STEALTH SAA-110T 10-Gallon High-Pressure Air Tank

1. పరిచయం

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your STEALTH SAA-110T 10-Gallon High-Pressure Air Tank. Please read this manual thoroughly before initial use and retain it for future reference.

The STEALTH SAA-110T is an auxiliary air tank designed for portability and ease of use. It holds up to 10 gallons of portable air at a maximum pressure of 225 PSI, suitable for various pneumatic tools. It features multiple quick couplers for enhanced work efficiency.

మూర్తి 1: ముందు view of the STEALTH SAA-110T 10-Gallon High-Pressure Air Tank.

2. భద్రతా సమాచారం

హెచ్చరిక: ఈ భద్రతా సూచనలను పాటించడంలో విఫలమైతే తీవ్రమైన గాయం లేదా ఆస్తి నష్టం సంభవించవచ్చు.

• Always wear appropriate personal protective equipment, including eye protection, when operating or maintaining the air tank.
• Do not exceed the maximum operating pressure of 225 PSI. Over-pressurizing the tank can cause it to rupture.
• Never move the air tank while it is pressurized. Depressurize the tank before transport.
• Before each use, inspect the tank for any signs of damage, corrosion, or leaks. Do not use a damaged tank.
• Ensure all connections are secure and leak-free before pressurizing the tank.
• Do not modify the air tank or its components. Use only genuine replacement parts.
• Keep children and unauthorized personnel away from the air tank during operation.
• Always drain moisture from the tank after each use to prevent corrosion and extend service life.
• This product is an air tank, not an air compressor. It requires an external air compressor for filling.

Figure 2: The SAA-110T Air Tank in a typical use environment. Note: This is an air tank, not an air compressor.

3. ఉత్పత్తి భాగాలు

Familiarize yourself with the various parts of your STEALTH SAA-110T Air Tank:

Figure 3: Labeled diagram of the SAA-110T Air Tank components.

1. Quick Coupler (1, 6, 7, 10): Connection points for air hoses and pneumatic tools. The SAA-110T includes 5 quick couplers.
2. Air Cock (2): Valve to control air flow to the quick couplers.
3. Safety Valve (3): Automatically releases pressure if it exceeds a safe limit. Do not tampఈ వాల్వ్ తో.
4. Tank Gauge (4): Displays the internal pressure of the air tank.
5. Handle Grip (5): Ergonomic, rubber-reinforced handle for comfortable transport.
6. Tool Gauge (8): Displays the regulated output pressure for connected tools.
7. Pressure Regulator (9): Adjusts the output air pressure to suit specific tool requirements.
8. ట్యాంక్ (11): The main pressure vessel, constructed from Q235B Steel.
9. Rubber Pad (12): Non-slip pads on the base for increased stability.
10. Drain Valve (13): Located at the bottom of the tank to release condensed moisture.

4. సెటప్

1. అన్‌ప్యాకింగ్: Carefully remove the air tank from its packaging. Inspect for any shipping damage.
2. ప్రారంభ తనిఖీ: Before first use, visually inspect all components, connections, and gauges for any signs of damage or loose parts. Ensure the drain valve is closed.
3. ప్లేస్‌మెంట్: Place the air tank on a stable, level surface. The rubber pads on the base provide stability.
4. Connecting to an Air Compressor: Connect your air compressor's output hose to one of the quick couplers on the STEALTH SAA-110T. Ensure the connection is secure.
5. ట్యాంక్ నింపడం: Turn on your air compressor and allow it to fill the SAA-110T tank. Monitor the Tank Gauge (4) to ensure the pressure does not exceed 225 PSI. Once the desired pressure is reached, turn off the compressor and disconnect the hose.

5. ఆపరేటింగ్ సూచనలు

1. Connecting Tools: Attach your pneumatic tool's air hose to one of the available quick couplers (1, 6, 7, 10). Ensure the connection is firm.
2. అవుట్‌పుట్ ఒత్తిడిని సర్దుబాటు చేయడం: Use the Pressure Regulator (9) to adjust the air pressure delivered to your tools. Turn the knob clockwise to increase pressure and counter-clockwise to decrease it. Monitor the Tool Gauge (8) for the output pressure reading.
3. Using Multiple Tools: The SAA-110T is equipped with 5 quick couplers, allowing multiple tools to be connected simultaneously. Adjust the pressure regulator as needed for the specific tool in use.
4. Depressurizing: When finished, disconnect tools. To fully depressurize the tank, open the Air Cock (2) or slowly open the drain valve (13) until all air has escaped.

Figure 4: The SAA-110T Air Tank in use with a pneumatic tool in a construction environment.

6. నిర్వహణ

Regular maintenance ensures the longevity and safe operation of your air tank.

• Drain Moisture: After each use, or at least daily, open the Drain Valve (13) at the bottom of the tank to release any accumulated moisture. This prevents internal corrosion.
• లీక్‌ల కోసం తనిఖీ చేయండి: Periodically check all connections, hoses, and the tank body for air leaks. A soapy water solution can be applied to connections to identify bubbles indicating a leak. Tighten connections or replace seals as necessary.
• శుభ్రమైన బాహ్య: Keep the exterior of the tank clean and free from dirt and debris.
• నిల్వ: Store the air tank in a clean, dry environment. Ensure it is fully depressurized before storing for extended periods.

7. ట్రబుల్షూటింగ్

8. స్పెసిఫికేషన్లు

Figure 5: Dimensions and key specifications of the SAA-110T Air Tank.

• మోడల్: SAA-110T
• ట్యాంక్ సామర్థ్యం: 10 గ్యాలన్లు
• గరిష్ట ఆపరేటింగ్ ప్రెజర్: 225 PSI
• ట్యాంక్ మెటీరియల్: Q235B స్టీల్
• Number of Quick Couplers: 5
• వస్తువు బరువు: 41.2 పౌండ్లు
• ఉత్పత్తి కొలతలు (L x W x H): 20" x 13" x 18"
• రంగు: నీలం
• శబ్దం స్థాయి: 65 Decibels (when filling from a compressor, tank itself is passive)
• సిఫార్సు చేసిన ఉపయోగాలు: Inflation, powering pneumatic tools

9. వారంటీ మరియు మద్దతు

The STEALTH SAA-110T Air Tank comes with a పరిమిత జీవితకాల వారంటీ. For warranty claims, technical support, or customer service inquiries, please refer to the contact information provided with your purchase documentation or visit the official Stealth webసైట్.

వారంటీ ధ్రువీకరణ కోసం దయచేసి మీ కొనుగోలు రుజువును ఉంచుకోండి.