Amico PD-1711

Amico 3 Head LED Security Light with Motion Sensor (Model PD-1711)

Brand: Amico | Model: PD-1711

1. పరిచయం

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Amico 3 Head LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and adherence to safety guidelines are crucial for optimal performance and user safety.

భద్రతా సమాచారం

2. ఉత్పత్తి లక్షణాలు

The Amico 3 Head LED Security Light is designed for outdoor use, offering adjustable lighting and motion detection capabilities.

Amico 3-in-1 LED Security Light with key features
పైగాview of the Amico 3-in-1 LED Security Light highlighting its 4000LM brightness, 5000K color temperature, IP65 waterproof rating, motion activation, 75ft detection range, and 180-degree wide range.

3. ప్యాకేజీ విషయాలు

ఇన్‌స్టాలేషన్ ప్రారంభించే ముందు అన్ని భాగాలు ఉన్నాయని నిర్ధారించుకోండి:

4. ఇన్‌స్టాలేషన్ సూచనలు

Follow these steps for a secure and functional installation. Ensure power is OFF at the circuit breaker before starting.

  1. మౌంటు ఉపరితలాన్ని సిద్ధం చేయండి: Ensure the junction box is securely installed and accessible.
  2. మౌంటు బ్రాకెట్‌ను ఇన్‌స్టాల్ చేయండి: Fasten the provided mounting bracket to the existing junction box using the supplied screws. Ensure it is firmly attached.
  3. Pass Wires Through EVA Pad: Carefully thread the electrical wires from the light fixture through the center hole of the EVA pad. This pad helps create a waterproof seal.
  4. వైర్ కనెక్షన్లు: Connect the wires from the light fixture to the corresponding wires from the junction box using the wire nuts.
    • Green wire (from light) to Green wire (ground from junction box)
    • Black wire (from light) to Black wire (hot from junction box)
    • White wire (from light) to White wire (neutral from junction box)

    Note: Improper wiring may cause the light to be slightly bright even when off.

  5. లైట్ ఫిక్చర్‌ను మౌంట్ చేయండి: Align the light fixture with the mounting bracket. Pass the screw through the hole on the light body, align with the hole in the mounting bracket, and tighten securely.
  6. Seal the Hole: Block the screw hole with the provided rubber plug to maintain the light's waterproof integrity.
  7. Adjust Light Heads and Sensor: Adjust the three light heads and the motion sensor to your desired angles for optimal coverage.
Diagram showing easy installation steps with wire connections
Visual guide for the easy installation process, including wire connections and mounting.

ఇన్‌స్టాలేషన్ వీడియో గైడ్

This video demonstrates the step-by-step installation process for the Amico Security Light, including mounting the bracket, wiring connections, and securing the light fixture.

5. ఆపరేటింగ్ మోడ్‌లు

The Amico Security Light offers three distinct operating modes, controlled by switches and dials on the motion sensor unit. Refer to the diagram below for control locations.

Diagram of the motion sensor controls showing Distance and Time settings
క్లోజ్-అప్ view of the motion sensor controls, indicating settings for Distance (H/M/L/D2D) and Time (TEST/1/3/10 Min).

మోడ్ సెట్టింగ్‌లు:

Operating Modes Video Guide

This video illustrates the three operational modes of the Amico Security Light: Always-on, Dusk-to-Dawn, and Motion-Activated, showing how to set each mode.

6. నిర్వహణ

Regular maintenance ensures the longevity and optimal performance of your security light.

7. ట్రబుల్షూటింగ్

If you encounter issues with your Amico Security Light, refer to the following common problems and solutions:

సమస్యసాధ్యమైన కారణంపరిష్కారం
లైట్ ఆన్ చేయదు.No power, incorrect wiring, sensor malfunction, ambient light too high.Check circuit breaker. Verify wiring connections. Adjust sensor sensitivity. Ensure D2D mode is not active during daylight.
కాంతి నిరంతరం వెలుగుతూనే ఉంటుంది.Sensor in 'TEST' mode, continuous motion, incorrect wiring.Check sensor mode settings. Ensure no constant motion in detection zone. Re-check wiring.
స్పష్టమైన కారణం లేకుండా కాంతి ఆన్ అవుతుంది.High sensor sensitivity, environmental factors (wind, small animals).Reduce sensor 'DISTANCE' setting. Clear obstructions from detection zone.
కాంతి మెరుస్తుంది లేదా మినుకుమినుకుమంటుంది.Loose wiring, power fluctuations, faulty unit.Check all wire connections. Consult an electrician for power issues. Contact customer support if problem persists.

8. స్పెసిఫికేషన్లు

ఫీచర్వివరాలు
బ్రాండ్అమికో
మోడల్ పేరుPD-1711
శక్తి మూలంకార్డెడ్ ఎలక్ట్రిక్
వాట్tage40 వాట్స్
ప్రకాశం4000 ల్యూమెన్స్
రంగు ఉష్ణోగ్రత5000 Kelvin (Day Light White)
మెటీరియల్అల్యూమినియం
నీటి నిరోధక స్థాయిIP65 (నీటి నిరోధకత)
మోషన్ సెన్సార్ కోణం180 డిగ్రీలు
మోషన్ డిటెక్షన్ దూరం75 అడుగుల వరకు
సంస్థాపన రకంవాల్ మౌంట్
ఉత్పత్తి కొలతలు13.8"లీ x 6"వా x 6.7"హ
వస్తువు బరువు2.51 పౌండ్లు

9. వారంటీ సమాచారం

The Amico 3 Head LED Security Light (Model PD-1711) comes with a 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or contact Amico customer support.

10. కస్టమర్ మద్దతు

For any questions, technical assistance, or warranty claims, please contact Amico customer support through the official Amico webసైట్ లేదా మీ ఉత్పత్తి ప్యాకేజింగ్‌లో అందించిన సంప్రదింపు సమాచారం.

సంబంధిత పత్రాలు - PD-1711

ముందుగాview అమికో 3-హెడ్ LED సెక్యూరిటీ లైట్ ఇన్‌స్టాలేషన్ మాన్యువల్
మోషన్ సెన్సార్‌తో కూడిన అమికో 3-హెడ్ LED సెక్యూరిటీ లైట్ కోసం ఇన్‌స్టాలేషన్ గైడ్, అడ్జస్టబుల్ ఫ్లడ్ లైట్, 40W, 4000LM, 5000K, మరియు IP65 వాటర్‌ప్రూఫ్ రేటింగ్‌ను అవుట్‌డోర్ వినియోగం కోసం కలిగి ఉంది.
ముందుగాview అమికో LED సెక్యూరిటీ ఫ్లడ్ లైట్ యూజర్ మాన్యువల్ మరియు ఇన్‌స్టాలేషన్ గైడ్
అమికో LED సెక్యూరిటీ ఫ్లడ్ లైట్ కోసం సమగ్ర యూజర్ మాన్యువల్, ఇన్‌స్టాలేషన్, భద్రత, సెన్సార్ సెట్టింగ్‌లు, ట్రబుల్షూటింగ్ మరియు కస్టమర్ సపోర్ట్‌ను కవర్ చేస్తుంది. 50W, 6000LM, 6500K డేలైట్, IP65 వాటర్‌ప్రూఫ్ మరియు అడ్జస్టబుల్ మోషన్ డిటెక్షన్ ఫీచర్లు.
ముందుగాview అమికో లియో సిరీస్ MIL-స్పెక్ MG డౌన్‌లైట్ | అధిక పనితీరు గల LED ఫిక్చర్
అమికో లియో సిరీస్ MIL-స్పెక్ MG డౌన్‌లైట్‌ను కనుగొనండి, ఇది ఆసుపత్రి పరిసరాల కోసం రూపొందించబడిన 6-అంగుళాల రీసెస్డ్ LED ఫిక్చర్, ఇది 4000 ల్యూమెన్‌ల వరకు, 3500K-5000K రంగు ఉష్ణోగ్రత మరియు సరైన కాంతి ఉత్పత్తి మరియు ఉద్గారాల నియంత్రణ కోసం MIL-STD-461G సమ్మతిని అందిస్తుంది.
ముందుగాview అమికో 3-ఇన్-1 స్లిమ్ ప్యానెల్ LED రీసెస్డ్ డౌన్‌లైట్ ఇన్‌స్టాలేషన్ గైడ్
అమికో 3-ఇన్-1 స్లిమ్ ప్యానెల్ LED రీసెస్డ్ డౌన్‌లైట్ కోసం ఇన్‌స్టాలేషన్ సూచనలు మరియు స్పెసిఫికేషన్‌లు, కొత్త నిర్మాణం మరియు పునర్నిర్మాణ అనువర్తనాల కోసం ఎంచుకోదగిన CCT మరియు సులభమైన ఇన్‌స్టాలేషన్ పద్ధతులను కలిగి ఉంటాయి. భద్రతా హెచ్చరికలు, జాగ్రత్తలు మరియు వివరణాత్మక దశలు ఉన్నాయి.
ముందుగాview అమికో మెజెస్టిక్ సిరీస్ క్షితిజ సమాంతర హెడ్‌వాల్ సిస్టమ్ టెక్నికల్ స్పెసిఫికేషన్
అమికో మెజెస్టిక్ సిరీస్ హారిజాంటల్ హెడ్‌వాల్ సిస్టమ్, టూ-టైర్, నో చేజ్ మోడల్ (HW00-02T-P-MXXX) కోసం సాంకేతిక డ్రాయింగ్ మరియు సిస్టమ్ వివరాలు, కాంపోనెంట్ స్పెసిఫికేషన్‌లు మరియు ఇన్‌స్టాలేషన్ నోట్స్‌తో సహా.
ముందుగాview కాలిస్టో మల్టీఫంక్షన్ LED లైట్ - ఇన్‌స్టాలేషన్ మరియు నిర్వహణ సూచనలు
అమికో సోలార్ సిరీస్ కాలిస్టో మల్టీఫంక్షన్ LED లైట్ కోసం ఇన్‌స్టాలేషన్ మరియు నిర్వహణ గైడ్, భద్రత, గ్రిడ్, ఫ్లాంజ్ మరియు T-బార్ మౌంట్‌ల కోసం ఇన్‌స్టాలేషన్ విధానాలు, నిర్వహణ మరియు వారంటీ సమాచారాన్ని కవర్ చేస్తుంది.