positioned near a window with curtains, demonstrating its daylight sensing capability to control lighting.
5. నిర్వహణ
5.1 బ్యాటరీ భర్తీ
The Onvis SMS2 sensor uses two (2) AAA alkaline batteries. The estimated battery life is approximately 8760 hours (1 year). When the battery level is low, you will receive a notification in the Apple Home app.
- బ్యాటరీ కంపార్ట్మెంట్ కవర్ తెరవండి.
- పాత బ్యాటరీలను తొలగించండి.
- Insert two new AAA alkaline batteries, observing correct polarity.
- బ్యాటరీ కంపార్ట్మెంట్ కవర్ను మూసివేయండి.
5.2 శుభ్రపరచడం
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as this may damage the device.
6. ట్రబుల్షూటింగ్
- సెన్సార్ స్పందించడం లేదు:
- బ్యాటరీ స్థాయిని తనిఖీ చేయండి మరియు అవసరమైతే భర్తీ చేయండి.
- Ensure the sensor is within range of your HomeKit Thread Border Router.
- Verify your HomeKit Thread Border Router (e.g., HomePod mini, Apple TV 4K) is powered on and connected to your network.
- Restart your HomeKit Thread Border Router.
- HomeKit automation issues (iOS 17.2 specific):
- If motion sensor status is not appearing as an automation condition in the iOS Home app (version 17.2), set up motion-based HomeKit automations in the Onvis Home app or other compatible 3rd party HomeKit apps. These configurations will sync to the HomeKit system.
- సరికాని ఉష్ణోగ్రత/తేమ రీడింగ్లు:
- Ensure the sensor is not placed near heat sources, direct sunlight, or in areas with high airflow that could affect readings.
- Allow some time for the sensor to stabilize after placement.
- Difficulty pairing with HomeKit:
- మీ iOS పరికరం iOS 17.4 లేదా అంతకంటే ఎక్కువ వెర్షన్ను నడుపుతోందని నిర్ధారించుకోండి.
- Confirm you have a compatible HomeKit Thread Border Router.
- Reset the sensor (refer to manufacturer's instructions for specific reset procedure, usually involves holding a button).
7. స్పెసిఫికేషన్లు
| బ్రాండ్ | ఒన్విస్ |
| మోడల్ సంఖ్య | SMS2 |
| రంగు | తెలుపు |
| శక్తి మూలం | బ్యాటరీ ఆధారితమైనది |
| బ్యాటరీ రకం | 2 AAA ఆల్కలీన్ బ్యాటరీలు (చేర్చబడలేదు) |
| బ్యాటరీ లైఫ్ | Approx. 8760 hours (1 year) |
| వస్తువు బరువు | 3.52 ఔన్సులు |
| ఉత్పత్తి కొలతలు | 2.5 x 1.9 x 1.45 అంగుళాలు |
| గరిష్ట మోషన్ డిటెక్షన్ పరిధి | 7 మీటర్లు (సుమారు 25 అడుగులు) |
| Motion Detection Coverage | 120 డిగ్రీలు |
| ఆపరేటింగ్ ఉష్ణోగ్రత పరిధి | 14°F నుండి 113°F (-10°C నుండి 45°C) |
| తేమ పరిధి | 5% నుండి 95% (కన్డెన్సింగ్) |
| మౌంటు రకం | వాల్ మౌంట్ |
| అనుకూల పరికరాలు | Apple HomeKit (iOS 17.4 and above required) |
| కనెక్టివిటీ | Thread (requires HomeKit Thread Border Router) |
8. వారంటీ మరియు మద్దతు
For warranty information and technical support, please refer to the official Onvis website or contact Onvis customer service directly. Keep your purchase receipt as proof of purchase.
ఆన్లైన్ మద్దతు: సందర్శించండి Onvis Store on Amazon అదనపు వనరులు మరియు సంప్రదింపు సమాచారం కోసం.
