1. పరిచయం
This manual provides detailed instructions for the safe and efficient use of your Link2Home Outdoor Wireless Remote Control Outlet. This device offers convenient remote control for outdoor electrical appliances and lighting systems.
2. ముఖ్యమైన భద్రతా సమాచారం
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Ensure the product is plugged into a Ground Fault Circuit Interrupter (GFCI) protected outdoor-rated electrical outlet.
- Do not immerse the unit in water. It is weatherproof, not submersible.
- Keep the unit and remote control away from children.
- Do not exceed the maximum electrical ratings of 15A/125VAC, 1875W Resistive, 5A/625W Tungsten, 1/2 HP.
- Always unplug the unit from the power source before performing any maintenance or cleaning.
- For outdoor use, ensure the outlet unit is installed at least 2 feet (0.6 meters) above ground level to prevent water ingress.
3. ప్యాకేజీ విషయాలు
అన్ప్యాక్ చేసేటప్పుడు అన్ని వస్తువులు ఉన్నాయని నిర్ధారించుకోండి:
- 1 x Link2Home Outdoor Wireless Remote Control Outlet Unit
- 1 x Remote Control (with CR2032 battery installed)
- 1 x ఇన్స్ట్రక్షన్ మాన్యువల్
4. ఉత్పత్తి ముగిసిందిview
The Link2Home Outdoor Wireless Remote Control Outlet consists of a main outlet unit and a handheld remote control. The outlet unit features dual grounded outlets and an indicator light.
Figure 1: Link2Home Outdoor Wireless Remote Control Outlet and Remote Control.
మూర్తి 2: క్లోజ్-అప్ view of the outlet unit, highlighting the indicator light and two grounded outlets.
5. సెటప్
- స్థానాన్ని ఎంచుకోండి: Select an outdoor location with a GFCI-protected outlet. Ensure the chosen location allows the outlet unit to be installed at least 2 feet (0.6 meters) above ground level.
- ప్లగ్ ఇన్: Plug the Link2Home Outdoor Wireless Remote Control Outlet unit into the outdoor-rated electrical outlet.
- పరికరాలను కనెక్ట్ చేయండి: Plug your outdoor lights, security systems, or other appliances into the dual grounded outlets on the Link2Home unit.
Video 1: Demonstrates the initial setup and plugging in of the outdoor remote control outlet.
6. ఆపరేటింగ్ సూచనలు
The Link2Home Outdoor Wireless Remote Control Outlet is pre-programmed for immediate use. You can control the connected devices using the remote control or the manual button on the outlet unit.
- రిమోట్ కంట్రోల్ ఆపరేషన్: Press the 'ON' button on the remote control to turn on the connected devices. Press the 'OFF' button to turn them off. The remote has a range of up to 100 feet in line of sight and can work through walls and doors.
- మాన్యువల్ ఆపరేషన్: Press the power button on the outlet unit itself to manually turn the connected devices ON or OFF.
Figure 3: The remote control offers a 100-foot range for convenient operation.
7. Pairing and Unpairing the Remote Control
Your outlet unit and remote control are pre-paired. If re-pairing is needed or you wish to unpair, follow these steps:
7.1. జత చేయడం
- Ensure the outlet unit is plugged into a live power outlet.
- Press and hold the ON/OFF button on the outlet unit for approximately 3 seconds. The indicator light will begin to flash slowly.
- Release the ON/OFF button on the outlet unit.
- Within 5 seconds, press either the 'ON' or 'OFF' button on the remote control. The indicator light on the outlet unit will stop flashing, indicating successful pairing.
7.2. Unpairing / Resetting
- Unplug the outlet unit from the power source.
- While pressing and holding the ON/OFF button on the outlet unit, plug the unit back into the power source.
- Continue holding the ON/OFF button until the indicator light starts flashing rapidly.
- Release the ON/OFF button. The indicator light will stop flashing, confirming the unpairing/reset process is complete.
Video 2: Detailed demonstration of pairing and unpairing the remote control with the outlet unit.
Video 3: Visual guide on how to reset and pair the outdoor remote control outlet.
8. ట్రబుల్షూటింగ్
| సమస్య | సాధ్యమైన కారణం | పరిష్కారం |
|---|---|---|
| Device not responding to remote. | Remote battery low or dead. Out of range. Obstructions blocking signal. Unit and remote unpaired. | Replace CR2032 battery in remote. Move closer to the unit. Remove obstructions. Re-pair the unit and remote (see Section 7.1). |
| Outlet unit has no power. | Not plugged in correctly. Power outage. GFCI tripped. | Ensure unit is fully plugged into a working outlet. Check household circuit breaker. Reset GFCI outlet. |
| Connected device not turning on/off. | Device itself is off or faulty. Unit is overloaded. | Check the connected device's power switch. Ensure total wattagఇ 1875W మించదు. |
Video 4: Troubleshooting guide for common issues with remote control outlets, including resetting.
9. స్పెసిఫికేషన్లు
| ఫీచర్ | వివరాలు |
|---|---|
| మోడల్ సంఖ్య | EM-OR650B |
| ఇన్పుట్ వాల్యూమ్tage | 125 Volts AC, 60Hz |
| గరిష్టంగా ప్రస్తుత | 15 Amps |
| గరిష్ట రెసిస్టివ్ లోడ్ | 1875 వాట్స్ |
| గరిష్ట టంగ్స్టన్ లోడ్ | 625 వాట్స్ |
| మోటార్ రేటింగ్ | 1 / X HP |
| రిమోట్ రేంజ్ | 100 అడుగుల వరకు (దృష్టి రేఖ) |
| రిమోట్ బ్యాటరీ | CR2032 (చేర్చబడింది) |
| కొలతలు (L x W x H) | 5.08 x 7.62 x 12.7 సెం.మీ |
| బరువు | 281 గ్రా |
| మెటీరియల్ | ప్లాస్టిక్, మెటల్ |
| ధృవపత్రాలు | FCC, ETL |
10. నిర్వహణ
- ఒక సాఫ్ట్ తో యూనిట్ శుభ్రం, damp వస్త్రం. కఠినమైన రసాయనాలు లేదా రాపిడి క్లీనర్లను ఉపయోగించవద్దు.
- Regularly inspect the power cord and plugs for any signs of damage. Discontinue use if damage is found.
- Replace the remote control battery (CR2032) when the remote's indicator light dims or it stops responding.
11. వారంటీ మరియు మద్దతు
This Link2Home product comes with a 1 సంవత్సరాల వారంటీ from the date of purchase. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Link2Home webసైట్.
