స్టెల్ప్రో పల్సెయిర్ RWF0502W వాల్ ఫ్యాన్ హీటర్ ఇన్‌స్ట్రక్షన్ మాన్యువల్

ముఖ్యమైన భద్రతా సూచనలు

ఈ హీటర్‌ను ఇన్‌స్టాల్ చేయడానికి లేదా ఉపయోగించే ముందు అన్ని సూచనలను చదవండి. ఈ సూచనలను పాటించడంలో విఫలమైతే అగ్ని ప్రమాదం, విద్యుత్ షాక్, తీవ్రమైన గాయం లేదా మరణం సంభవించవచ్చు.

• విద్యుత్ కనెక్షన్: This heater operates on 240 Volts. All wiring must be performed by a qualified electrician and comply with national and local electrical codes.
• గ్రౌండింగ్: ఈ హీటర్ తప్పనిసరిగా గ్రౌన్దేడ్ చేయాలి.
• స్థానం: Do not install the heater near flammable materials, in areas where gasoline, paint, or other flammable liquids are stored, or where explosive dust is present. Maintain minimum clearances from walls and other objects as specified in the installation section.
• పర్యవేక్షణ: Close supervision is necessary when any heater is used by or near children or invalids, and whenever the heater is left operating and unattended.
• వేడెక్కడం: To avoid overheating, do not cover the heater. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• నిర్వహణ: Disconnect power at the main service panel before performing any maintenance or cleaning.
• థర్మోస్టాట్: A separate thermostat is required for operation and is sold separately. Ensure the thermostat is compatible with a fan-forced heater.

ఉత్పత్తి ముగిసిందిview

The Stelpro pulsair RWF0502W is a 240V wall-mounted fan heater designed for supplemental heating in various rooms such as bedrooms, home offices, and living rooms. It utilizes both convection and forced air heating methods to efficiently distribute warmth.

ముందు view of the Stelpro pulsair RWF0502W wall fan heater, showing the fan grille and lower air outlet.

Diagram showing the dimensions of the Stelpro pulsair RWF0502W wall fan heater: 17 1/8 inches (435 mm) height, 8 11/16 inches (220 mm) width, and 3 3/16 inches (80 mm) depth.

సంస్థాపన

ప్రీ-ఇన్‌స్టాలేషన్ చెక్‌లిస్ట్:

• ప్రధాన సర్క్యూట్ బ్రేకర్ వద్ద విద్యుత్ సరఫరా నిలిపివేయబడిందని నిర్ధారించుకోండి.
• సరఫరా వాల్యూమ్ అని ధృవీకరించండిtage matches the heater's rating (240V).
• Confirm you have a compatible wall thermostat (sold separately).
• Gather necessary tools: screwdriver, wire strippers, drill, level, measuring tape.

మౌంటు ఎంపికలు:

The RWF0502W heater can be either surface-mounted directly to the wall or recessed into the wall for a flush finish. Ensure adequate clearance from floors, ceilings, and adjacent walls as per local codes and manufacturer recommendations.

The Stelpro pulsair RWF0502W wall fan heater installed in a modern entryway, positioned below a plant and mirror.

The Stelpro pulsair RWF0502W wall fan heater installed on a blue wall in an entryway, with coats and shoes nearby.

విద్యుత్ కనెక్షన్:

This heater requires a 240V hardwired connection. Follow the wiring diagram provided and ensure all connections are secure and properly insulated. Connect the heater to a dedicated circuit protected by the appropriate circuit breaker.

Diagram illustrating the 240V hardwired connection for the Stelpro pulsair RWF0502W wall fan heater, showing wires connecting within a junction box.

1. Turn off power at the main electrical panel.
2. Remove the front grille of the heater to access the wiring compartment.
3. Connect the supply wires to the heater's terminals according to the wiring diagram. Ensure proper grounding.
4. Secure all connections with wire nuts and ensure no bare wires are exposed.
5. Reattach the front grille.
6. Install the external wall thermostat according to its manufacturer's instructions.

ఆపరేషన్

The Stelpro pulsair RWF0502W heater is controlled by an external wall thermostat (not included). Once installed and wired correctly, follow these steps:

1. పవర్ ఆన్: Restore power to the heater circuit at the main electrical panel.
2. థర్మోస్టాట్ సెట్టింగ్: Adjust the external thermostat to your desired temperature. The heater will activate when the room temperature falls below the set point.
3. ప్రారంభ ఆపరేషన్: During the first few minutes of operation, the heater may emit a slight odor due to the burning off of manufacturing residues. This is normal and will dissipate quickly.
4. ఉష్ణోగ్రత పరిధి: The heater is designed to operate within a temperature range of 5°C (41°F) to 30°C (86°F).

For optimal performance, avoid placing furniture or other obstructions directly in front of the heater's air outlets.

నిర్వహణ

Regular maintenance ensures efficient and safe operation of your Stelpro pulsair heater. Always disconnect power at the main circuit breaker before performing any maintenance.

• శుభ్రపరచడం:
  • హీటర్ యొక్క బాహ్య భాగాన్ని మృదువైన, d వస్త్రంతో తుడవండి.amp గుడ్డ. రాపిడి క్లీనర్లు లేదా ద్రావకాలు ఉపయోగించవద్దు.
  • దుమ్ము మరియు లింట్ పేరుకుపోవడాన్ని తొలగించడానికి గాలి తీసుకోవడం మరియు అవుట్‌లెట్ గ్రిల్‌లను క్రమానుగతంగా వాక్యూమ్ చేయండి.
• తనిఖీ: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified electrician for repair.
• No Lubrication: మోటార్ శాశ్వతంగా లూబ్రికేట్ చేయబడుతుంది మరియు అదనపు నూనె రాయడం అవసరం లేదు.

ట్రబుల్షూటింగ్

If your Stelpro pulsair heater is not operating correctly, consult the following table before contacting customer support.

స్పెసిఫికేషన్లు

వారంటీ

Stelpro products are manufactured to high standards and are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Stelpro webవారంటీ క్లెయిమ్‌ల కోసం మీ కొనుగోలు రుజువును ఉంచండి.

కస్టమర్ మద్దతు

For technical assistance, replacement parts, or further inquiries, please contact Stelpro customer service. Contact information can typically be found on the product packaging, the official Stelpro website, or by referring to the documentation included with your purchase.

Note: Always provide your product model number (RWF0502W) when contacting support.