BNT డమ్మీ ఫేక్ సెక్యూరిటీ కెమెరా (మోడల్ BNT-K8FaCam-2PW) ఇన్‌స్ట్రక్షన్ మాన్యువల్

1. పరిచయం

The BNT Dummy Fake Security Camera is designed to provide a realistic visual deterrent against potential intruders. Its appearance closely mimics that of a functional surveillance camera, aiming to reduce the likelihood of criminal activity by creating the impression of active monitoring. This manual provides essential information for the proper setup, operation, and maintenance of your dummy camera.

Image 1.1: Two BNT white dummy fake security cameras, showcasing their realistic design.

2. పెట్టెలో ఏముంది

Upon opening your package, you should find the following components:

• BNT Bullet Simulation Fake Camera (White) x 2
• సంస్థాపన కోసం మరలు
• వినియోగదారు మాన్యువల్ (ఈ పత్రం)
• Warning Security Alert Sticker Decal x 2

Image 2.1: Package contents showing two dummy cameras, warning stickers, and screws.

3 ఫీచర్లు

• వాస్తవిక డిజైన్: Mimics the appearance of a real surveillance camera.
• మెరుస్తున్న LED లైట్: Features a built-in red LED light that illuminates at night, simulating active recording.
• ఫోటోఎలెక్ట్రిక్ సెన్సార్: Automatically activates the red LED light in low-light conditions.
• మన్నికైన నిర్మాణం: Made from Acrylonitrile Butadiene Styrene (ABS) for indoor and outdoor use.
• వాతావరణ నిరోధకం: IP65 International Protection Rating ensures resistance to water.
• సులభమైన సంస్థాపన: No wiring required, mounts easily to ceilings or walls.
• సర్దుబాటు కోణం: Features 2-axis rotation for flexible positioning (360-degree rotation, 90-degree tilt).
• శక్తి మూలం: 2 AA బ్యాటరీలపై పనిచేస్తుంది (చేర్చబడలేదు).

Image 3.1: Close-up of the dummy camera's front, showing the dummy lens, red LED, and rotation capabilities.

4. సెటప్ & ఇన్‌స్టాలేషన్

4.1. బ్యాటరీ ఇన్‌స్టాలేషన్

1. Locate the battery compartment on the camera. This is typically found by sliding open the back cover.
2. సరైన ధ్రువణతను (+/-) నిర్ధారించుకోవడానికి, కంపార్ట్‌మెంట్‌లోకి 2 AA బ్యాటరీలను (చేర్చబడలేదు) చొప్పించండి.
3. బ్యాటరీ కంపార్ట్‌మెంట్‌ను సురక్షితంగా మూసివేయండి.

Image 4.1: Illustration of battery insertion into the dummy camera.

4.2. కెమెరాను మౌంట్ చేయడం

The camera can be easily installed on a ceiling or wall using the provided screws. No complex wiring is necessary.

1. Choose a suitable location for installation, considering visibility and desired deterrent effect.
2. Position the mounting base against the surface and mark the screw holes.
3. Drill pilot holes if necessary, then secure the mounting base with the provided screws.
4. కెమెరాను మౌంట్ చేయబడిన బేస్‌కు అటాచ్ చేయండి.
5. Adjust the camera's angle using its 2-axis rotation feature to achieve the desired coverage.

Video: BNT Dummy Fake Security Camera Overview

వీడియో 4.2.1: ఈ వీడియో సాధారణ ఓవర్‌ను అందిస్తుందిview of the BNT Dummy Fake Security Camera, highlighting its features and realistic appearance.

Video: Protecting Property with Fake Cameras

Video 4.2.2: This video demonstrates how fake cameras can be used to enhance property security and deter potential threats.

5. ఆపరేటింగ్ సూచనలు

The BNT Dummy Fake Security Camera is designed for simple, autonomous operation:

• Once batteries are installed, the built-in photoelectric sensor will detect ambient light levels.
• During daylight hours, the red LED light will remain off.
• As darkness falls, the photoelectric sensor will automatically activate the red LED light, causing it to illuminate. This simulates the operation of a real security camera's night vision or recording indicator.
• The camera provides 24/7 visual deterrence without any manual intervention after initial setup.

Image 5.1: The dummy camera's red LED light is active at night, providing a visual deterrent.

6. నిర్వహణ

• బ్యాటరీ భర్తీ: When the red LED light dims or stops illuminating, it is time to replace the batteries. Ensure to use high-quality AA batteries to prevent leakage and damage to the battery case.
• పర్యావరణ పరిరక్షణ: When replacing batteries, take care to avoid exposing the internal components to rain or moisture to maintain the lifespan of the battery case.
• పారవేయడం: Please dispose of used batteries properly according to local regulations to protect the environment.
• శుభ్రపరచడం: Periodically wipe the camera's exterior with a soft, damp దుమ్ము మరియు చెత్తను తొలగించడానికి వస్త్రం. కఠినమైన రసాయనాలను ఉపయోగించడం మానుకోండి.

7. ట్రబుల్షూటింగ్

7.1. LED Light Not Illuminating at Night

• బ్యాటరీలను తనిఖీ చేయండి: Ensure that 2 AA batteries are correctly installed and are not depleted. Replace if necessary.
• Test Photoelectric Sensor: In a dark environment, cover the LED light with your hand. If the red LED light turns on, the product is functioning correctly. If it does not, check battery installation again.
• పర్యావరణ కారకాలు: Ensure the camera is not installed in an area with ambient light at night (e.g., streetlights, porch lights) that might prevent the photoelectric sensor from detecting sufficient darkness to activate the LED.

8. స్పెసిఫికేషన్లు

9. వారంటీ & సపోర్ట్

BNT provides reliable 24-month after-sales service for this product. If you have any questions, concerns, or require assistance with your BNT Dummy Fake Security Camera, please contact our dedicated customer service team. We are committed to ensuring your satisfaction.